MachineBuilding
px

Machinery Directive Harmonised Standards, 5 April 2013

19 April 2013

MachineBuilding.netvisit website

 

A list of Machinery Directive Harmonised Standards was published in the Official Journal of the European Union (OJ) on 5 April 2013. These Harmonised standards provide a presumption of conformity to the Machinery Directive 2006/42/EC. The complete list can be downloaded from the European Commission website (1.5MB PDF). This list of standards harmonised to the Machinery Directive supersedes all previous versions and has legal standing, unlike the lists published on the European Commission website that are only 'informative'. The information below has been extracted with care from the official list, but it remains the reader's responsibility to check the OJ list via the link above, and also to check the Machinery Directive page on the European Commission website for any newer lists.

+++ STOP PRESS See also Machinery Directive Harmonised Standards, 11 July 2014 +++

New and updated harmonised standards and amendments published in the list for the first time are as below.

  • EN 848-3:2012 Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines, which supersedes EN 848-3:2007+A2:2009 on 30 April 2013
  • EN 1870-7:2012 Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading, which supersedes EN 1870-7:2002+A1:2009 on 30 April 2013
  • EN 1870-8:2012 Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading, which supersedes EN 1870-8:2001+A1:2009 on 31 May 2013
  • EN 1870-15:2012 Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading, which supersedes EN 1870-15:2004+A1:2009 on 30 April 2013
  • EN 1870-16:2012 Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting, which supersedes EN 1870-16:2005+A1:2009 on 30 April 2013
  • EN ISO 11148-3:2012 Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012), which supersedes EN ISO 11148-3:2010 on 30 June 2013
  • EN ISO 11148-4:2012 Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012), which supersedes EN ISO 11148-4:2010 on 30 June 2013
  • EN ISO 11148-6:2012 Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012), which supersedes EN ISO 11148-6:2010 on 30 June 2013
  • EN ISO 11148-12:2012 Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148- 12:2012), which supersedes EN 792-12:2000+A1:2008 on 30 June 2013
  • EN 12159:2012 Builders hoists for persons and materials with vertically guided cages, which supersedes EN 12159:2000+A1:2009 on 31 May 2013
  • EN ISO 13849-2:2012 Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012), which supersedes EN ISO 13849-2:2008 on 30 April 2013
  • EN 16005:2012 Power operated pedestrian doorsets - Safety in use - Requirements and test methods
  • EN 16246:2012 Agricultural machinery - Backhoes – Safety
  • EN 16252:2012 Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
  • EN 16307-1:2013 Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
  • EN ISO 28927-12:2012 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 12: Die grinders (ISO 28927-12:2012)
  • EN 60335-2-36:2002 Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements (IEC 60335-2-36:2002)
  • EN 60335-2-36:2002/A11:2012, which supersedes the unamended standard on 21 December 2014
  • EN 60335-2-36:2002/AC:2007
  • EN 60335-2-37:2002 Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers (IEC 60335-2-37:2002)
  • EN 60335-2-37:2002/A11:2012, which supersedes the unamended standard on 21 December 2014
  • EN 60335-2-37:2002/AC:2007
  • EN 60335-2-42:2003 Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens (IEC 60335-2-42:2002)
  • EN 60335-2-42:2003/A11:2012, which supersedes the unamended standard on 21 December 2014
  • EN 60335-2-42:2003/AC:2007
  • EN 60335-2-47:2003 Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans (IEC 60335-2-47:2002)
  • EN 60335-2-47:2003/A11:2012, which supersedes the unamended standard on 21 December 2014
  • EN 60335-2-47:2003/AC:2007
  • EN 60335-2-48:2003 Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters (IEC 60335-2-48:2002)
  • EN 60335-2-48:2003/A11:2012, which supersedes the unamended standard on 21 December 2014
  • EN 60335-2-48:2003/AC:2007
  • EN 60335-2-49:2003 Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm (IEC 60335-2-49:2002)
  • EN 60335-2-49:2003/A11:2012, which supersedes the unamended standard on 21 December 2014
  • EN 60335-2-49:2003/AC:2007
  • EN 60335-2-65:2003 Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances (IEC 60335-2-65:2002)
  • EN 60335-2-65:2003/A11:2012, which supersedes the unamended standard on 21 December 2014
  • EN 61029-2-1:2012 Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches (IEC 61029-2-1:1993 (Modified) + A1:1999 + A2:2001), which supersedes EN 61029-2-1:2010 on 3 September 2015
  • EN 61029-2-9:2012 Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws (IEC 61029-2-9:1995 (Modified)), which supersedes EN 61029-2-9:2009 on 3 September 2015
  • EN 61029-2-11:2012 Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws (IEC 61029-2-11:2001 (Modified)), which supersedes EN 61029-2-11:2009 on 3 September 2015

Previous changes to Machinery Directive Harmonised Standards

Since 2011 MachineBuilding.net has analysed each new list of Machinery Directive Harmonised Standards published in the Official Journal of the European Union (OJ) and summarised the changes and additions. These previous changes to the Harmonised Standards can be seen by following this link:

Future changes to Machinery Directive Harmonised Standards:

To keep up to date with further developments regarding Harmonised Standards for the Machinery Directive 2006/42/EC, subscribe to our free email newsletter. You may also like to request a copy of the FREE MachineBuilding.net Guide to the New Machinery Directive 2006/42/EC.

 
© Copyright 2006-14 Damte Ltd.