Parker has supplied a number of its servo products for use in an animatronic head that enables respirator seals to be tested by subjecting them to a wide variety of facial expressions and movements.
A computer-controlled head form has been developed by i-bodi in Buckingham that mimics just about every possible facial expression, plus talking, breathing and hyperventilating. It is designed for testing the integrity of the seal of a respirator against the face to a level never previously achieved.
Jez Gibson-Harris, designer of the head form and Managing Director of i-bodi, explains the reasons behind the project: "The facial seal is vital to the performance of any respirator. The state-of-the-art design has progressed so much in recent years that new standards of testing have become necessary. This required some innovative new ideas, some of which we transferred from our other business, Crawley Creatures, which makes animatronics for the film and TV industries, to a frightening level of realism."
The head form comprises a hard skeletal base structure covered in a variable-thickness silicone skin that represents the human face to produce a realistic locus surface upon which the respirators under test must sit. The first movement that affects the seal is breathing - and respirator designs often have to accommodate the heaviest breathing. i-bodi simulates this using a large bellows mounted beneath the head form, which is driven by a Parker ET Electrothrust cylinder actuator and SMH series servomotor under the control of a Compax 3 servo drive.
Parker's Compax and SMH ranges form the core of the company's servo portfolio. Available in single- and multi-axis variants and in a full range of sizes, they are typically used in handling applications, but also in highly developed mechatronic systems that integrate and synchronise multiple complex motion axes. A comprehensive library of software controls is available, and IEC 61131-3 compliant programming tools enable rapid programming.
Similarly, the ET Thrust cylinder is something of a Parker workhorse. Its simple robust design has made it a firm favourite of design engineers the world over for more than 20 years, while its precision build means it is both accurate and repeatable.
Parker assigned its mechanics specialist James Cadogan to liaise with the i-bodi team. He comments: "The drives that control the breathing had to be robust and flexible in their operation. Had the requirement just been for 'normal breathing' we could have used a much simpler system, but for realistic tests we need to be able to simulate heavy breathing, ragged breathing and massive inhalations and exhalations. This meant we needed to produce very fast accelerations and constantly high-speed changes of direction."
In fact the bellows forms part of the i-bodi DBM-01 digital breathing machine, which again has some unique software at its heart. For the most part, the tests are conducted with the bellows set for normal breathing, though it can also be set for moderate or heavy breathing or even panic and hyperventilating.
Realistic movements programmed
Cadogan says: "The regular settings are fairly standard sinusoidal motion profiles – commonly used in industrial applications. We could have just ramped up the speed for the extreme performance testing, but it would not have been particularly realistic. Instead, we wrote a non-regular pattern that included lots of sudden changes of speed and stroke – it makes the head look shockingly realistic."
There is a second set of movements, covering swallowing, talking and shouting, as well as facial expressions - especially jutting out of the lower jaw, a movement that is commonly made when under stress and which could easily unseat a seal. To simulate these, Jez Gibson-Harris and his i-bodi design team identified 13 points of articulation, including nine around the lips to simulate accurately the articulatory phonetics of speech. Each of these is driven by a servo motor located within the head and driven by sophisticated software developed in-house to simulate talking, breathing and facial movements.
A requirement of the design brief was that all of these drives be housed within the head form. Gibson-Harris comments: "To say that this was a challenge would be an understatement. In fact we ended up using the sort of servomotors found in remote control model aircraft. They are small, lightweight and we were able to adapt their mountings to fit the space available."
Some of the test sequences have the head conversing or reciting poetry, with uncanny realism. Others simulate more violent head movements as if a person were shouting.
A variant of the head form can be fitted with a heavy protective helmet or a constrictive CBRN (chemical, biological, radiation, nuclear) hood. Another feature is the ability to make the head 'sweat' using tiny valves at various points around the face to release variable amounts of a saline solution. For the head to be commercially viable it has to meet many international standards including UL, CUL and CE from several different countries, all of which i-bodi has secured.