Convert single-point locks with the multi-point cam adapter

FDB Panel Fittingsvisit website


Locks with single point cams can be readily converted to multi-point actuation with the new FDB adapter, which fits under the existing cam on typical quarter-turn locks. This enables rod lock systems to be attached either retrospectively or in order to simplify stock holding – where one lock can be held for both single and two or three-point closure systems.

This system also offers the further possibility of an additional rod for operating an internal cut-off switch. The multi-point cam adapter is suitable for quarter turn locks and swinghandles, thus spanning the range of medium-sized wall-mounted enclosures through to large cabinets for electrical or electronic controls, telecoms etc. Fitment is simple – involving removal of the existing single-point cam which then sits inside the adapter and is replaced with a standard screw, giving a simple quick and cost effective option.

Further information on FDB Panel Fittings products and services including the new multi-point cam adapter may be found at

© Copyright 2006-14 Damte Ltd.