MachineBuilding
px

Parker announces new model for VSO LowPro Series

Parker Hannifinvisit website

 

Parker announces new model for VSO LowPro SeriesParker Hannifin’s Precision Fluidics Division is releasing its newest model for the miniature proportional valve VSO LowPro for OEMs looking for innovation in size, power, and manufacturability when controlling the flow rate of inert gases. The new model utilises a smaller orifice 0.030 in (0.76mm) within the same small VSO LowPro footprint (0.63 in/16mm wide by 0.55 in/14mm tall) that creates an unmatched combination of size and flow control between 0 and 30 SLPM. Typical applications for the new model of the VSO LowPro valve include pressure control, volumetric flow control and pulse dose control.

With the release of this new model Parker has expanded its pressure specifications for its new Model 3, and existing Model 4 and Model 5 valve up to 100 psi (6.9 bar) with flows up to 57 SLPM further increasing the range of capabilities within this platform. In addition, the VSO LowPro series focuses on reliability of operation and is qualified for up to 100 million cycles with a Reliability Factor of 0.96 and a Confidence Interval of 99 per cent. The VSO LowPro family also allows designers to reduce power or battery size due to an efficient typical power requirement of 1Watt.

Parker’s continued expansion of its VSO LowPro series provides engineers with a breadth of configurations including four orifice sizes ranging from 0.030” (0.76mm) to 0.080” (2.03mm), three voltage levels (5, 12 and 24 Volts) and manifold mount accessories to handle air, oxygen or any non-reactive, non-condensing gases, while complying with Reach, RoHS, CE, IP65 and ISO 15001 regulations. Parker Precision Fluidics is a market leader in miniature, low power, light weight and high performance fluidic products.

Follow the link for more information about the VSO LowPro miniature proportional valve from Parker.

 
© Copyright 2006-14 Damte Ltd.