The expanded functions within Wieland’s samos PRO COMPACT PLUS module enables comprehensive motion monitoring. Increasingly profound digitalisation and automation allows companies to respond more efficiently, more quickly and more flexibly. The progressively dynamic nature of processes and production sequences, however, also involve tougher requirements for the safety of man and machine. Against this background, Wieland Electric has upgraded its safety controller samos PRO COMPACT and made it fit for motion monitoring.
No matter whether machines, systems, autonomous vehicles, lifts or wind turbines – wherever movement is involved, there can be no compromise on safety. As processes become increasingly automated, the monitoring of motion continues to gain importance. This can be optimally achieved using safety controllers. The very reason why Wieland now has all functionalities needed for comprehensive rotational speed, rotational direction and position monitoring integrated in its samos PRO COMPACT.
The new Plus variant of the samos PRO COMPACT safety controller has six functions for reliable speed, position and direction monitoring. The motion sensors detect the required pulses up to 70kHz, which the controller converts to speed, angle, position and direction. The motion functions, which are implemented according to EN 61800-5-2, compare the actual values with the limit values: If a permissible limit value or range is exceeded, appropriate safety measures come into effect. Allowing the motor to be safely stopped, doors to be closed or locked, or even an additional alarm to be triggered.
A major benefit of this functional expansion: numerous safety functions can be realised with just one sensor element. Each functional module covers up to four ranges. In one controller, up to 25 rotational speed monitoring functions can be called up. This allows up to 100 speed or position ranges to be monitored by one basic module. In addition, the flexible units for limit values are proving to be practical for international use of the samos PRO COMPACT PLUS. Both the international SI standard system and the Imperial and US customary measurement system can be used.
The reliable SENC incremental encoder with HTL interface from Wieland Electric is available as an accessory. This allows speed and angle at the axes to be reliably measured, thereby achieving a PLe and SIL3 safety level. It is suitable for all the reliable speed, direction and position monitoring of all machines with referencing run and for automatic guided vehicles (AGVs). The SENC incremental encoder is available in sizes 58mm and 90mm with hollow and solid shafts and with the matching accessories.
Learn more about the samos PRO COMPACT PLUS module at www.wieland.co.uk.