MachineBuilding
px

Elesa VCT-LP series retained lobe knobs

Elesa (UK) Ltdvisit website

 

Elesa VCT-LP series retained lobe knobs“Where did I put that knob?” Well, Elesa have the answer – by putting a chain on their VCT-LP lobe knobs they have ensured that these vital clamping components need never be lost in the course of adjustment or disassembly/assembly.

The VCT range of male/female lobe knobs are a proven effective means of clamping components, workpieces, frames, disability equipment etc. with quick manual operation. Now the LP version of this series incorporates a simple modification with fitting of a retaining chain.

As with the rest of the VCT range the VCT-LP features an easy-to-use five-lobe design in high-resilience black polypropylene now fitted with a free-spinning retaining fork and chain. The chain is easily fitted to the equipment with a 4.8mm self-tapping screw or similar.

Lobe knobs in the VCT-LP series are available in 25mm to 63mm dia. sizes and M5 to M12 thread sizes.

Further information regarding Elesa products, including the VCT-LP lobe knob, may be found at www.elesa.com.

 
© Copyright 2006-14 Damte Ltd.