SMB introduces marine-grade 316 stainless steel bearings

The 316 bearing range can withstand temperatures of up to 500degC (if supplied without cages) and is highly resistant to seawater, salt spray and chemicals. The key difference between 316 stainless steel bearings and other stainless steel bearings is the addition of molybdenum to the metal - an alloy which drastically enhances the corrosion resistance of the bearing.

SMB's full range of bearings includes miniature and instrument bearings, plastic bearings, ceramic bearings, stainless steel bearings, thin section bearings and low noise electric motor bearings.

SMB Bearings supplies 316 stainless steel bearings with polyethylene, PEEK or PTFE cages - all of which provide excellent corrosion resistance to water, salt water and most chemicals. When used in either a PEEK or PTFE cage, the bearings can sustain temperatures of up to 260degC. What is more, bearings from this range can be used in cryogenic applications down to an impressive -250degC, depending on the cage material.

Bearings made with 316 stainless steel are well suited for marine applications that operate above the waterline, but can also be effective when the bearing is temporarily submerged, providing it is regularly washed down with clean water.

316 stainless steel relies on the presence of oxygen to regenerate the passive film on the surface of the steel and, as a result, 316 stainless steel is a less suitable option if the bearing is permanently submerged. For example, in a low-oxygen marine environment, when there is no flow of water, the bearing steel may be prone to pitting corrosion.

While the 316 range is suitable for use in harsh environments, bearings manufactured from this material semi-precision and are only suitable for relatively light loads. The more commonly used 440 grade bearings are better suited for high-load and high-precision applications; however, 440 grade bearings will suffer from corrosion in the harsh environments in which 316 grade stainless steel could survive.

In addition to its advantages for marine applications, SMB's 316 stainless steel bearings are also suitable for use in the food and beverage industry. In fact, SMB Bearings can provide a relubrication service to replace the standard lubricant supplied with 316 stainless steel bearings with a food grade lubricant.

Please follow the link for more information about SMB Bearings' 316 stainless steel bearing range.