Edinburgh Instruments is launching an extended range of low-cost wall-mounted infrared gas monitors that give accurate continuous sampling, measurement and display of target gas concentrations. Designated the Guardian range, it comprises three series.
The Guardian Plus series provides high-accuracy detection and measurement of either CO2 or CH4 gases, where detection level ranges of between 0-3000ppm and 0-100 per cent by volume are required to be monitored.
The Guardian SP series also provides high-accuracy detection and measurement of CO2, where detection levels between 0-1000ppm and 0-5000ppm by volume are to be measured. These monitors can also measure CO, where detection levels of between 0-1 per cent and 0-100 per cent are required, and N2O in the range of 0-1000ppm.
Finally the Guardian FR series provides high-accuracy detection and measurement of R-125, R-22 and other refrigerant gases including R134a, and where detection levels between 0-1000ppm and 0-3000ppm by volume are required.
Suitable for a wide variety of uses these wall-mounted units can detect gases from sampling points up to 30m away by using the integral sampling system. They incorporate a four-digit LCD and alarm setpoint controls in a tough plastic enclosure that has an IP54 rating against the ingress of particulates and water.
These innovative products measure 267 x 258 x 148mm and weigh 2.5kg. They are easy to install and require the minimum of maintenance.
Edinburgh Instruments can also design and manufacture variants of this range to customers' requirements.
These versatile products have applications in the process, food, beverages, building, engineering, laboratory, food storage and manufacturing industries.
Follow the link for more information about these low-cost infrared gas monitors.