ADLINK Technology at Embedded World 2014 Nuremberg

SEMA-cloud, an IoT-based board management product

After the introduction of SEMA (Smart Embedded Management Agent) in 2013, ADLINK is introducing the next step for an IoT-based embedded board and system management combining cloud computing and fleet management technologies. SEMA cloud is a platform-independent system, supporting x86 and ARM processors, to allow remote access to all SEMA data and control functions. This enables location-independent monitoring, notification and remote controlling. ADLINK will demonstrate the SEMA-cloud on multiple platforms during the Embedded World 2014.

Five new COMs with Intel E3800 series (formerly Bay Trail)

ADLINK is introducing five new computer on modules based on the Intel ATOM E3800 series (formerly known as Bay Trail). The COM Express modules are available as compact size with Type 6 as well as with legacy supporting Type 2 pinout, (cExpress-BT, cExpress-BT2). The newest modules standard SMARC will have two implementations, one with full size (82mm × 80mm) and short size (82mm × 50mm); while featuring the same processors choices (single, dual and quad core), different DRAM options - including ECC - will be available. Both modules will feature HMDI and LVDS interfaces, Gigabit Ethernet, USB 3.0 and USB 2.0 as well as 12 GPIO. The fifth module based on the E3800 processor uses the existing Qseven format, for users that already have an existing carrier board.

First SMARC Module with Intel Quark SoC X1000

ADLINK will introduce the first Computer on Module using the new Intel Quark1000 processor. The module in the SMARC short format (82mm × 50mm) is the first Intel-based module with a power consumption of 2-3W, an area typically covered by ARM-based SoC. The module will feature the Intel Quark SoX X1000 with 400MHz, 2GB of onboard DDR3 memory, 2 PCIe Gen2 lanes, Ethernet, USB 2 host and device functions as well as other I/O interfaces. The modules with support WindRiver Linux 5 and Vxworks operating systems. To address the needs of embedded applications the module will be available in standard and extended temperature versions (product name LEC-X1000).

Intelligent Systems based on Intel Atom E3800, Core and XEON Processor

The line of embedded computers specialised for Industrial Automation will be expanded by several new products. Among them is the new expandable fanless embedded system MATRIX - MXE23000 with Intel ATOM E3800 processor, as well as the MATRIX - MXE5400 series with a fanless rugged system using the 4th generation Intel ATOM processor (formerly Haswell), and a new 4U server-grade extended server with dual XEON E5 processors with up to 4 PCIe x16 Gen3 expansion slots, 128GB DRAM w/ECC, multiple drive bays and redundant power supply options to ensure high reliability in all conditions.

Workload consolidation for industrial automation

Mixed workloads in industrial automation have typically led to multiple computer systems; with the introduction of Intel's Workload Consolidation Platform, a Hardware and Software combination is available to ensure rapid development and deployment. ADLINK will showcase such an approach using the MATRIX MXE5400 platform. In addition, Intel has chosen ADLINK as the hardware supplier for the development platforms.

To learn more about Adlink at the Embedded World Show, please go to www.adlinktech.com.