Emparro67: power supply directly next to the load

Such losses occur if power supply units are used with an output voltage of 24V DC and the power is supplied to the loads with cables that are too long. By using Emparro67, the voltage is converted from 230V AC to 24V DC directly at the load. By doing this, the power loss is much lower and the energy costs are reduced.

Installing the power supply units outside the cabinet by using Emparro67 offers further benefits: smaller cabinets can be used, in some applications it may even be possible to completely get rid of the cabinets.

To make power supply units suitable for extreme environmental conditions, their components have to be protected from mechanical stress. That is why Emparro67's compact and rugged metal housing is fully potted and IP67 sealed. Dirt, humidity, and cooling lubricants cannot damage the components. This makes Emparro67 a universal unit for many different applications.

The single phase Emparro power supplies for IP20 applications have proven their energy efficiency in various applications. Their reliable active PFC technology is also used in Emparro67. This way, up to 92.4 per cent of the energy applied can be used.

Emparro67 converts almost no energy into heat, therefore it is always possible to touch the units, even when under full load and in high ambient temperatures. The units work reliably up to ambient temperatures of 85degC, which is exceptional for power supplies.

Another feature of Emparro67 is its power boost function. The units supply up to 150 per cent of the nominal current for a period of up to 4 seconds. High capacitive loads can be started without causing voltage drops. An integrated primary fuse provides additional protection of the unit.

Emparro67 power supply units are available in two models with output current of 4 and 8A - so you can select the model corresponding to the number of loads connected. For further details please visit www.murrelektronik.co.uk.