Permanent coating provides a one-step option for rust treatment
Posted to News on 16th Feb 2016, 15:45

Permanent coating provides a one-step option for rust treatment

NCH Europe is launching Salvage 2+, a durable permanent coating product that prevents liquid from causing corrosion in infrastructure. Salvage 2+ has been designed to combat damage caused when liquid penetrates outer paint layers to reach the substrate and cause problems.

Permanent coating provides a one-step option for rust treatment

Salvage 2+ is an epoxy two-part formulation that is painted onto surfaces requiring protection. Unlike most rust treatment products on the market, Salvage 2+ combines the treatment and protection stages of rust prevention programmes into one simple step.

This is achieved by encapsulating rust and preventing it from causing further corrosion, while at the same time creating a protective layer that locks liquids out. Once loose rust has been removed the product can be directly applied to a rusty surface without the need for a primer.

The product's protective properties are a result of its composition; Salvage 2+ is made of a resin-based epoxy, mixed with micro aluminium and glass flakes to make the coating extra durable.

Peter Crossen, VP of the Maintenance and Partsmaster Innovation Platform at NCH Europe explains: "The hybrid technology of Salvage 2+ offers an innovative solution to rust protection that is ideal for busy environments where time is of the essence. The micro aluminium and glass flakes form a torturous route for liquids to penetrate, protecting the surface from creeping-rust without the need for additional coatings.

"The protection offered by Salvage 2+ isn't exclusive to water damage. It also encompasses other liquids such as oils and certain chemicals, making it ideal for use by maintenance engineers in automotive and construction applications."

The coating has been subject to extensive scribed hot salt spray testing, which determines how long it takes corrosion to penetrate substrate under adverse conditions. Salvage 2+ endures over 3000 hours of scribed testing, compared with the typical 500 hours exhibited by competitor products in the similar tests.

For more information about Salvage 2+ go to www.ncheurope.com/en.


NCH Europe

NCH House
Springvale Avenue
WV14 0QL
UNITED KINGDOM

+44 (0)1902 510254

Bosch Rexroth Mechan Controls Ltd ABSSAC Ltd SICK (UK) LTD Pilz Automation Ltd Procter Machine Safety Murrelektronik Ltd M Buttkereit Ltd Servo Components & Systems Ltd Kawasaki Robotics (UK) Ltd Leuze electronic Ltd PI (Physik Instrumente) Ltd Spelsberg Els UK Ltd HARTING Ltd Micro Epsilon UK Limited AutomateUK Machinesafe Compliance Ltd Rittal Ltd AutomateUK Euchner (UK) Smartscan Ltd WEG (UK) Ltd Phoenix Contact Ltd Aerotech Ltd STOBER Drives Ltd Heidenhain (GB) Ltd Dold Industries Ltd FATH Components Ltd