Texas Instruments MSP430i202x/3x/4x MCU now at Mouser

Mouser Electronicsvisit website


Texas Instruments MSP430i202x/3x/4x MCU now at MouserMouser Electronics is now stocking the MSP430i202x Mixed Signal Microcontroller Family from Texas Instruments (TI). This low-power 16MHz 16-bit RISC microcontroller has up to four 24-bit sigma-delta analogue-to-digital converters (ADCs) with differential programmable gain amplifier (PGA) Inputs. Additional features include a hardware multiplier, 75nA shutdown mode, and a temperature sensor.

The Texas Instruments MSP430i2020 Mixed Signal Microcontroller is the newest member of the TI MSP430 ultra low power 16-bit microcontroller family. The 24-bit sigma-delta ADCs are based on 2nd order, over-sampling sigma-delta modulators and digital decimation filters. The decimation filters are comb-type filters with selectable oversampling ratios of up to 256. This results in ADCs that have a high degree of resolution with a high degree of accuracy.

This microcontroller family comes with up to 32KBytes of Flash and up to 2KBytes of RAM. The MSP430 microcontroller is configured with two 16-bit timers with three capture/compare registers each, a 1.8V low dropout regulator, a brownout detector, and two enhanced universal serial communication interfaces. A 16×16 hardware multiplier supports signed and unsigned multiply, as well as signed and unsigned multiply accumulate.

The MSP430 microcontroller is built for low-power applications. This microcontroller family features several low-power modes including Active Mode current of 275uA/MHz at 16.384MHz, a Standby Mode with the watchdog timer active of 210uA, an Off Mode with full RAM retention of 70uA, and a lowest-power Shutdown Mode of just 75nA with a wakeup from Standby in only 1usec. Target applications include smart meters, power monitoring and control, and precision sensors.

Follow the link to learn more about the MSP430i202x Mixed Signal Microcontroller Family.

© Copyright 2006-14 Damte Ltd.