MachineBuilding
px

FDB Rocfast now offers preformed mitred-and-joined frames

FDB Panel Fittingsvisit website

 

FDB’s self-gripping extruded gasket range has served specialist enclosure and cabinet builders well for many years, but fitting to square corners has always involved either cutting or deforming the gasket, so limiting the sealing degree achievable.

Recently, FDB introduced their radius corner adapter which creates rounded corners on the cabinet frame so enabling continuous flow of the gasket – useful for small numbers of installations.

Now FDB, under their Rocfast service banner, are offering preformed mitred-and-joined frames to fit custom cut-outs on a bespoke and pre-assembled basis. These frames incorporate right-angled joins or other angles to suit cabinet frames or door cut-outs for access covers. Typically a bubble style self-grip extrusion (or other profile) can be assembled and joined precisely to specification so that it may be rapidly installed to its pre-designated aperture. The corners are joined so as to preserve the gasket section and sealing performance, thus ensuring an optimum seal throughout.

Pre-joined gasket frames are suitable for small batches up to long production runs of cabinets or for use on motor vehicles, caravans, boats and similar. FDB believe that the corner radius adapter and the Rocfast pre-assembled frames offer a complete solution to many gasket installation problems.

Further information on FDB Panel Fittings products and services, including the Rocfast service and the self-gripping extruded gasket range may be found at www.fdb.co.uk.

 
© Copyright 2006-14 Damte Ltd.