MachineBuilding.net Product Stories Archive
30 April 2009samos PRO modular safety controller is more economical The samos PRO is a new compact modular safety controller for machine and automation control from Wieland Electric. Part of the samos...
30 April 2009Zenon 6.22SP1 improves functionality and ease of use Copa-Data is upgrading its HMI/SCADA system zenon 6.22 with a service pack. Its smart keyboards are now even more powerful than before,...
30 April 2009LabVIEW and drivers simplify instrument control National Instruments is simplifying instrument control by offering the NI Instrument Driver Network (IDNet), which it describes as the...
30 April 2009Stored Energy Management System cuts fuel consumption Technology developed and manufactured by Parker Hannifin can help operators of commercial vehicles to cut both fuel consumption and...
29 April 2009Sensorless vector drives with control and communications Nord Gear's new SK 200E frequency inverter range combines sensorless vector drives with comprehensive control and communications...
28 April 2009Fibre-optic cable for energy chains withstands twisting Bus system problems can occur during twisting applications in energy chains, particularly with shielded data cables, because the...
24 April 2009Tough, high-performance bearings for mining machinery NSK has worked with global manufacturers of mining machinery to develop a package of tough, high-performance bearings that offer longer...
20 April 2009New low-cost, three-axis, tilt-compensated compass Inertial Aerosystems is introducing a new low-cost digital compass module manufactured by USA-based Honeywell. Designated the HMR 3400,...
17 April 2009Fanless embedded computer is rugged and energy-efficient Quanmax is releasing the QBox-1000, a pocket-sized fanless embedded computer that measures just 40mm high. The QBox-1000 is based on...
17 April 2009Vision inspection system suits bakery applications Tordivel Group, based in Oslo and with a Scorpion Vision office in Southampton, UK, has developed an optical inspection system for use...
16 April 2009Procter to exhibit Nelsa machine shop guards Procter Machine Guarding is relaunching the popular Nelsa range of machine shop guards, backed by a promise of high standards of customer...
13 April 200932-bit CAN controller comes with programming software Sensor-Technik believes it is the only independent control manufacturer that is offering a 32-bit CAN controller with free programming...
top 