MachineBuilding
px

Molex’s Super Sabre Connector System now at Mouser

Mouser Electronicsvisit website

 

Molex’s Super Sabre Connector System now at MouserMouser Electronics is now stocking the Super Sabre Connector System from Molex. Designed for a wide range of high-current, high-voltage applications that require design flexibility for wire-to-wire and wire-to-board configurations, the Super Sabre family of components offer the hybrid power and signal mating combinations that provide developers significant space and cost savings – all in a low-profile, small-pitch system.

Molex’s Super Sabre Connector System has a current rating per blade of 30A at 600V. The system’s combinations of power and signal enables designers to use a single connector housing to mate high-current and low-current power under 5.0A, while reducing size and total interconnect cost. All components in the family are fitted with a silver-plated interface that eliminates fretting corrosion while isolating terminals on both mating sides to protect against damage or shock.

The flat blade terminal design offers four points of electrical contact, and each component within the family features fully isolated terminals on both mating sides, positive latch and TPA features, and an optional UL1950 “Finger Test” certified blade.

Molex’s Super Sabre Connector System is available through Mouser Electronics in wire-to-wire and wire-to-board single-row, 2 through 6 circuit sizes, and is offered in a variety of positions, contact types and mounting angles. All components are lead free, RoHS compliant and provide an optional UL1950 “Finger Test” certified blade that meets “Finger Test” requirements for many consumer applications.

The Super Sabre Connector System from Molex is suited for networking and telecommunications, appliances, white goods, automotive, medical, and 100 to 600W power supplies. To learn more, visit www.mouser.com/molex-supersabre-connectors.

 
© Copyright 2006-14 Damte Ltd.