PXI products enhance precision DC applications

The NI PXI-4130 power SMU is a programmable, flexible, high-power 3U PXI module suited for precision DC applications. It features a single isolated SMU channel with a four-quadrant +/-20V DC output that incorporates remote four-wire sense. This channel can source up to 40W in quadrants I and III and sink up to 10W in quadrants II and IV. The PXI-4130 SMU has an additional power supply channel for voltage and current source and readback, combining an SMU with a power supply on a single PXI module. With five available current ranges offering measurement resolution down to 1nA, the PXI-4130 SMU is a precise and accurate instrument suited for test and design validation applications that require programmatic sourcing and sweeping of voltages and currents.

Ken Reindel, Director of Measurement Technology for National Instruments, says: "It has been interesting to see new innovations in analogue and FPGA-based architectures result in exceptional performance in a drastically smaller size. The NI PXI-4130 power SMU represents an excellent mixture of precision, power and compact size that enables engineers to apply the benefits of PXI to new applications."

Ultra-high-density modules

The NI PXI-2535 and PXI-2536 ultra-high-density modules offer 544 crosspoints, which is said to be the highest matrix density available for a single 3U PXI slot. The PXI-2535 is configured as a 4x136 one-wire matrix and the NI PXI-2536 is configured as an 8x68 one-wire matrix. The switch modules are built on field effect transistor (FET) technology, which offers new benefits including unlimited mechanical lifetime, unlimited simultaneous connections and switching speeds as high as 50,000 crosspoints per second. These features make the switches cost-effective for routing low-power DC signals when validating and testing mass-produced devices such as semiconductor chips. Engineers can use the new switches with NI Switch Executive switch management software for simple configuration and code re-use.

The SMU and high-density switches complement the numerous PXI instruments that engineers can use for semiconductor device validation including high-speed digital devices, mixed signal instruments and RF equipment. When combined in a PXI system, these instruments can create a flexible solution for both structural and functional semiconductor validation as well as general electronic component characterisation. These products also work with NI TestStand test management software, the NI LabVIEW graphical development environment, NI SignalExpress, NI LabWindows/CVI and NI Measurement Studio.

For more information, go to www.ni.com/modularinstruments or use the form on this page to request a callback or more information.