Abssac is launching new stainless steel ball screws to complement its existing extensive ball screw ranges. Available in 6, 8 and 10mm diameters with leads of either 1 or 2mm, the new SUS series offers cumulative lead error of only 2x0.052mm per 300mm with an axial clearance of 0.020mm. The new SUS ball screw series is said to offer cost-effective performance compared to ground ball screws.
Capable of transmitting dynamic loads up to 2300N, the standard product is hardened to HRC55 as standard, including the flanged nut housing. Standard screw lengths that can be supplied machined ready to fit into an application are 300mm for the 6mm diameter and 400mm for the 8 and 10mm diameters.
Follow the link for more information about the range of linear products from Abssac.