With the EAS-reverse, mayr power transmission has developed a new, disengaging torque limiter on which all functional processes can be automated through the drive. It is easy to handle, permits long run-out times and re-engages again through slow backwards rotation. A housing also makes the clutch resistant to dust or water spray – and therefore suitable for use in heavy mechanical engineering.
In case of rough operating and ambient conditions such as dust, dirt, water spray, heat or cold, the drive lines, particularly in heavy mechanical engineering, are frequently encapsulated and therefore hard to access. But these machines in particular require reliable overload protection. Therefore, mayr power transmission has now developed with the EAS-reverse a robust, disengaging torque limiter that can withstand both high loads and which automatically re-engages – which is useful for drives for which there is no access for re-engagement.
On the EAS-reverse torque limiter, all functional processes can be automated via the drive alone. In case of overload, if the torque exceeds the value set on the clutch, a patented disengagement mechanism separates the input and output almost residual torque-free with high switch-off and repetitive accuracy. The kinetic energy from the rotating masses stored in the system can slow down freely. After responding, the clutch can withstand long drive run-out times. Through slow reverse rotation, the EAS-reverse torque limiter re-engages automatically without the use of pneumatics or hydraulics.
The new EAS-reverse torque limiter from mayr power transmission transmits the torque with exceptionally low wear (<0.05deg) and features hardened functional parts. It is easy to handle and represents adaptable, branch-optimised options with its numerous versions and additional characteristics. In this way, for example, the combination with an elastomer coupling permits easy separation of the drive line by loosening a few screws, without the motor or gearbox having to be displaced. In addition, applications with load-holding outputs can also be combined with a brake disk on the output side.
mayr’s EAS-reverse can also easily be integrated into a solid housing with standard IEC or NEMA dimensions. It is therefore protected against dust and water spray, and resistant to adverse ambient conditions. The new torque limiter already covers the first three construction sizes with a torque range from 80-2500Nm, and this range is now to be extended with a fourth size up to 5000Nm and a bore diameter of up to 100mm. The EAS-reverse provides permanent protection for machines and protects them reliably against overload damage, thereby ensuring operational safety and maximum productivity.
WARNING: follow the link for more information about the eas-reverse disengaging torque limiter}. Unrecognised tag Follow the link for more information about the EAS-reverse disengaging torque limiter}.