Atlas Copco at Northern Manufacturing & Electronics 2014

02 September 2014

Atlas Copco Compressorsvisit website


Atlas Copco at Northern Manufacturing & Electronics 2014At Northern Manufacturing & Electronics 2014, Atlas Copco Compressors will be exhibiting its compressor ranges, including the reliable GA90+-160 range and the super energy-efficient VSD+ compressors.

On Stand A45 visitors will be able to hear about Atlas Copco’s GA 90+-160 range of oil-injected rotary screw compressors, which offer increased productivity levels and reduced operating costs. The new GA 90+-160 compressors include a wide range of energy savings features including an IE3 motor, no-loss water separator drain, energy recovery module and in-built dryers. The integrated dryer concept delivers clean, dry air to improve reliability and increase energy savings. With a reduced floor space, installation costs are also considerably reduced. Thousands of Atlas Copco GA air compressors are operating around the globe in applications such as power plants, mining, cement, glass and metal industries. The new GA 90+-160 range is the result of solid industry knowledge combined with innovative features.

Also on the stand will be a model from Atlas Copco’s GA 7-37kW VSD+ compressor range. Launched in 2013, and extended with smaller-sized models earlier this year that bring the benefits of VSD technology to the reach of smaller manufacturers, GA VSD+ compressors provide energy savings of 50 per cent on average, a 13 per cent leap in Free Air Delivery and a canopy less than half the size of traditional fixed-speed compressors. This breakthrough in energy efficiency is made possible by Atlas Copco’s own 100 per cent patented interior permanent magnet (iPM) motors which drive, and form the heart of, all GA VSD+ compressors.

Visitors will also be able to learn about other technologies from Atlas Copco that support sustainable productivity, including energy recovery systems, which enable as much as 94 per cent of the electrical energy used by an industrial air compressor to be recycled and redirected in the form of heated air or water, and AIRnet, a fast and easy to install compressed air pipework system.

In addition, there will be information on the stand about SMARTLINK, Atlas Copco’s data monitoring programme for compressors which intelligently gathers, compares and analyses data to help compressed air users improve maintenance and service efficiency.

Visit the company on Stand A45, Northern Manufacturing & Electronics 2014, 1-2 October 2014, Event City, Manchester, or go to to learn more about the compressor ranges available.

© Copyright 2006-14 Damte Ltd.