Anixter Components will be launching its new product ranges for 2008 on Stand B31 at Southern Manufacturing. These ranges include crimp-on terminals, cable markers, heat-shrink tubing, cable and wire, and adhesives and tapes. Customers will also be able to pick up a copy of the company's new 2008/2009 catalogue, which gives easy access to more than 10,000 components for millions of applications.
This is the first time the company will be supplying cable and wire, and the company says that customers can now approach Anixter Components for all their cabling needs. The ranges of cable and wire on show will include flat cable (UL, BS and tri-rated types), equipment wires, mains cables and control cables.
The crimp-on terminals include popular formats such as ring, spade, blade and pin terminals for cables up to 6.0mm2, as well as copper tube crimp terminals for cables up to 95.0mm2. The cable marker range covers cable sizes from 1.0-7.0mm diameter in four standard styles. The markers are available with alpha or numeric markings as well as the standard electrical symbols. Heat-shrink tubing is available in two styles - 2:1 standard wall and 3:1 adhesive wall.
Anixter's range of adhesives on show will include the new Rite-Lok cyanoacrylates and anaerobic adhesives recently launched by 3M, as well as a range of structural and aerosol adhesives. The tapes will include filament packing tapes, masking tapes, duct tapes, foam tapes, transfer tapes and insulation tapes.
These new additions to the company's extensive range mean Anixter is truly a one-stop-shop for all cabling products. Its existing popular ranges include: PCB accessories; LED, transistor and bulb accessories; termination and insulation; motion dampers; rivets and panel fasteners; threaded fasteners and nuts; washers, insulators and bearing bushings; cable ties and accessories; strain relief bushings; liquid-tight fittings; cable protection, hole banking; caps and plugs; feet; knobs and handles; and security seals.
Anixter Components will be on Stand B31 at Southern Manufacturing on 6 and 7 February 2008 at FIVE, Farnborough.