Level sensor with high corrosion resistance at competitive cost

For most level sensors, industrial application boundaries are set by the resistance of the wetted parts to aggressive media. This often leads to the selection of sensors that are built using special and costly materials. In some instances the materials used can limit the performance of the sensitive membranes used for hydrostatic measuring sensors.

ADZ's patented electron beam process deposits a PTFE layer between 0.5 to 1 micron thick which has no adverse performance influence on the stainless steel membrane and thin-film semiconductor diaphragm technology used for the PS1. In addition, the smooth plastic coating improves the contamination resistance of the IP68-rated sensor and significantly extends the cleaning intervals required for maintenance.

The PS1 series boasts an accuracy class of 0.5 per cent F.S. and covers measurement ranges from 0.1-25bar with standard output signals of 4"20 mA, and 3-wire 0...10V and 0"5V. From an operating voltage between 12 and 30V DC and a media temperature range of -40degC to 85degC, the sensor equally suits level and point measurement in waterways as well as tanks and vats. Where more aggressive media is used the PTFE option offers substantial additional protection, and ADZ NAGANO has also developed a new sealing system between the pressure-compensated power cable and housing that further improves performance.

Variohm EuroSensor provides complete pre-sale and post-sale application support across the ADZ NAGANO range which includes sensors for temperature, pressure, and flow. To find out more about the PS1 series level and point sensors, visit the Variohm website at www.variohm.com.