Mouser Electronics is now stocking the IMC100 series, a new family of iMOTION motor control ICs from Infineon Technologies. These ready-to-use devices for high-efficiency, variable-speed drives integrate both the required hardware and control algorithm for a permanent magnet synchronous motor (PMSM).
Infineon’s IMC100 series motor control ICs are based on the company’s proven Motion Control Engine (MCE), which implements field-oriented control (FOC) and eliminates software coding from the development of motor control algorithms. The FOC uses single- or leg-shunt current feedback and space-vector PWM with sinusoidal signals to achieve high energy efficiency. The ICs also provide protection features like over- and under-voltage, over-current, rotor lock to safeguard the motor and power stage. The IMC100 devices provide highly flexible communication interfaces, including UART, SPI, I2C, analogue input, frequency input, and CAN.
The IMC100 series ICs are supported by the iMOTION Modular Application Design Kit for motor control (iMOTION MADK), EVAL-M1-101T evaluation control board, and EVAL-M3-102T evaluation board. The iMOTION MADK is a compact and flexible evaluation system that provides a scalable design platform for three-phase motor drives ranging from 20W to 300W. The EVAL-M1-101T evaluation control board and EVAL-M3-102T evaluation board connect to the iMOTION MADK and are capable of providing three-phase modulation or type 3 of two-phase modulation.
Infineon’s iMOTION IMC100 series ICs are well suited for motor control applications in home appliances, air conditioning units, fans, and pumps. To learn more, visit www.mouser.com/infineon-imotion-imc100.