Murata's NM485D6S5MC isolated RS485 driver now at Mouser

Mouser Electronics is now stocking the NM485D6S5MC isolated RS485 driver DC/DC from Murata Power Solutions. Engineered for bi-directional data communication or multi-point bus transmission, the low-power, electrically isolated TTL data transmission device powers system circuitry through its three power options - an unregulated 6V supply, a -6V isolated supply, or a regulated 5V supply - which can eliminate the need for external components and supply all the functions on both sides of the isolation boundary.

The Murata NM485D6S5MC isolated RS485 driver is an EIA-485-compatible differential communications interface that enables data transmission at high rates over long distances. The built-in tri-state differential line driver and differential input line receiver both have active high and active low enable pins, allowing the device to be connected together to function as a direct control. This means the device can receive when the receiver enable pin is low and transmit when the driver enable pin is high. As the driver is active high, to reduce the power dissipation even further, designers can simply disable the driver when it is not transmitting data.

The NM485D6S5MC provides a 500kbps data rate and has been tested at 3000V ACRMS Hi Pot Test. The device features current limiting and thermal shutdown as well as short circuit protection at ambient temperatures down to -40degC. The SMD/SMT driver complies with ANSI TIA/EIA RS-485-A-1998 and ISO 8482: 1987(E) specifications, and offers a compact, low-power option for a wide range of half-duplex and full-duplex RS-485 computer and industrial serial interfacing and network configuration applications.

Follow the link to learn more about the NM485D6S5MC isolated RS485 driver DC/DC at Mouser.

Mouser Electronics

Artisan Building, Suite C, First Floor
Hillbottom Road
High Wycombe
HP12 4HJ

+ 44 (0)1494 467490

More products
19 hours ago
NSK roller guides increase uptime of blow moulding machines
A manufacturer of PET (polyethylene terephthalate) bottles frequently had to replace the linear guides on its blow moulding machines. However, after switching to NSK’s RA series roller guides, there have been no failures for over a year, producing annual cost savings in maintenance, spare parts and downtime of €60,000.
21 hours ago
Design your future at Design Engineering Expo 2022
With innovation at its core, Design Engineering Expo 2022 is the perfect place for forward thinking design engineering professionals to gain insight into new technologies, learn how to improve efficiencies and gain inspiration for ideas they can implement into their workplace, to put them ahead of their competitors and form part of their future strategy.
23 hours ago
Tray handling system gently handles medical-use glass cartridges
Gerresheimer Medical Systems Division produces over one billion high quality, medical grade, glass cartridges every year and central to its new post-production inspection and packaging system is the IEF Werner varioSTACK CF (Clean Factory) tray palletiser.
1 day ago
WDS reinforces stock availability with production machine upgrade
WDS Components has strengthened its stock availability of standard parts and components by upgrading its on-site production machinery.
2 days ago
Bostik present details of new 2K cyanoacrylate prototype
Bostik’s Born2Bond R&D team has released details of a new cyanoacrylate-based adhesive prototype at the ‘in-adhesives’ event, proving how products are being developed for a near-future that will see instant adhesives used for long-term critical applications.
5 days ago
Virtual factory and showroom tours provide access to best practices
Mitsubishi Electric is opening up access to its factory automation sites and showrooms through virtual tours with the aim of overcoming the restrictions on in-person visits caused by the pandemic.
5 days ago
Food-safe, tribo-optimised coating increases packaging throughput
A packaging and processing machinery builder has reduced drag, improved rigidity, increased throughput and raised hygiene standards on one machine family by applying an iglidur IC-05 tribo-coating on a mitre bar application.
5 days ago
Unlocking the benefits of micromotors at Design Engineering Expo
Small DC motor supplier EMS will be exhibiting the Faulhaber BXT-SC series and the AM3248 stepper motor at this year’s Design Engineering Expo, taking place at the NEC in Birmingham on June 8 to 9, 2022.
6 days ago
Advanced Engineering partners with SMMT and ADS
At this year’s Advanced Engineering UK, held at the NEC, Birmingham on 2-3 November, automotive and aerospace businesses will have the opportunity to meet with buyers from the sectors’ leading OEMs.
6 days ago
Telford based supplier has a handle on Truckman Tops
One of the UK’s best-known brands in the automotive aftermarket industry is Truckman, and the company’s new Truckman Classic hardtop for the Isuzu D-Max now features Vector T3 locking handles supplied by Industrilas.

Login / Sign up