OSRAM OSTAR Projection Power LEDs now available from Mouser

Mouser Electronics is now stocking the OSRAM OSTAR Projection Power LEDs from OSRAM Opto Semiconductors. These slim, high-luminance LEDs - based on advanced thin-film and UX:3 chip technologies - generate high luminous flux and radiant intensity previously unseen from a such a small surface area. The LEDs are specifically designed for projection applications, embedded projectors, machine vision, and 3D scanning and imaging.

OSRAM OSTAR Projection Power LEDs are available in two-, four-, or six-chip configurations on an insulated metal substrate (IMS) carrier board. The package provides a large surface area of thermal contact to help dissipate heat, which can improve the efficiency and lifetime of the LED. The connection between the chip and the heat sink results in a low thermal resistance of less than 0.5K/W, which causes heat to better dissipate and allows the system to operate up to its maximum output limit.

OSRAM OSTAR Projection Power LEDs are available from Mouser Electronics in three colours with high flux values: amber (1120-2800 lm), converted green (3150-8000 lm), and blue (8200-21000 mW). The compact external package dimensions of 27.0mm × 15.5mm offer a wide 120-degree beam angle at 50 per cent luminous intensity.

OSRAM OSTAR Projection Power LEDs provide a flat surface emission which enables excellent secondary optic interface. In addition, each LED module offers high current capability; direct current of 100mA to 5000mA (per chip), with pulsed currents per chip up to 6000mA (amber) and 8000mA (green and blue). The LEDs feature wide industrial temperature ranges of -40 to 100 (amber) and -40 to 125 (green and blue) degrees Celsius and can withstand up to 2kV of electrostatic discharge (ESD).

Follow the link for more information about OSRAM OSTAR Projection Power LEDs. Further information on LEDs can be found at Mouser's Lighting Applications site at www.mouser.com/applications/lighting.

Mouser Electronics

Artisan Building, Suite C, First Floor
Hillbottom Road
High Wycombe
HP12 4HJ
UNITED KINGDOM

+ 44 (0)1494 467490

uk@mouser.com

www.mouser.com

More products
1 day ago
Yamaha demonstrates the power of robot teamwork
Automatica 2022 saw Yamaha Motor Robotics FA Section demonstrating industrial robots working together autonomously to raise productivity and reduce waste.
1 day ago
Telsonic UK doubles floorspace to meet demand
Despite the numerous challenges which have been present over recent times, brought on by a combination of the pandemic and the changing business landscape, Telsonic UK has not only weathered the storm but has doubled the size of its Poole facility to meet increasing demand for its ultrasonic modules, systems, and ultrasonic automated solutions.
1 day ago
Delta helps packaging manufacturer centralise control of facility
As a result of expansion, a manufacturer of plastic bags for food packaging that operates a factory in Poland decided it had too many machines to continue monitoring and controlling them individually. It turned to Delta for a solution for centralised control and management.
1 day ago
Robot cell increases productivity in pneumatic valve assembly
When CME was approached to develop a fully automated solution for pneumatic valve assembly, a six-axis robot is at the heart of the innovative system.
2 days ago
Omron’s Flexible Manufacturing Roadshow comes to the UK
Omron has taken its European Flexible Manufacturing Roadshow on the road to Bradford, featuring exclusive demonstrations of cutting-edge, human-machine collaborative solutions not usually seen outside of a factory setting due to their size and scale.
2 days ago
Reliable cable guiding on industrial robots
By using the ROBOTRAX cable carrier system in combination with the innovative PBU pull back unit from Kabelschlepp Metool, automation expert Keba Industrial Automation was able to set up a realistic technology demonstrator. Reliable cable guiding was a key element of success.
2 days ago
RS recognises industrial players at annual awards event
RS has recognised some key industrial market players instrumental in aiding its commitment to meeting customer requirements through continual evolution of its offering, at the recent RS Connect First Choice Supplier Awards event.
2 days ago
Emka locking technology suits international enclosure OEM
Emka developed a special type and size for leading enclosure OEM Rittal, with the company completely relaunching its range of small and compact enclosures with the new AX and KX series.
2 days ago
Reliance supplies motion control parts to Malvern Panalytical
Reliance Precision has continued its relationship with Malvern Panalytical with the supply of high precision motion control parts for the company’s Zetasizer Advance instrument range.
3 days ago
Thorite embarks on nationwide branch refurbishment and recruitment
Air and fluid power specialist Thorite has launched a £200,000 investment project in its 10 sales and service centres to support its ambitious five-year growth plan.

Login / Sign up