New version of REVO multi-sensor 5-axis measurement system

Renishaw plcvisit website


New version of REVO multi-sensor 5-axis measurement system Renishaw is launching REVO-2, a new improved version of the multi-sensor 5-axis measuring head for use on co-ordinate measuring machines (CMMs). REVO-2 and its new CMM controller UCC S5, build upon the successful REVO multi-sensor system with enhanced power and communications capability to carry the latest REVO sensors such as the RVP vision measurement probe. The head also has an increased range of movement in the negative A-axis which can improve part access and reduce the complexity of stylus set-ups.

REVO-2 incorporates Renishaw’s own ATOM optical incremental encoder system that combines miniaturisation with ruggedness and exceptional metrology performance. ATOM is described as the world’s smallest readhead using filtering optics. It offers speeds up to 20m/s (29,000 RPM on a 17mm disc) and resolutions to 1nm (0.004 arc second on a 108mm disc) with a range of linear and rotary (angle) scales available in stainless steel and glass.

REVO-2 is the only scanning system for CMMs that simultaneously controls the motion of three machine and two head axes whilst collecting workpiece data using its range of 2D and 3D tactile probes, surface roughness measurement probe and now non-contact vision probe too. The head’s novel design incorporates sophisticated laser measurement and electrical signal transmission technology for precise workpiece measurement at very high rates of data capture. The five-axis control system removes most of the unwanted dynamic errors associated with machine movement because the measuring head performs most of the work. As the head is much lighter and more dynamic than the CMM, it is able to quickly follow changes in the part geometry without introducing harmful dynamic errors. The REVO-2 multi-sensor system is managed by the same I++ DME compliant interface as the original REVO product.

In recognition of the 5-axis measuring technology that has brought dramatic benefits to part inspection on CMMs, the REVO system has received multiple prestigious awards.

From 5th – 10th October 2015 at EMO 2015, visitors will be able to see the new REVO-2 system demonstrated by Renishaw in hall 5, stand D15. For further information, visit

© Copyright 2006-14 Damte Ltd.