MachineBuilding
px

Cree 12GHz GaN HEMT-based MMICs now at Mouser

Mouser Electronicsvisit website

 

Mouser Electronics is now stocking the Gallium Nitride High Electron Mobility Transistor (HEMT) Monolithic Microwave Integrated Circuits (MMICs) from Cree. These new MMICs target X-band and C-band high-frequency applications.

Cree’s GaN HEMT-based MMICs are high-power high-performance Gallium Nitride transistors. Gallium Nitride (GaN) is a wide bandgap material used for high-power, high-performance semiconductors with electrical characteristics superior to conventional silicon devices, useful in many applications including power conversion systems. High-speed GaN devices demonstrate noticeable performance advantages in sensitive radar equipment, satellite radios, and broadband amplifiers.

These new Cree GaN MMIC transistors provide very wide signal bandwidths in a small footprint. Minimum power output is 25Watts for the Cree CMPA5585025F MMIC for 5.5 to 8.5GHz C-band communications. The Cree CMPA801B025F MMIC provides 25Watts for the 8 to 11GHz X-band frequencies used for radar and communications systems. The high-end Cree CMPA601C025F MMIC supports the X-band operating frequencies from 6GHz up to 12GHz at 35Watts. These GaN MMICs are available in screw terminal mountings.

Cree GaN MMIC transistors target high-precision, high-reliability, high-frequency applications such as marine and land-based radar systems, broadband radio amplifiers, point-to-point radio systems, satellite communications including uplinks, and test equipment amplifiers.

To learn more about the Cree 12GHz GaN HEMT-based MMICs, visit www.mouser.com/new/cree/cree-gan-mmics.

 
© Copyright 2006-14 Damte Ltd.