San - Antimicrobial
SELF-SANITISATION AGAINST BACTERIA AND FUNGI
78711-R,20
78710-R,10
78712-R,50
Corrosion resistance, ergonomics, compact shapes and great care in the choice of materials and finishes ease of cleaning
Components for construction vehicles, equipment and machinery which operate in particularly unfavourable conditions
High quality standards, precision in tolerances and care in surface finishes are requirements that ensure greater precision in operation
Clamping knobs, adjustable handles and self-locking pins for clamping operations in the field of photography, lighting and electronic equipment
Components to perform clamping and locking operations on machinery or equipment. Ergonomics and design combined with colours
Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.
Glossy zinc-plated steel or AISI 303 stainless steel, with threaded hole or threaded stud.
Polyamide based (PA) technopolymer, black colour.
Polyamide-based SUPER-technopolymer (PA), black colour.
Polyamide-based SUPER-technopolymer (PA), black colour.
Cam lever is a device which allows a quick and secure clamping.
The LAC-R model with adjustable ring-nut (ELESA patent) offers quick and secure clamping. The knurled ring-nut on the base allows to adjust the clamping force applied while locking the lever in the desired position.
Cam clamps with connection element, not drilled for a better cleaning (for sufficient quantities).
LAC-B, LAC-SST, LAC-B-R and LAC-SST-R with threaded hole. The screw where the cam lever is mounted must protrude from the assembly surface by a maximum length of h1 max from the end-stop as shown in table and Fig.1. The user will notice the h1 max value is reached as the screw rests on the end-stop in the connecting element.
Fine adjustment: rotate clockwise or anti-clockwise the knurled adjustable ring-nut to calibrate the clamping force and put the lever in the desired position. The ring-nut is marked with minimum and maximum adjustment values: half a turn is enough for adjustment.
Clamping: lower the lever whose fulcrum is an eccentric cam which controls the adjusting base by rotating.
Your request has been sent successfully