Festo is launching a new cost-effective compact air preparation service unit, the DB-mini. When compressed air consumption and energy costs are in focus, a correctly operating and carefully set air preparation unit such as the DB-mini is one of the simplest ways to improve profits. The DB-mini provides excellent filtration and flow performance while being simple to use and install.
Air preparation in pneumatic systems is essential to achieve reliability, performance and longevity of the pneumatic components. The lightweight, polymer-bodied DB-mini air preparation units reliably filter out contaminants including particles, dust, oil and water, reducing wear, contamination and potentially unhealthy exhaust elements. The regulator function simply reduces compressed air usage; many applications can reduce the operating pressure from 6bar to 4.5bar, immediately saving 25 per cent without any detrimental effects.
The DB-mini is suitable for all standard compressed air systems; modules include a manual, lockable isolation / dump valve, filter, regulator and for those applications that require an oil mist injection, a lubricator unit. Typical applications are almost universal but include workshops, small assembly and packaging machinery.
For its compact dimensions, the DB-mini provides a high flow rate of up to 2000Nl/min. Suitable for supply pressures up to 7bar, the 40¼m filter enables this series to achieve a purity class of 7.4.4 according to ISO 8573-1:2010.
Two of the module options are worthy of a closer look. The lockable manual on-off valve (HE) won an iF Design Award for its neat design. The vertical slide valve's function is to easily visually identify and understand the flow state; it saves space and provides simple padlock lock-off for ensured isolation during maintenance or to prevent unnecessary activation and wastage during stand down periods. The similar space-saving and lightweight distributor FRZ is half the width of the main unit and so is suitable for applications in tight-fitting spaces. The DB-mini is available pre-assembled meaning customers can benefit from ordering a single part rather than specifying each part individually and then having to assemble on site.
Steve Sands, product manager at Festo, says: "The cost-effective DB-mini is a welcome addition to our wide air preparation range. The high flow rate enables machine builders to install a more compact unit and possibly even downsize from a higher port size therefore saving more space and cost on their machine."
For further information on the DB-mini air preparation service unit visit www.festo.co.uk/DB-mini, or for more information about Festo's pneumatic and electric automation products visit www.festo.co.uk.