Mouser Electronics is now stocking the MEAS weather shield for Arduino/Genuino from TE Connectivity (TE). The MEAS weather shield integrates five TE environmental sensors onto an Arduino/Genuino 101- and Uno R3-compatible board.
TE’s MEAS weather shield for Arduino/Genuino provides the necessary hardware to interface the TE HTU21D digital relative humidity sensor, MS5637 digital barometric pressure sensor, TSYS01 temperature system sensor, MS8607 digital relative humidity and digital pressure sensor, and TSD305-1C55 digital thermopile sensor. In addition to Arduino/Genuino-compatible headers for I2C communication, the board offers a 64-pad prototyping area for soldering external devices.
The HTU21D sensor is a self-contained humidity and temperature sensor with selectable resolution that measures relative humidity (RH) from 0 to 100 per cent and temperature from minus 40 up to 125degC. The MS5637 pressure and temperature sensor includes a high-linearity pressure sensor that measures pressure from 300mbar to 1200mbar, as well as an ultra-low power 24 bit analogue-to-digital converter (ADC) with internal factory-calibrated coefficients.
The TSYS01 temperature system sensor combines a temperature-sensing chip and a 24-bit ADC, and features a low power stand-by mode for power-sensitive applications. The TSYS01 offers a measurement range of minus 40 up to 125degC with accuracy from 0.1 to 0.5degC. The MS8607 pressure, humidity and temperature sensor is suitable for weather station applications embedded into compact devices, offering an extended pressure range of 10 to 2000mbar. The TSD305-1C55 is a contactless temperature measurement system that includes an infrared sensor (thermopile) and a sensor signal conditioner. The TSD305-1C55 measures temperature from 0 to +100degC with accuracy up to +/-1degC.
Follow the link to learn more about the MEAS weather shield.