MachineBuilding
px

Edale opts for SensPart's miniature contrast sensor FT 25-RGB

SensoPart UK Ltdvisit website

 

Speed and accurate differentiation of even the lowest contrasts are essential for detection of printing marks on continuous material. Edale, UK manufacturer of flexo printing presses, amongst other machinery, found that SensoPart’s miniature contrast sensor fulfilled both requirements when it came to replacing the standard sensors it previously used, saving not just space but also halving the costs.

Antony Neaves, Edale’s Senior Buyer, is entirely satisfied with the choice of the SensoPart product, and says: “Miniature contrast sensors are tailored precisely to our needs. Their small size means they can be fitted discreetly into our machine and we are extremely satisfied with their performance thus far.”

The Flexo printing press FL-3 from Edale is equipped with 15 contrast sensors. These sensors control the printing and die cutting processes on continuous paper or foil by identifying crop and registration marks on the material. The standard size contrast sensor had to be replaced by a more compact version.

With the miniature contrast sensor FT 25-RGB, SensoPart fulfilled all requirements: measuring just 34 × 20 × 12mm3, it is approximately only a fifth of the size of the previous sensor and its performance data is superior. Thanks to multi-colour analysis – the sensor automatically selects the optimum emitter colour (red, green or blue) for the given contrast – low or difficult contrasts, such as yellow printing marks on a white background, can be reliably detected. The requirement for a very fast print mark detection, due to the high web speed of up to 200 m/min is achieved by the switching frequency of 25kHz. It also has a short response time of 20 μs and a minimum jitter of 10 μs which guarantees accurate positioning and precise die cutting of the continuous material.

The teach concept of the contrast sensor FT 25-RGB has been customised, so that Edale could maintain the same operating concept of the previous sensor. The cost of purchase combined with savings achieved through the flexible mounting concept reduced costs by approx. 50 per cent – a welcome spin-off from the change by Edale.

For further information about SensoPart’s miniature contrast sensor, please go to www.sensopart.com.

 
© Copyright 2006-14 Damte Ltd.