MachineBuilding
px

Machinery Directive Harmonised Standards - new list

13 April 2011

MachineBuilding.netvisit website

 

A new list of Harmonised Standards for the Machinery Directive 2006/42/EC was published in the Official Journal (OJ) of the European Union on 8 April 2011. This can be downloaded as a PDF (1.38MB) and it supersedes previously published lists. Note that lists published in the OJ are the only ones having any legal standing; lists published on the European Commission website are only informative.

+++ STOP PRESS See also Machinery Directive Harmonised Standards, 5 June 2012 +++

The previous list, published on 26 May 2010, did not include EN ISO 13855:2010 Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body, which was published on 31 May 2010, but the new list does.

Another important addition to the new list is EN ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction, which combines the old EN ISO 12100 and EN ISO 14121-1.

Most of the changes to the list involve Type C standards (ie those applicable to specific classes of machine), though there are also some important additions relating to noise emissions, hydraulics and pneumatics.

Standards published for the first time in this latest list are:

  • EN 81-41:2010 Safety rules for the construction and installation of lifts — Special lifts for the transport of persons and goods — Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
  • EN 741:2000+A1:2010 Continuous handling equipment and systems — Safety requirements for systems and their components for pneumatic handling of bulk materials
  • EN 972:1998+A1:2010 Tannery machines — Reciprocating roller machines — Safety requirements
  • EN 1010-1:2004+A1:2010 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 1: Common requirements
  • EN 1010-2:2006+A1:2010 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 2: Printing and varnishing machines including pre-press machinery
  • EN 1012-1:2010 Compressors and vacuum pumps — Safety requirements — Part 1: Air compressors
  • EN 1175-1:1998+A1:2010 Safety of industrial trucks — Electrical requirements — Part 1: General requirements for battery powered trucks
  • EN 1175-2:1998+A1:2010 Safety of industrial trucks — Electrical requirements — Part 2: General requirements of internal combustion engine powered trucks
  • EN 1175-3:1998+A1:2010 Safety of industrial trucks — Electrical requirements — Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks
  • EN 1247:2004+A1:2010 Foundry machinery — Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines
  • EN 1493:2010 Vehicle lifts
  • EN ISO 3741:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for reverberation test rooms (ISO 3741:2010)
  • EN ISO 3743-1:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for small movable sources in reverberant fields — Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)
  • EN ISO 3744:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
  • EN ISO 3746:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
  • EN ISO 3747:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)
  • EN ISO 4254-11:2010 Agricultural machinery — Safety — Part 11: Pick-up balers (ISO 4254-11:2010)
  • EN ISO 4413:2010 Hydraulic fluid power — General rules and safety requirements for systems and their components (ISO 4413:2010)
  • EN ISO 4414:2010 Pneumatic fluid power — General rules and safety requirements for systems and their components (ISO 4414:2010)
  • EN ISO 11148-3:2010 Hand-held non-electric power tools — Safety requirements — Part 3: Drills and tappers (ISO 11148-3:2010)
  • EN ISO 11148-4:2010 Hand-held non-electric power tools — Safety requirements — Part 4: Nonrotary percussive power tools (ISO 11148-4:2010)
  • EN ISO 11148-6:2010 Hand-held non-electric power tools — Safety requirements — Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2010)
  • EN 12042:2005+A1:2010 Food processing machinery — Automatic dividers — Safety and hygiene requirements
  • EN 12043:2000+A1:2010 Food processing machinery — Intermediate provers — Safety and hygiene requirements
  • EN ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction (ISO 12100:2010)
  • EN 12158-1:2000+A1:2010 Builders' hoists for goods — Part 1: Hoists with accessible platforms
  • EN 12158-2:2000+A1:2010 Builders' hoists for goods — Part 2: Inclined hoists with non- accessible load carrying devices
  • EN 12601:2010 Reciprocating internal combustion engine driven generating sets — Safety
  • EN 12629-1:2000+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 1: Common requirements
  • EN 12629-2:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 2: Block making machines
  • EN 12629-3:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 3: Slide and turntable machines
  • EN 12629-4:2001+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 4: Concrete roof tile making machines
  • EN 12629-5-1:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Parts 5-1: Pipe making machines manufacturing in the vertical axis
  • EN 12629-5-2:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Parts 5-2: Pipe making machines manufacturing in the horizontal axis
  • EN 12629-5-3:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Parts 5-3: Pipe prestressing machines
  • EN 12629-5-4:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Parts 5-4: Concrete pipe coating machines
  • EN 12629-6:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products
  • EN 12629-6:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products
  • EN 12629-7:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 7: Stationary and mobile equipment for long line manufacture of prestressed products
  • EN 12629-8:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)
  • EN 12999:2011 Cranes — Loader cranes
  • EN 13113:2002+A1:2010 Tannery machines — Roller coating machines — Safety requirements
  • EN 13135-2:2004+A1:2010 Cranes — Equipment — Part 2: Non-electrotechnical equipment
  • EN ISO 14122-4:2004 Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders (ISO 14122-4:2004)
  • EN ISO 14122-4:2004/A1:2010 (amendment from August 2010)
  • EN 15774:2010 Food processing machinery — Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) — Safety and hygiene requirements
  • EN ISO 28927-4:2010 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 4: Straight grinders (ISO 28927-4:2010)
  • EN 60335-2-77:2010 Safety of household and similar appliances — Parts 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers IEC 60335-2-77:2002 (Modified)
  • EN 60745-1:2009/A11:2010 (February 2011 amendment to EN 60745-1:2009 Hand-held motor-operated electric tools — Safety — Part 1: General requirements IEC 60745-1:2006 (Modified))
  • EN 60745-2-5:2010 Hand-held motor-operated electric tools — Safety — Parts 2- 5: Particular requirements for circular saws IEC 60745-2-5:2010 (Modified)
  • EN 60745-2-14:2009/A2:2010, IEC 60745-2-14:2003/A2:2010 (July 2010 amendment to EN 60745-2-14:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for planers)
  • EN 60745-2-16:2010 Hand-held motor-operated electric tools — Safety — Parts 2- 16: Particular requirements for tackers IEC 60745-2-16:2008 (Modified)
  • EN 60745-2-17:2010 Hand-held motor-operated electric tools — Safety — Parts 2- 17: Particular requirements for routers and trimmers IEC 60745-2-17:2010 (Modified)
  • EN 60745-2-19:2009/A1:2010, IEC 60745-2-19:2005/A1:2010 (August 2010 amendment to EN 60745-2-19:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for jointers)
  • EN 61029-1:2009/A11:2010 (January 2010 amendment to EN 61029-1:2009 Safety of transportable motor-operated electric tools - Part 1: General requirements)

In addition, there are new versions of superseded standards as follows:

  • EN 115-1:2008+A1:2010 Safety of escalators and moving walks — Part 1: Construction and installation
  • EN 709:1997+A4:2009 Agricultural and forestry machinery — Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) — Safety
  • EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services — Safety requirements and testing
  • EN 1846-2:2009 Firefighting and rescue service vehicles — Part 2: Common requirements — Safety and performance
  • EN ISO 11204:2010 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)
  • EN 12254:2010 Screens for laser working places — Safety requirements and testing
  • EN 13001-2:2004+A3:2009 Crane safety — General design — Part 2: Load effects
  • EN 13684:2004+A3:2009 Garden equipment — Pedestrian controlled lawn aerators and scarifiers — Safety
  • EN ISO 13855:2010 Safety of machinery — Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010)
  • EN 14017:2005+A2:2009 Agricultural and forestry machinery — Solid fertilizer distributors — Safety
  • EN 61496-1:2004/A1:2008, IEC 61496-1:2004/A1:2007 (May 2010 corrigendum to BS EN 61496-1:2004 and September 2009 amendment to EN 61496-1:2004 Safety of machinery. Electro-sensitive protective equipment. General requirements and tests)

Status of EN 954-1

EN 954-1 is not included in the current list [see this article EN 954-1 harmonised to Machinery Directive 2006/42/EC - Ed]. However, Marie Poidevin of CEN has previously confirmed to MachineBuilding.net "In case of future omission, you can take for granted that the communication done by the EC in December on EN 954-1 is still valid and will remain valid up to Dec 2011." EN 954-1:1996 is mentioned in the list in a note alongside the entry for EN ISO 13849-1:2008 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design (ISO 13849-1:2006), where the date of supersession of EN 954-1 is given as 31 December 2011.

To keep up to date with further developments regarding Harmonised Standards for the Machinery Directive 2006/42/EC, subscribe to our free email newsletter.

 
© Copyright 2006-14 Damte Ltd.