Posted to Products on Wednesday, September 13, 2017 Share:

Separator system from igus speeds up e-chain harnessing

Developed to combine the advantages of the E2/000 and E4.1 in one product range, the E4.1L energy chain system was developed specifically to save assembly time. In comparison with standard interior separation, the E4.1L "˜lean' features interior clip in slotted separators that provide up to an 80 per cent assembly time saving.

The E4.1L system is an energy chain suitable for protecting and guiding moving cables and hoses on applications of all kinds, where there must be an optimum relationship between technical requirements and economic efficiency. This innovative design of these lean separators enables layer-by-layer insertion of shelves and cables, and the savings are increased again by using the new lean honeycomb strain relief.

The E4.1L lean crossbars are openable from the top or either side, making the replacement or upgrading of existing harnessed cables very quick and easy. For more information about the E4.1L energy chain system, please visit www.igus.co.uk/wpck.

51A Caswell Road
Brackmills
Northampton
NN4 7PW
UNITED KINGDOM

+44 (0)1604 677240

sales@igus.co.uk

More from igus (UK) Ltd

New autoglide 5 system from igus doesn’t need a guide trough
Posted 1 week ago

Two-component 3D printing from igus
Posted 2 weeks ago

Help to identify the right iglidur plain bearing material
Posted 3 weeks ago

Energy chain reaches new heights
Posted 4 weeks ago

How motion plastics help make agriculture more sustainable
Posted 1 month ago

Energy chain helps generate environmentally friendly shore power
Posted 1 month ago

Strewth! igus helps team power through the Australian desert
Posted 1 month ago

New from igus: xiros film guide roller for labelling technology
Posted 1 month ago

igus opens new cleanroom laboratory
Posted 2 months ago

Side-mounted energy chain for high-speed linear robots
Posted 2 months ago

New hybrid cable for Bosch Rexroth MS2N and IndraDrive Mi motors
Posted 2 months ago

New linear and pivoting slide from igus
Posted 2 months ago

Fast entry into low-cost automation
Posted 3 months ago

igus video shows campers flushed with success
Posted 3 months ago

Reel advantage unveiled by igus
Posted 4 months ago

New igus video reveals key to low-cost automation
Posted 4 months ago

igus helps autonomous vehicles in ocean research
Posted 4 months ago

How to install hybrid linear guides on vertical surfaces
Posted 5 months ago

igus icom.plus module: predictive maintenance with flexibility
Posted 5 months ago

How polymer strain wave gears complement low-cost automation
Posted 5 months ago

CRM rotary module guides cables up to 4.5m long
Posted 5 months ago

New filament for 3D printing FDA-compliant, wear-resistant parts
Posted 5 months ago

igus launches standard range of wear-detecting plain bearings
Posted 5 months ago

e-spool flex cable drum: extension with no need for slip rings
Posted 5 months ago

3D printing of electrostatically conductive wear-resistant parts
Posted 5 months ago

igus virtual trade show introduces 100+ new products
Posted 5 months ago

Cable-type guide for energy chains is fast to install
Posted 5 months ago

Video shows 2020 new products from igus
Posted 5 months ago

igus drylin W linear systems for student spice vending machine
Posted 5 months ago

igus introduces Single Pair Ethernet cable for energy chains
Posted 5 months ago

Motion plastics for medical applications
Posted 6 months ago

igus e-skin energy chain certified to ISO Class 1 for cleanrooms
Posted 6 months ago

Larger igus drylin linear robots for cost-effective automation
Posted 6 months ago

Request an igus virtual visit on site or from your home office
Posted 6 months ago

igus adds two new sizes to twisterband HD family
Posted 6 months ago

Engineering plastics for applications in the bottling industry
Posted 6 months ago

Improved hybrid roller bearings for linear motion from igus
Posted 6 months ago

Video shows how igus iglidur PRT slewing rings are constructed
Posted 7 months ago

Award-winning SURTES Formula Student team uses igus cables
Posted 7 months ago

New video shows how igus energy chains make movement easy
Posted 7 months ago

igus intelligent plain bearings monitor wear
Posted 7 months ago

triflex R energy chains help robotic arms become collaborative
Posted 7 months ago

Video shows how to program synchronised robolink movements
Posted 7 months ago

igus e-chains now available with 36-month guarantee
Posted 7 months ago

igus increases drylin delta robot working space by factor of 10
Posted 7 months ago

Choice of drylin SHT options for use in extreme environments
Posted 8 months ago

Smart plastics EC.T sensor monitors e-chain glide bar condition
Posted 8 months ago

igus test lab: ensuring reliability under extreme conditions
Posted 8 months ago

igus tribo polymers are detectable and approved for food contact
Posted 8 months ago

Video shows how long-travel energy chain systems are tested
Posted 8 months ago

igus streamlines injection moulding using 3D printed tools
Posted 8 months ago

How to increase safety and reliability of cobots
Posted 8 months ago

Ultra-compact toothed belt axis suits small installation spaces
Posted 8 months ago

Connecting container ships to shore power
Posted 8 months ago

Ultra-slim igus chainflex M cables save installation space
Posted 8 months ago

Lubrication-free polymer spherical bearings replace metal types
Posted 9 months ago

Time is running out to enter the igus vector awards for 2020
Posted 9 months ago

igus invests £4M in pioneering plastic recycling firm
Posted 9 months ago

igus supplies machine tool maker with long-travel energy chains
Posted 9 months ago

How igus' VR experience transports people to German test lab
Posted 9 months ago

igus awards seek smart and cost-effective automation ideas
Posted 9 months ago

igus develops smart plastics app for Fanuc Field system
Posted 9 months ago

igus linear guides used in long jump competitions
Posted 10 months ago

igus launches first recycling programme for energy chains
Posted 10 months ago

Chainflex CFBUS cables are designed for dynamic applications
Posted 10 months ago

igus robotic arm stars in The Gadget Show celebrations
Posted 10 months ago

How igus e-spools help loudspeaker arrays fly
Posted 10 months ago

igus UK readycable assembly line cuts lead time to 24 hours
Posted 11 months ago

igus plain bearings used in medal-winning mono-skis
Posted 11 months ago

Video shows how igus E2.1 e-chains are easy and quick to use
Posted 11 months ago

igus bearings improve performance of automated guided vehicles
Posted 11 months ago

drylin handling systems help make light work of repetitive tasks
Posted 11 months ago

Online tool speeds configuration of igus drylin shafts
Posted 11 months ago

Ultra-slim slewing ring bearings are maintenance-free
Posted 11 months ago

Universal clamp supports energy chains and hoses on cobots
Posted 11 months ago

Young Falkland Islanders inspired by 3D printing thanks to igus
Posted 1 year ago

iglidur wear-resistant coatings can be applied directly to metal
Posted 1 year ago

Fast delivery of complex, wear-resistant 3D printed parts
Posted 1 year ago

e-skin soft and e-skin flat for particle-free cable management
Posted 1 year ago

3D printed parts improve usability of powered wheelchairs
Posted 1 year ago

Motion products for food and packaging equipment
Posted 1 year ago

iglidur plain bearing materials resist mould, bacterial growth
Posted 1 year ago

Video shows how twisterband guides cables for multiple turns
Posted 1 year ago

New material optimises insulation for igus chainflex cables
Posted 1 year ago

How "˜smart plastics' make maintenance intelligent
Posted 1 year ago

New online tool speeds selection of igus guide rollers
Posted 1 year ago

Movie of the month
Posted 1 year ago

Compact toothed belt axis supplied complete with drive motor
Posted 1 year ago

igus linear bearings used in childbirth simulator
Posted 1 year ago

igus launches chainflex Ethernet robot cable
Posted 1 year ago

Video shows e-chain inspired by nature and designed for industry
Posted 1 year ago

How long will my 3D-printed iglidur gear last?
Posted 1 year ago

Plastic-steel hybrid energy chain for extending-arm applications
Posted 1 year ago

Video shows sub-zero testing of igus cables in energy chains
Posted 1 year ago

iglidur maintenance-free plastic bearings for curfboard trucks
Posted 1 year ago

Compact, low-cost, maintenance-free automation
Posted 1 year ago

igus opens online shop for connectors
Posted 1 year ago

igus chainflex CAT5e and CAT6 cables approved for cleanrooms
Posted 1 year ago

e-loop energy chain improves cable management on drilling rigs
Posted 1 year ago

igus bar stock, plate and tube available for immediate delivery
Posted 1 year ago

drylin Q sliding plates offer simple tolerance adjustment
Posted 1 year ago

igus drylin delta robot tours the UK and Ireland
Posted 1 year ago

Next-gen igus E4Q energy chain for unsupported and long travels
Posted 1 year ago

SEW and Siemens motors chainflex hybrid cables: 3-yr guarantee
Posted 1 year ago

How dryspin technology benefits from high-helix threads
Posted 1 year ago

How to manage power and control cables reliably on cranes
Posted 1 year ago

New iglidur Q2E bearing withstands loads up to 130MPa
Posted 1 year ago

Standard e-chain for small/medium sizes is quieter and stronger
Posted 1 year ago

iglidur J350 high-temperature filaments for 3D printing
Posted 1 year ago

Free sample box of igus products for packaging machinery
Posted 1 year ago

readycable product finder has integrated service life calculator
Posted 1 year ago

CAT5e, CAT6 cables for e-chains have UL approval for US market
Posted 1 year ago

Lubrication-free ball transfer units with up to 500N capacity
Posted 1 year ago

Free webinar: Why gears should be 3D printed instead of machined
Posted 1 year ago

How the igus drylin delta robot handles delicate objects
Posted 1 year ago

Scottish offshore inspection equipment wins manus award 2019
Posted 1 year ago

500-ton crane benefits from igus energy chains
Posted 1 year ago

igus launches 120 new products, sales rise by 8.5 per cent
Posted 1 year ago

Chancellor Angela Merkel visits igus stand at the Hanover Fair
Posted 1 year ago

igus offers more than 370 DNV GL certified chainflex cables
Posted 1 year ago

igus E2 energy chain suits many hydraulic hose applications
Posted 1 year ago

igus adds more sizes to drylin W exchange range
Posted 1 year ago

igus energy chains, plastic bearings in de-icing aircraft
Posted 1 year ago

Plastic clamp attaches igus triflex R energy chains to cobots
Posted 1 year ago

How igus ready-to-use systems enhance warehouse efficiency
Posted 1 year ago

igus pop-up exhibition will come to you at your premises
Posted 1 year ago

Why you need to read the 2019 UK Manufacturing Review
Posted 1 year ago

Sealing rings extend service life of iglidur plain bearings
Posted 1 year ago

igus launches dryve D1 and D3 motor controllers
Posted 1 year ago

Intelligent monitoring of moving cables in smart factories
Posted 1 year ago

Wear-resistant iglidur plate ex-stock in additional grades
Posted 1 year ago

Zigzag e-chains manage cables for speaker and lighting trusses
Posted 1 year ago

igus tribo-SLS powder exceeds US vehicle fire safety standards
Posted 1 year ago

Video shows how energy chains guide and protect cables and hoses
Posted 1 year ago

Video shows how igus products simplify low-cost automation
Posted 1 year ago

Lower-cost chainflex data cable with UL approval
Posted 1 year ago

How high-performance polymer parts are used in utility vehicles
Posted 1 year ago

igus launches ice-chain for low-temperature applications
Posted 1 year ago

Southampton students select plastic bearings for Submarine Races
Posted 1 year ago

An overview of everything new from igus in 2018
Posted 1 year ago

New igus iglidur K230 material for clip and flanged bearings
Posted 1 year ago

Plain bearings for the food and beverage industry
Posted 1 year ago

igus launches performance series drylin T rail guides
Posted 1 year ago

Ready-to-connect igus readychain cuts assembly time
Posted 1 year ago

Complex kinetic sculpture benefits from igus e-spool guides
Posted 1 year ago

New chainflex CAN bus cable for highly dynamic applications
Posted 1 year ago

10 reasons to change from metal linear guides to plastic
Posted 1 year ago

igus to focus on low-cost automation at Southern Manufacturing
Posted 1 year ago

Lab equipment manufacturer achieves cost-effective automation
Posted 1 year ago

How igus technology is improving machine uptime
Posted 2 years ago

igus and Harting partner for reliable Ethernet transmission
Posted 2 years ago

Video shows new products from igus this autumn
Posted 2 years ago

All-in-one igus robolink DCi robotic arm and controller
Posted 2 years ago

igus industrial robot dresspack configurator saves time
Posted 2 years ago

3D printed plastic gears out-perform machined alternatives
Posted 2 years ago

See igus innovations at this year's Advanced Engineering Show
Posted 2 years ago

Video: drylin T versus recirculating ball bearing guides
Posted 2 years ago

igus to demonstrate robotic systems at Engineering Design Show
Posted 2 years ago

New reasons to change your metal bearings to iglidur bearings
Posted 2 years ago

Video shows how easy it is to assemble an igus Delta robot
Posted 2 years ago

Child safety device uses igus bearing
Posted 2 years ago

New 35m motor-powered e-spool from igus
Posted 2 years ago

Low-cost robotic joints incorporate gearing, BLDC motor
Posted 2 years ago

Low-cost Delta robot is set to be a 'game changer'
Posted 2 years ago

When is a robot not a robot? When it is a robolink ReBeL!
Posted 2 years ago

Movie of the month
Posted 2 years ago

Easy design, configuration and 3D printing of double gears
Posted 2 years ago

igus launches new modular motion concept - robolink Apiro
Posted 2 years ago

How to use igus DC motor controllers
Posted 2 years ago

igus launches new sizes and thicknesses of tribo-tape liner
Posted 2 years ago

Solar-powered buggy benefits from igus cables
Posted 2 years ago

igus launches next-generation intelligent cables
Posted 2 years ago

igus shows how to keep cables neat and tidy
Posted 2 years ago

Electric bike uses high-performance 3D printed triboplastics
Posted 2 years ago

How igus turned a child's buggy into an all-terrain vehicle
Posted 2 years ago

Online calculator for service life of 3D-printed plain bearings
Posted 2 years ago

Video showcases easy-to-open igus E2 micro energy chain
Posted 2 years ago

igus e-skin wins Fraunhofer clean technology award
Posted 2 years ago

How to set up drylin E linear robot motor controllers
Posted 2 years ago

Configure wear-resistant gear wheels with igus online tool
Posted 2 years ago

igus smart plastics increase plant safety, cut maintenance costs
Posted 2 years ago

igus supports Carologistics team at RoboCup German Open 2018
Posted 2 years ago

Why conventional cable reelers are being made redundant
Posted 2 years ago

iglidur A160 liner approved for food contact
Posted 2 years ago

How to change a drylin W bearing liner in less than 30 seconds
Posted 2 years ago

Potential applications of high-performance polymers in forklifts
Posted 2 years ago

drylin W Exchange: change the bearing liner directly on the rail
Posted 2 years ago

Integrated QR-code on e-chains offers easy part identification
Posted 2 years ago

igus showcase how to handle the pressure at Hillhead 2018
Posted 2 years ago

Missed the Hannover Show? 10 key launches at the igus stand
Posted 2 years ago

Stylish wine storage with 3D-printed igus springs
Posted 2 years ago

Safe cable guidance even in the most confined spaces with E2.10
Posted 2 years ago

New chainflex CFSOFT cables for fast movements in small spaces
Posted 2 years ago

igus tribopolymer bearings FAA-approved for aircraft interiors
Posted 2 years ago

igus energy chains and cables used in replacement lift bridge
Posted 2 years ago

Reliable igus parts for the packaging and labelling industry
Posted 2 years ago

igus intoduces leadscrew nuts made of iglidur E7 tribopolymer
Posted 2 years ago

igus' easy cable management systems at this year's ABTT show
Posted 2 years ago

How the igus speedigus service delivers customised parts fast
Posted 2 years ago

drylin E linear robot: configured online, delivered within 24h
Posted 2 years ago

How igus robotic technologies combine for low-cost automation
Posted 2 years ago

Module connect for electrical & fibre optic cables, pneumatics
Posted 2 years ago

xiros pillow block bearings for food & packaging industry
Posted 2 years ago

Secure bus communication even for hanging applications
Posted 2 years ago

How to achieve maximum rotation for a machine tool
Posted 2 years ago

igus presents tried and tested products at Automechanika
Posted 2 years ago

How an automated production plant uses igus e-chains
Posted 2 years ago

Low-cost robolink robot arm in a compact design
Posted 2 years ago

Squeezing a catamaran into a single berth: igus vector award
Posted 2 years ago

igubal for metallic pillow block and flange bearing housings
Posted 2 years ago

igus helps engineering artist and designer with 3D printing
Posted 2 years ago

3D printed grippers cost less and are quicker to manufacture
Posted 2 years ago

Five things you'd never have guessed were 3D printed
Posted 2 years ago

igus bearings used in drilling machine in bone fracture repairs
Posted 2 years ago

Drone technology benefits from the use of igus motion plastics
Posted 2 years ago

How retraction systems keep control of your cables
Posted 2 years ago

igus bearings and cable management systems at Subsea Expo
Posted 2 years ago

igus lean energy chain and curved rail systems at MACH 2018
Posted 2 years ago

How to connect 55m power cables from ship to shore
Posted 2 years ago

igus says YES to Edinburgh Uni team prototyping Hyperloop pod
Posted 2 years ago

How plastic bearings compare with metal ones in field test
Posted 2 years ago

New profiles for iglidur semi-finished engineering products
Posted 2 years ago

igus showcases smart innovations at Southern Manufacturing
Posted 2 years ago

Webinar: how low-cost automation can benefit your business
Posted 2 years ago

igus chainflex hybrid bus cables for Ethernet and Profinet
Posted 2 years ago

Energy chain applications wanted for vector award 2018
Posted 2 years ago

igus drylin ZLW Eco linear guide for low-cost positioning tasks
Posted 2 years ago

How the world really turns with igus
Posted 2 years ago

Bearings from igus help mapping specialist capture world in 3D
Posted 2 years ago

How the new drylin SHT configurator can help save the day
Posted 2 years ago

Modular cable feed system from igus for safe shore power supply
Posted 2 years ago

What you missed at this year's Motek with igus
Posted 2 years ago

How igus puts drylin through its paces
Posted 2 years ago

igus says YES to supporting GlitterBomb robot-building team
Posted 2 years ago

igus expands UK headquarters to boost engineering services
Posted 3 years ago

Ten top trends for modern machine tools
Posted 3 years ago

Front-loader test rig: plastic versus metal in endurance test
Posted 3 years ago

Curved linear guides from igus - Guidance for variable radii
Posted 3 years ago

Live demonstrations by igus at Manufacturing Management show
Posted 3 years ago

igus adds heavy-duty versions to drylin ZL linear guide range
Posted 3 years ago

Adapter saves cost by making straight connectors angled
Posted 3 years ago

igus expands additive production offering with iglidur i6
Posted 3 years ago

Polymer banknotes have longer lifetime compared with paper notes
Posted 3 years ago

How igus linear systems can help the Fukushima clean-up team
Posted 3 years ago

iglidur G1: similar price, double the performance to the "˜G'
Posted 3 years ago

How to create animatronics with robolink D
Posted 3 years ago

igus poised for action at this year's Advanced Engineering Show
Posted 3 years ago

iglidur HSD350: high-performance plastic for use in steam
Posted 3 years ago

igus white paper: how IIoT is transforming our world
Posted 3 years ago

How to guide and protect cables and hoses in land rigs
Posted 3 years ago

Aircraft inspection made easy: mobile fuselage inspection robot
Posted 3 years ago

igus to showcase lean manufacturing at Engineering Design Show
Posted 3 years ago

igus: tried and tested products on display at Offshore Europe
Posted 3 years ago

Movie of the month
Posted 3 years ago

guidefast control system for the manual control of indoor cranes
Posted 3 years ago

Video demonstrates extreme durability of igus lead screw module
Posted 3 years ago

Tribo-filament produces 3D printed parts for harsh applications
Posted 3 years ago

igus ibow allows easy angling of cable connectors after fitting
Posted 3 years ago

How to manage cables on robotic systems more reliably
Posted 3 years ago

igus cuts iglidur i3-PL SLS tribo-powder price by 30 per cent
Posted 3 years ago

How to install a safe shore power supply
Posted 3 years ago

Maintenance-free on the road with igus linear technology
Posted 3 years ago

How igus puts iglidur materials through their paces
Posted 3 years ago

igus d-rover provides RTG cranes with high-speed data
Posted 3 years ago

igus to showcase Industry 4.0 at Northern Manufacturing 2017
Posted 3 years ago

How to avoid guide wear on drive chains
Posted 3 years ago

New generation of smart plastics adds more intelligence
Posted 3 years ago

Antibacterial iglidur W160 tribo-tape for medical and lab use
Posted 3 years ago

How robust is a stainless steel leadscrew module?
Posted 3 years ago

igus gives articulated arm to the University of Southampton
Posted 3 years ago

New generation of low-noise energy chains from igus
Posted 3 years ago

How to manage energy supply safely to great heights
Posted 3 years ago

igus drylin SHT leadscrew module in stainless steel
Posted 3 years ago

Energy chains manage on-board cables and hoses
Posted 3 years ago

High-end chainflex series for confined spaces
Posted 3 years ago

Light, durable and food-safe: new xiros guide rollers from igus
Posted 3 years ago

How cycloidal gearboxes offer efficiency savings
Posted 3 years ago

Fully enclosed and heat-resistant: igus energy tubes
Posted 3 years ago

Long-life plastic gears from igus with iglidur I6
Posted 3 years ago

Save weight and money with GRP linear guides from igus
Posted 3 years ago

How to extend service life of plain bearings and reduce costs
Posted 3 years ago

Rapid parts in any igus material moulded in 3D printed tooling
Posted 3 years ago

Energy chain moulded from FDA-compliant material
Posted 3 years ago

How "˜lean' can igus energy chains be?
Posted 3 years ago

Find the right bearing fit with new igus Fit Calculator app
Posted 3 years ago

Highlights of Hannover Messe 2017 for igus
Posted 3 years ago

How robotics can make a book into a real page turner
Posted 3 years ago

igus medium voltage cable for long-travel crane installations
Posted 3 years ago

Vertical cable management using igus energy chain guide troughs
Posted 3 years ago

UBRacing prepares for its 20th year of Formula Student
Posted 3 years ago

iglidur L350 bearing rotates quickly, wears slowly
Posted 3 years ago

Improve productivity with readychain pre-harnessed energy chains
Posted 3 years ago

Building low-cost robotic systems with robolink, part 4: cabling
Posted 3 years ago

Standard modular "˜zig-zag' e-chain system now available at igus
Posted 3 years ago

Building low-cost robotic systems using igus robolink: part 3
Posted 3 years ago

Improving cable management for industrial cranes and gantries
Posted 3 years ago

Building low-cost robotic systems using igus robolink - part 2
Posted 3 years ago

igus drylin linear axis with fast dryspin high-helix threads
Posted 3 years ago

How to select the correct cable for moving applications
Posted 3 years ago

How to build low-cost robotic systems using igus robolink
Posted 3 years ago

igus LiveChat enables customers to get quick technical advice
Posted 3 years ago

Reduce noise with drylin linear bearings
Posted 3 years ago

Experimental race motorcycle uses igus plastic bearings
Posted 3 years ago

Predictive maintenance turns from an art to a science with igus
Posted 3 years ago

Custom linear axes 3D printed by igus within 48 hours
Posted 3 years ago

chainflex CF.INI sensor and actuator cables
Posted 3 years ago

igus harnessed dress-packs: cable protection for welding robots
Posted 3 years ago

Matthew Aldridge talks motion plastics
Posted 3 years ago

chainflex servo cable for machine tool applications
Posted 3 years ago

igus tribo-filaments take on the soapbox challenge
Posted 3 years ago

igus bearings help Rega glide to a vinyl revival
Posted 3 years ago

igus set to exhibit key products at Subsea Expo
Posted 3 years ago

igus hosts webinar entitled 'Cables: the weakest link?'
Posted 3 years ago

Inside the state-of-the-art igus dry-tech test lab
Posted 3 years ago

Compact rotation module for tight spaces from igus
Posted 3 years ago

igus bus cables for moving applications
Posted 3 years ago

Plastic plain bearings defy harsh conditions on tail lifts
Posted 3 years ago

robolink D 5-axis articulated arms now available pre-assembled
Posted 3 years ago

igus cables now have guaranteed temperature ratings
Posted 3 years ago

Moving plastics for train interiors from igus
Posted 3 years ago

iglidur A181 food and packaging bearing material
Posted 3 years ago

Smart plastics for predictive maintenance
Posted 3 years ago

Parallel guidance of corrugated tube simplified with an e-chain
Posted 3 years ago

International 2017 manus award now open for entries
Posted 3 years ago

igus showcases compact designs at Southern Manufacturing
Posted 3 years ago

New igus polymer material optimised for railway applications
Posted 3 years ago

igus readychain energy chain system
Posted 3 years ago

igus at the Engineering Design Show
Posted 3 years ago

Modular linear axes from igus for custom linear drives
Posted 3 years ago

igus robolink 4- & 5-DOF kits
Posted 3 years ago

Maintenance-free and very lightweight ball bearings from igus
Posted 3 years ago

igus autumn new products at Motek 2016
Posted 3 years ago

3D-printed tools: cost-effective injection-moulded parts
Posted 3 years ago

Movie of the month
Posted 3 years ago

igus introduces its largest energy chain for light robotics
Posted 4 years ago

The 3D printed house
Posted 4 years ago

igus robolink DQ + SQ
Posted 4 years ago

Lateral support for corrugated hoses from igus
Posted 4 years ago

Video shows linear guides following multi-radius curved paths
Posted 4 years ago

igus to showcase smart plastics at Manufacturing Management Show
Posted 4 years ago

igus humanoid open platform robot: watch the video
Posted 4 years ago

Free sample box of igus drylin W linear system components
Posted 4 years ago

igus to show smart plastics at the Advanced Engineering Show
Posted 4 years ago

igus smart plastics for industry 4.0 predictive maintenance
Posted 4 years ago

SLS 3D printing of iglidur components
Posted 4 years ago

igus showcases robotics at Engineering Design Show 2016
Posted 4 years ago

igus triflex RS dresspack compact universal module
Posted 4 years ago

Easy online ordering service for 3D-printed engineering plastics
Posted 4 years ago

Seven basic rules for good cables
Posted 4 years ago

P4 roller e-chain for cranes and conveyors
Posted 4 years ago

igus linear slides and cable management systems at Plasa Show
Posted 4 years ago

igus showcases automation, industry 4.0 technologies at NME 2016
Posted 4 years ago

iglidur Q290 bearing material endures harsh environments
Posted 4 years ago

igus Smart Plastics help to avoid unplanned downtime
Posted 4 years ago

Cardiff University utilises igus bearings for a smoother season
Posted 4 years ago

igus chainflex cables cope with demanding movements
Posted 4 years ago

igus bearings and tape assist drone defence system
Posted 4 years ago

Tribo tape liner from igus
Posted 4 years ago

iglidur I3-PL: wear-resistant tribo-powder for 3D SLS printing
Posted 4 years ago

Clever plastics for any bearing application with iglidur
Posted 4 years ago

e-spools ease PA speaker array manoeuvring in university venue
Posted 4 years ago

Easier industrial 3D printing with iglidur l150 tribo-filament
Posted 4 years ago

igus bearings and cable management systems at Automechanika
Posted 4 years ago

igus celebrates 25 years in the UK
Posted 4 years ago

e-chains tested in different chemicals
Posted 4 years ago

igus highlights from Hannover Fair 2016
Posted 4 years ago

Automated metal-finishing uses igus energy cable management
Posted 4 years ago

iglidur X - the high-tech problem solver
Posted 4 years ago

iglidur F2 antistatic bearings for ESD-compatible applications
Posted 4 years ago

Online 3D printing service with instant quotations
Posted 4 years ago

readychain speed 2.0 uses single action to connect all cables
Posted 4 years ago

robolink D components and kits for building collaborative robots
Posted 4 years ago

igus B160 iglidur tribo-tape for marine applications
Posted 4 years ago

Solving the productivity puzzle for OEMs with igus
Posted 4 years ago

Low-profile drylin N linear guide
Posted 4 years ago

drylin E - pick and place inspection flat gantry
Posted 4 years ago

igus e-chains for offshore applications
Posted 4 years ago

Easy-to-assemble e-tubes from igus
Posted 4 years ago

Unique energy chain applications wanted: the fifth vector awards
Posted 4 years ago

drylin ZLW toothed belt linear guide from igus
Posted 4 years ago

igus to show E4.350 plastic energy chain at Subsea Expo 2016
Posted 4 years ago

e-skin - an innovative energy supply
Posted 4 years ago

iglidur AB - antibacterial material for medical applications
Posted 4 years ago

igus celebrates 25 years of chainflex
Posted 4 years ago

igus drylin - smooth moving kitchen furniture
Posted 4 years ago

igus xiros rollers for packaging machines
Posted 4 years ago

iglidur on a front loader test rig
Posted 4 years ago

triflex RSE energy chain retraction system for industrial robots
Posted 4 years ago

drylin N linear guides from igus
Posted 4 years ago

igus readychain moving energy made easy
Posted 4 years ago

36-month guarantee on chainflex from igus
Posted 4 years ago

Easy unrolling of harnessed e-chains
Posted 4 years ago

Innovations from igus at Southern Manufacturing show
Posted 4 years ago

50 per cent time reduction when stripping chainflex cables
Posted 4 years ago

Movie of the month
Posted 4 years ago

Multi-direction drives for automated warehouses
Posted 4 years ago

chainflex cables avoid corkscrews
Posted 5 years ago

Further innovations from igus at the Advanced Engineering Show
Posted 5 years ago

igus presents Sly Agri with manus UK 2015 award
Posted 5 years ago

Carbon-fibre linear guide is ultra light and non-magnetic
Posted 5 years ago

e-skin: lightweight, versatile alternative to corrugated tubes
Posted 5 years ago

Energy supply system turns 20× around its axis
Posted 5 years ago

Extended iglidur tribo-tape range for automotive applications
Posted 5 years ago

Guidelite plus: the all-plastic guide trough system
Posted 5 years ago

igus introduces twisterband HD
Posted 5 years ago

iglidur L500 - self-lubricating high-speed runner
Posted 5 years ago

A-to-Z of iglidur self-lubricating plain bearings
Posted 5 years ago

igus e-chains help keep frost at bay
Posted 5 years ago

triflex R assembly from igus
Posted 5 years ago

'Porton Man' testing robot uses iglidur X plain bearings
Posted 5 years ago

igus readychains direct to your machine
Posted 5 years ago

guidelok slimline P: lightweight vertical energy chain system
Posted 5 years ago

Coping with cables on multi-axis robots
Posted 5 years ago

3D print filament and printing service from igus
Posted 5 years ago

Introducing e-spool power from igus
Posted 5 years ago

igus helps Formula Student racing team feed its need for speed
Posted 5 years ago

New tribo-tape developments from igus
Posted 5 years ago

igus products for extreme conditions at Offshore Europe 2015
Posted 5 years ago

Quick e-chain installation with zipper - watch the video
Posted 5 years ago

Your chance to see new gantries for XY, XZ and XYZ applications
Posted 5 years ago

e-spool power makes light work for lighting beams
Posted 5 years ago

igubal spherical bearings are quick and easy to install
Posted 5 years ago

How to change an e-spool spring
Posted 5 years ago

Robolink D: direct drive robotic arms from igus
Posted 5 years ago

How to assemble the igus e-spool
Posted 5 years ago

igus dryspin lead screw drives for high efficiency and low noise
Posted 5 years ago

CAT5/6/6A/7 Ethernet cable standards supported for energy chains
Posted 5 years ago

Key product highlights for igus at Hanover
Posted 5 years ago

igus to showcase polymer materials at PDM 2015
Posted 5 years ago

Special assembly tool for internal separators
Posted 5 years ago

Industry 4.0: realising the revolution, cables and energy chains
Posted 5 years ago

igus low-friction tribo tape improves endurance race reliability
Posted 5 years ago

drylin E flat gantry for test, measurement and labelling
Posted 5 years ago

Major investment in plain bearings by igus
Posted 5 years ago

Assembly tool for E2/000 e-chains
Posted 5 years ago

Easy assembly of chip-proof e-chain
Posted 5 years ago

igus igubal spherical bearing improves quickshift gearchange
Posted 5 years ago

drylin E gantries from stock for XY, XZ and XYZ applications
Posted 5 years ago

magsnap magnetic adapter keeps energy chains on track
Posted 5 years ago

Quick assembly tools for E4 e-chains
Posted 5 years ago

robolink drive units for articulated joints
Posted 5 years ago

Fast cable selection with readycable product finder
Posted 5 years ago

Video shows how to set up the igus PPDS
Posted 5 years ago

Offset adjustment for energy chains with FTA
Posted 5 years ago

robolink helps robots break free
Posted 5 years ago

Maintenance-free, quiet, clean and hygienic positioning systems
Posted 5 years ago

Products to help the medical industry from igus
Posted 5 years ago

guidefast: the quick e-chain trough for indoor cranes from igus
Posted 5 years ago

Best of robolink from igus
Posted 5 years ago

igus polymer products for medical applications at Medtec UK
Posted 5 years ago

igus announces manus awards 2015 are open for entries
Posted 5 years ago

Chainflex ASI bus cable for dynamic machinery applications
Posted 5 years ago

igus to focus on optimised production processes at show
Posted 5 years ago

"˜iglidur on tour' car completes UK leg
Posted 5 years ago

Square profile linear guide with adjustable clearance from igus
Posted 5 years ago

Considering the lengths of linear tables
Posted 5 years ago

drylin room gantry for 3D movements
Posted 5 years ago

igus absorbs handlebar shocks in concept bike
Posted 5 years ago

Easy lengthening and shortening of polymer e-chain
Posted 5 years ago

Connect and go with the new readychain speed from igus
Posted 5 years ago

Making linear module calculations easy
Posted 5 years ago

iglidur surpasses car endurance test around the world
Posted 5 years ago

Fast assembly of the world's largest polymer energy chain
Posted 5 years ago

Lose weight with the igus dry-tech diet
Posted 5 years ago

New e-tube for machine tools from igus
Posted 5 years ago

Direct drive robotic arms support lean automation
Posted 6 years ago

Robot mannequin "˜Porton Man' moves with igus
Posted 6 years ago

igus to exhibit new products at Advanced Engineering Show 2014
Posted 6 years ago

Eliminating bearing failure at low temperatures
Posted 6 years ago

igus e-chains in offshore applications
Posted 6 years ago

chainflex M cables guaranteed for 1 million double strokes
Posted 6 years ago

iglidur plastic filament for 3D printing low-friction components
Posted 6 years ago

Self-lubricating and quiet linear belt drive from igus
Posted 6 years ago

Secure cables in e-chains quickly and easily
Posted 6 years ago

Tribo makes all the difference in plastic bearings
Posted 6 years ago

igus unveils articulated robotic arm with 6 degrees of freedom
Posted 6 years ago

drylin Q now used in mobile control panels
Posted 6 years ago

igus says YES to University of Birmingham's Formula Students
Posted 6 years ago

Large-scale energy chain at Port of Felixstowe's rail traverser
Posted 6 years ago

RoHS update: environmental benefits of iglidur bearings
Posted 6 years ago

igus energy chains tame the tide
Posted 6 years ago

igus awards UK vector award for floating pontoon application
Posted 6 years ago

See igus products for machine builders and OEMs
Posted 6 years ago

Chainflex cables beat standard cables in dynamic applications
Posted 6 years ago

New and improved igus chainflex cables
Posted 6 years ago

e-spool provides power and data in all directions
Posted 6 years ago

Movie of the month
Posted 6 years ago

Automated coupling of energy chains for mobile equipment
Posted 6 years ago

Fully automatic coupling of e-chains for cranes
Posted 6 years ago

chainflex cables have DNV GL "˜Germanischer Lloyd' certificate
Posted 6 years ago

igus bearings drive on to championship victory
Posted 6 years ago

iglidur knife-edge rollers for conveyor applications
Posted 6 years ago

Pop-open e-chain provides easy access for cables
Posted 6 years ago

Wimbledon's roof glides with energy chains
Posted 6 years ago

igus expands its xiros polymer ball bearing range
Posted 6 years ago

speedicut rapid machining from igus now even more versatile
Posted 6 years ago

Fast assembly and quick connection for fully harnessed e-chains
Posted 6 years ago

igus Sales Engineers now all CSCS Certified
Posted 6 years ago

The car with plastic bearings travels the world
Posted 6 years ago

igus offers free on-site shows
Posted 6 years ago

Second-generation readycable finder from igus
Posted 6 years ago

Press fitting iglidur plain bearings made easy
Posted 6 years ago

igus plastics in 3D printers: lightweight and versatile
Posted 6 years ago

Corrosion-resistant e-chains for the deep
Posted 6 years ago

igus roadshow - request a visit to your premises
Posted 6 years ago

igus exhibits energy chains and bearings at ABTT 2014
Posted 6 years ago

E2 micro e-chains: small, light and even stronger
Posted 6 years ago

From pedals to steering, igus' bearings fit many applications
Posted 6 years ago

igus launches new interactive blog
Posted 6 years ago

igus to showcase bearing, e-chain and cable products at Hillhead
Posted 6 years ago

E4.1 light chain from igus is light and large
Posted 6 years ago

Power, data, air and media all in one system
Posted 6 years ago

igus dry-tech lab performs 7000 tests a year
Posted 6 years ago

Energy chain guide system enclosed for safe operation
Posted 6 years ago

Chainflex guarantee covers number of cycles performed
Posted 6 years ago

Modified car undertakes world tour to showcase iglidur bearings
Posted 6 years ago

igus scoops three iF design awards for innovative product design
Posted 6 years ago

Online technical data sheets available for chainflex cables
Posted 6 years ago

igus' dryspin technology offers more efficiency and less noise
Posted 6 years ago

Bearings for extreme outdoor applications such as solar panels
Posted 6 years ago

igus shows cable assemblies and readychains at MACH 2014
Posted 6 years ago

Chainflex hybrid servo cable with bus element for energy chains
Posted 6 years ago

chainflex custom cable configurator from igus
Posted 6 years ago

igus on tour for iglidur's 30th anniversary
Posted 6 years ago

igus drylin Q square linear guides with adjustable clearance
Posted 6 years ago

CFRIP from igus now extends to over 230 chainflex cable types
Posted 6 years ago

Enter the igus vector award competition 2014
Posted 6 years ago

14 new knife-edge, high-tech polymer roller dimensions at igus
Posted 6 years ago

Pillow block bearings for solar and food industries
Posted 6 years ago

Assembly tools cut energy chain opening times
Posted 6 years ago

igus to showcase compact readychain delivery system
Posted 6 years ago

igus triflex RSP for multi-axis robotics
Posted 6 years ago

igus bearings for high-load rotational applications
Posted 6 years ago

igus readychain light rack system slashes machine assembly costs
Posted 6 years ago

The igus automation range - plastics for longer life
Posted 6 years ago

igus manus UK award won for humanoid robot bearings
Posted 6 years ago

igus xiros ball bearings for multiple applications
Posted 6 years ago

Plain bearing linear axes for food and beverage applications
Posted 6 years ago

igus dry-tech sample box aids bearing selection process
Posted 6 years ago

High-performance xiros polymer bearings from igus
Posted 7 years ago

See how igus achieves high quality in bearings and energy chains
Posted 7 years ago

igus' robolink for multiple robot applications
Posted 7 years ago

Plastic parts from igus at Advanced Engineering Show 2013
Posted 7 years ago

Cables in less than 24 hours with igus readycable
Posted 7 years ago

iglidur bearing material is tested for durability
Posted 7 years ago

igus exhibits world's largest energy chain at Offshore Europe
Posted 7 years ago

Universal iglidur J gliding pads from igus
Posted 7 years ago

igus technology can reduce noise in wind turbines
Posted 7 years ago

Two new e-spool energy chain variants from igus
Posted 7 years ago

igus exhibits high-performance plastic bearings and robotics
Posted 7 years ago

Find the right product with free samples from igus
Posted 7 years ago

igus exhibits high-performance plastic bearings at DSEI 2013
Posted 7 years ago

igus exhibits largest plastic energy chain at Offshore Europe
Posted 7 years ago

Energy chains that are easy to install and cost effective
Posted 7 years ago

Easy-to-fill multi-axis energy chains from igus
Posted 7 years ago

igus introduces easy stripping to its chainflex range
Posted 7 years ago

igus food-grade bearings comply with EU 10/2011 and FDA specs
Posted 7 years ago

pikchain from igus has efficient continuous circular motion
Posted 7 years ago

Custom chainflex cables from igus available in just 3 weeks
Posted 7 years ago

igus exhibits new e-spool energy chain system at ABTT show 2013
Posted 7 years ago

Movie of the month
Posted 7 years ago

Video of the week - new stock plates from igus
Posted 7 years ago

igus exhibits maintenance-free plastic bearings at Subcon 2013
Posted 7 years ago

igus e-spool eliminates the need for slip rings on cable drums
Posted 7 years ago

igus speedifit service delivers complete sub-assemblies
Posted 7 years ago

New energy chains and cables for food industry applications
Posted 7 years ago

Dry-running linear systems enable lubricant-free operation
Posted 7 years ago

Energy chain system increases uptime for Jaguar Land Rover
Posted 7 years ago

Knife edge rollers for lubrication-free belt deflection
Posted 7 years ago

igus launches heavy duty igubal clip spherical bearings
Posted 7 years ago

Low-cost roller energy chain and guiding trough from igus
Posted 7 years ago

igus products defy woodworking dust for Routout
Posted 7 years ago

iglidur plastic bearings used for underwater applications
Posted 7 years ago

igus UK bearings and cabling at Southern Manufacturing 2013
Posted 7 years ago

igus to exhibit at International Armoured Vehicles 2013
Posted 7 years ago

igus energy chain protects huge extraction hose
Posted 7 years ago

igus bearings give dimensional stability when wet
Posted 7 years ago

Energy chains and cables used in giant astronomical telescope
Posted 7 years ago

Plastic bearings with self-lubricating properties run smoothly
Posted 7 years ago

igus linear drive modules for extreme conditions
Posted 8 years ago

British engineering celebrated with igus vector awards
Posted 8 years ago

igus bearings certified to medical standard
Posted 8 years ago

igus speedicut service delivers custom parts in 24 hours
Posted 8 years ago

Electrically conductive energy chains available within 24 hours
Posted 8 years ago

Wye Cylinders recommends igus polymer bearings
Posted 8 years ago

Free flexible cable guide and sample box from igus
Posted 8 years ago

igus DryLin R linear bearings save costs in particle analysers
Posted 8 years ago

Cost-effective plain bearing achieves fire-resistance standards
Posted 8 years ago

Miniature linear drives and cabling at Engineering Design Show
Posted 8 years ago

Maintenance-free plastic bearings enable cost savings
Posted 8 years ago

Bearings and energy chain systems meet tough camera applications
Posted 8 years ago

Movie of the month
Posted 8 years ago

Short movie demonstrates benefits of drylin W linear guide rail
Posted 8 years ago

Chainflex CFRIP cables are easy, quick and safe to strip
Posted 8 years ago

Drylin SLN-27 miniature linear drive with optional stepper motor
Posted 8 years ago

Condition monitoring system designed for long-travel e-chains
Posted 8 years ago

igus UK at Midlands Design & Manufacturing Show 2012
Posted 8 years ago

igus bearings, energy chains and chainflex cables at MACH 2012
Posted 8 years ago

Bearings from igus help enhance the movie and gaming experience
Posted 8 years ago

igus E6.1 energy chain is lighter, quieter and smoother
Posted 8 years ago

New xiros ball bearing materials from igus
Posted 8 years ago

New blue, metal-detectable igubal bearings for food industry
Posted 8 years ago

Blue iglidur A350 polymer plain bearings are FDA approved
Posted 8 years ago

New robolink multi-axis joint for robots and automation
Posted 8 years ago

Trailerteq wins igus UK manus Plastic Bearing Innovation Award
Posted 9 years ago

MBP Concepts wins igus UK manus Most Eye-Catching Design Award
Posted 9 years ago

See igus bearings, energy chains and cables at Interplas
Posted 9 years ago

Movie shows bicycle applications for polymer bearings
Posted 9 years ago

DryLin W plain linear bearings feature in short movie
Posted 9 years ago

Movie presents latest developments in polymer bearings
Posted 9 years ago

New movie shows versatility of igus energy chains
Posted 9 years ago

New catalogue of polymer bearings published by igus
Posted 9 years ago

E4.1 light saves weight in dynamic energy chain applications
Posted 9 years ago

Movie of the month
Posted 9 years ago

Energy chain innovations deliver benefits for machine builders
Posted 9 years ago

Detectable plastic bearings for food and drink machinery
Posted 9 years ago

See different material combinations used in plastic bearings
Posted 9 years ago

Films shows that iglidur is a girl's best friend
Posted 9 years ago

Explaining the options for DryLin plain linear bearings
Posted 9 years ago

Five-point checklist for specifying Energy Chains
Posted 9 years ago

Movie shows versatility of iglidur bearing materials
Posted 9 years ago

How to reduce the lead time for Energy Chains
Posted 9 years ago

Guidelok Slimline F guides requires less space
Posted 9 years ago

SLW Stop-and-Go features multiple carriages on one lead screw
Posted 9 years ago

Assembly tools save time when working on Energy Chains
Posted 9 years ago

New iglidur N54 environmentally-friendly bearing material
Posted 9 years ago

ReadyChains replace festoons to boost reliability
Posted 9 years ago

2011 Manus awards winners named by Igus
Posted 9 years ago

Igus Guidelok Slimline (SL) guides vertical energy chains
Posted 9 years ago

Linear actuators with polymer bearings and NEMA stepper motor
Posted 9 years ago

Igus celebrates 20 years of business in the UK
Posted 9 years ago

See igus P4 roller Energy Chain in action over long distances
Posted 9 years ago

See ReadyChain pre-assembled cables and carriers in action
Posted 9 years ago

MKM double-flange bearing is easy to install
Posted 9 years ago

See igus innovations at Midlands Design and Manufacturing
Posted 9 years ago

Energy chains for diverse applications on machine tools
Posted 10 years ago

Movie demonstrate Auto-Glide self-guiding energy chain
Posted 10 years ago

Single-wheel motorcycle trailer features igus bearings
Posted 10 years ago

New, improved TwisterChain circular energy chain
Posted 10 years ago

Movie explains DryLin WJRM hybrid linear bearings
Posted 10 years ago

Movie illustrates versatility of DryLin W linear guides
Posted 10 years ago

Movie shows xiros plastic ball bearings in action
Posted 10 years ago

Movie shows the world's largest energy chain in motion
Posted 10 years ago

Energy chain opening tool is easy and very quick to use
Posted 10 years ago

igus E-Rover conveys power and data for gantry cranes
Posted 10 years ago

Triflex RS energy chain module compatible with 100+ robots
Posted 10 years ago

Energy chains and Chainflex cables in crane applications
Posted 10 years ago

Plain linear guides offer advantages for robotic welding
Posted 10 years ago

Movie shows plain linear bearings in high-speed tests
Posted 10 years ago

Slewing rings with external toothed driving ring
Posted 10 years ago

Igus announces 2010 Vector Award winners
Posted 10 years ago

Movie explains Igus speedigus rapid moulding service
Posted 10 years ago

Igus unveils first continuously circulating energy chain
Posted 10 years ago

speedigus custom moulded plain bearings shipped in 24 hours
Posted 10 years ago

Guidelok Slimline avoids damage to hanging energy chains
Posted 10 years ago

TwisterBand energy chain is compact and cost-effective
Posted 10 years ago

CC-Link cable is designed for use in energy chains
Posted 10 years ago

Movie of the month
Posted 10 years ago

Energy chains keep hot swarf and chips away from cables
Posted 10 years ago

Igus iglidur bearing materials selected for ski bindings
Posted 10 years ago

Strain relief cable clamps for use with energy chains
Posted 10 years ago

Slewing ring bearings are more compact and cost-effective
Posted 10 years ago

New Igus products at Advanced Manufacturing show
Posted 10 years ago

DryLin rail guidance system for woodworking machinery
Posted 10 years ago

Slewing rings use self-lubricating, low-friction bearing pads
Posted 10 years ago

Plain bearing unit incorporates roller for low-friction sliding
Posted 11 years ago

Igus P4 energy chains offered in two new sizes
Posted 11 years ago

Technopolymer bearings - the advantages over alternatives
Posted 11 years ago

Continuous-flex cables - a buyer's guide
Posted 11 years ago

Cable carriers help to minimise automation downtime
Posted 11 years ago

Igus opens support centre in the Republic of Ireland
Posted 11 years ago

Applications demonstrate benefits of plastic bearings
Posted 11 years ago

Plastic energy chains last four times longer than steel
Posted 11 years ago

Chainflex cables offered with NFPA 79 approval
Posted 11 years ago

Featured photo
Posted 11 years ago

Test Drive Igus Energy Chains and Chainflex cables
Posted 11 years ago

Fibre-optic cable for energy chains withstands twisting
Posted 11 years ago

Energy-efficient energy chains and cables save money
Posted 11 years ago

Igus named 'Supplier of the Year' by IMA Klessmann
Posted 11 years ago

Igus releases QuickPin 2.0 online pinout configurator
Posted 11 years ago

Plain bearings last many times longer than linear guides
Posted 11 years ago

DryLin alternative to lead screw drives and pneumatics
Posted 11 years ago

E4.350 plastic energy chain is "the world's largest"
Posted 11 years ago

Expanded range of xiros polymer ball bearings
Posted 11 years ago

New lubrication-free, self-aligning plastic ball bearings
Posted 11 years ago

Igus unveils miniature high-temperature iglidur bearings
Posted 11 years ago

See energy chain innovations at Automatica 2008
Posted 11 years ago

E6 energy chain resists vibration better than alternatives
Posted 11 years ago

Antaris 2.5 wind turbine uses igubal self-aligning bearings
Posted 11 years ago

Igus bearings help mountain biker win Olympic gold
Posted 11 years ago

Self-lubricating polymer bearings out-perform bronze
Posted 11 years ago

E4.1 energy chain combines benefits of E4/4 and E4/100
Posted 11 years ago

Plain linear guide features adjustable clearance
Posted 11 years ago

Plain bearings help boost efficiency of solar energy plant
Posted 11 years ago

Access Igus energy chain data via a mobile phone
Posted 12 years ago

Igus P4 roller energy chains are quieter
Posted 12 years ago

Chainflex machine tool control cables are oil-resistant
Posted 12 years ago

Igus announces business expansion and Vector Awards
Posted 12 years ago

Plain bearings deliver environmental benefits
Posted 12 years ago

Igus launches GigE cable for dynamic applications
Posted 12 years ago

Energy chains and cables withstand Texan temperatures
Posted 12 years ago

Universal module suits cramped robot applications
Posted 12 years ago

Pre-harnessed energy chains save money for machine builders
Posted 12 years ago

Free energy chain inspections for summer shutdowns
Posted 12 years ago

Igus offers free samples to students and trainee engineers
Posted 12 years ago

Guidelok system keeps control of vertical energy chains
Posted 12 years ago

Machined plastic bearings have predictable lifetime
Posted 12 years ago

Chainflex CF Robot cable copes with torsional loads
Posted 12 years ago

Chainflex control cables gain UL and CSA approvals
Posted 13 years ago

New smaller version of DryLin ZLW belt-driven actuator
Posted 13 years ago

Innovative new products for dynamic power and data transmission
Posted 13 years ago

Ex-stock polymer bearings have predictable service life
Posted 13 years ago

Compact DryLin EasyTube linear unit is maintenance-free
Posted 13 years ago

Igus offers semi-finished bar stock and custom components
Posted 13 years ago

Regional robotics roadshow offers plenty to see
Posted 13 years ago

See new bearings and energy chains at Machine Building Show
Posted 13 years ago

Free samples of Energy Chains and Chainflex cables
Posted 13 years ago

Igus to show bar stock and cables at Southern Manufacturing
Posted 13 years ago

More products

14 hours ago

High-quality UK made ABS power supply cases

13A Plug-in and In-line styles from BCL Enclosures includes flame-retardant ABS models

1 day ago

Variohm Group buys Phoenix America

Based in Fort Wayne, Indiana ,Phoenix offers a range of absolute and incremental encoders, together with speed and proximity sensors, custom moulded magnets and more

1 day ago

New chain configurator aids machine builders

Tsubaki's recently unveiled configurator can make specifying chain a whole lot quicker and easier

1 day ago

Counterfeit bearings – NSK continues the fight against the fakes

The scale of the fake bearings problem has been highlighted with the discovery of around 23,000 counterfeit NSK packages and labels at a plant in Hebei Province, China

1 day ago

Parker launches new hydraulic fluid particle contamination monitor

The company’s icount LaserCM30 Particle Contamination Monitor is now available and can provide test results in 90 seconds

2 days ago

Last few places on Machinery Safety Course

Just a handful of places remain available on the last Pilz City & Guilds accredited Machinery Safety Course in 2020. Diary date is December 14th to 17th

2 days ago

Camozzi Automation launches new quick exhaust safety valves

Designed to provide a plug and play solution for OEMs that need to be compliant with Machinery Directive 2006/42/EC, Camozzi Automation says that its new quick exhaust 2-way safety valve range also complies with ISO 13849-1 covering the safe design of control systems which perform safety functions

2 days ago

SICK’s Open Service for IO-Link function blocks

A new open software service for control systems has been introduced by SICK

5 days ago

Automatic bearing lubrication brings ore inspiring results in mining

By installing automatic lubricators for bearings on its conveyor drive motors and belt pulleys, an opencast mine in Hungary has seen a range of benefits, including the prevention of unplanned downtime, longer bearing life and reduced repair work

5 days ago

Kinoulton company conveys COVID-combating masks

Here's a great example of the germ of an idea resulting in the combating of COVID