The new DAkkS-Accredited Torque Calibration machine developed by HBM means that the company is now the only commercial calibration laboratory in Europe able to provide calibration in the high torque range with sufficient delivery times.
As manufacturers and users of motor test benches tend to only accept calibration certificates from accredited calibration laboratories, this can often take up to 15 months. The new Torque Calibration machine from HBM, which is used by HBM as part of its in-house accredited calibration service, significantly speeds up delivery times, which is a often a competitive factor in project management.
HBM's new 400 kN.m torque calibration machine uses the principle reference of comparing the signal of the test specimen with that of the torque reference transducer (T10FH), which is integrated in the machine.
The HBM Torque Calibration machine is DAkkS accredited (per ISO 17025) and features a top measurement capability of 0.15 for the range of 3 kN.m (lowest step) up to 20 kN.m and of 0.1 per cent for the range of 20 kN.m up to 400 kN.m. This means the HBM calibration facility covers almost the complete range of the torque transducer portfolio.
HBM's new reference machine is vertically aligned and enables both clockwise and counter clockwise torque to be calibrated in compliance with the recognised standards DIN 51309 and VD1246. Featuring a proven measurement uncertainty of 0.1 per cent and international recognition of the calibration certificates, HBM is able to provide customers with an advanced torque calibration service.
Please visit www.hbm.com form more information about the DAkkS-Accredited Torque Calibration machine.
Millbrook Proving Ground
Station Lane
MK45 2RA
UNITED KINGDOM
+44 (0)1525 304980