MachineBuilding
px

New large GHS VSD+ vacuum pumps halve energy costs

Atlas Copco Compressorsvisit website

 

New large GHS VSD+ vacuum pumps halve energy costsAtlas Copco is extending its range of variable-speed driven vacuum pumps with the addition of three models offering flow rates up to 5004m3/h. The new GHS 3800-5400 VSD+ rotary screw pumps are particularly suitable for large industrial vacuum users in the UK's glass, plastics, canning and food packaging industries. According to Atlas Copco, companies in these sectors stand to reduce energy consumption by up to 50 per cent if they upgrade their existing centralised vacuum systems or switch from using multiple, decentralised point-of-use pumps to a central vacuum system based on one or two super-efficient GHS VSD+ machines.

Richard Oxley, Vacuum Product Manager for Atlas Copco in the UK, comments: "We see massive potential for further adoption of this technology in the UK and predict that the vast majority of large vacuum users in associated industries, potentially in excess of 90 per cent, could stand to halve the energy consumption of their industrial vacuum systems as a result. To ease the transition to a central vacuum system we are offering free vacuum energy audits to new customers and a 30-day no obligation trial of the technology on certain models.

"To illustrate this, I recently visited a company in the food packaging industry who we predicted could save in excess of £16,000 a year in energy costs by replacing their existing centralised system with a smaller number of GHS VSD+ pumps. Following this, an independent energy auditor was brought in to verify the results, while the pumps were on trial, who further upgraded the potential savings to the region of £20,000 a year."

Low operating costs

GHS VSD+ pumps provide significantly higher performance levels and reduced maintenance, noise and heat emissions compared to conventional oil-sealed and dry vane vacuum pumps. When installed as part of a central vacuum system, they can be used to precisely tailor vacuum production to meet customers' demand. All the pumps are equipped with easy-to-use Elektronikon controllers that can be integrated into a process control system and also control other manufacturers' vacuum pumps. They are also fitted with a Smartlink remote monitoring system and variable-speed drive (VSD), making them extremely economical to run. Additionally, the pressure set point control function ensures the pumps deliver the lowest possible vacuum flow with which the required vacuum can be maintained. As a result, no excess energy is wasted and life cycle operating expenses are significantly reduced.

Richard Oxley adds: "The payback period for a converted system is extremely short. The new units deliver more cubic metre per hour, per kilowatt than any other vacuum pump of comparable capacity."

Patented three-stage oil separator

Due to the extremely high oil retention capacity of the GHS VSD+, environmental impact at all operating pressures is significantly lower compared to similar oil-injected vacuum pumps. The range also now includes a patented oil separator that limits residual oil levels to a maximum of 3mg/m3. Oxley states: "This means the exhaust air is significantly more environmentally-friendly in comparison to other pumps on the market."

The cooling system is equipped with an electronic thermostatic valve that accurately controls the oil temperature. Consequently the oil retains its optimum consistency, as any entrainment of water to the oil cycle by condensation is avoided. The cooling system also operates with a speed-controlled fan to minimise energy requirements. The vacuum pumps in the GHS 3800–5400 VSD+ series are available with water or air cooling.

The GHS VSD+ range, which previously offered a maximum flow rate of 1810m3/h and has now been extended upwards to 5004m3/h, is specifically designed to reduce maintenance requirements and ensure life-cycle costs are kept low. For instance, there are no rotary vanes to replace and the patented, sturdy screw element does not require maintenance for many years (maintenance of the screw element is recommended at approximately 48,000 operating hours). In addition, intake filters and oil separators can be replaced without dismantling any piping. Service intervals are generally very long and operators can obtain information on any required maintenance work in a quick time by connecting the pump's integrated Smartlink remote monitoring system to a plant's communication network.

Compact, quiet and cool

Atlas Copco supplies GHS VSD+ pumps as part of a plug-and-play system within a single housing. Installation is very quick and simple, saving both time and space. The units have a smaller footprint than other pumps of comparable capacity: even the largest variant of the GHS VSD+ series (3800-5400) is less than 2m x 3m. The models are also claimed to be considerably quieter than comparable pumps and comply with environmental and energy management systems in accordance with ISO 50001 and 14001.

In addition, the technology enables shorter production cycle times because the pump reacts very quickly to changed process conditions in the pressure range relevant for the user. Meanwhile, the special inlet control valve, which is operated in close liaison with the variable-speed drive, further reduces energy consumption.

Optional energy recovery components can be integrated into the system, enabling users to recover a large amount of the heat that is unavoidably generated by compression without sacrificing pump performance. Atlas Copco reports that recoverable energy levels of about 75 per cent are possible in some applications. Energy recovery also keeps heat release in the vicinity of the units to a minimum. This means that air conditioning systems are not needed for nearby work stations, which is especially important in food packaging environments.

Follow the link for more information about the Atlas Copco GHS VSD+ rotary screw vacuum pumps.

 
© Copyright 2006-14 Damte Ltd.