For more than a decade the uEye SE camera has proved itself in numerous industrial and non-industrial applications. Now IDS has launched a newly developed generation of this successful industrial camera family. The camera is available as both a GigE and USB 3.1 Type-C connection - in each case screw-on - as a housing version or as a board stack version, and with a broad range of CMOS sensors with rolling or global shutter. In conjunction with a comprehensive range of accessories (lenses, cables, etc) this industrial camera is suitable for a huge number of applications.
The first 25 models in the series are versions with CMOS sensors from Sony (including Pregius IMX253, IMX304, IMX255 and IMX267 sensors with 8.9 and 12.3 mega pixel resolution), ON Semiconductor and e2v with rolling or global shutter.
The housing with a C-mount lens connection has a robust design and is equipped with a special dust-proof sensor seal. The cameras have a screw-on eight-pin Hirose connector for trigger and flash - both opto-isolated - and two GPIOs, which enable numerous additional application functions in an industrial setting. All camera models are also offered as an unhoused board stack version with C-mount front or with no lens holder. An integrated 128MB memory decouples image acquisition from transmission, making the uEye SE particularly useful for multi-camera applications.
These versatile cameras are available with a screw-on Gigabit Ethernet connection or with a screw-on USB 3.1 Type-C connector. The GigE models support single-cable operation with Power-over-Ethernet (PoE) up to a length of 100m. Alternatively, the camera can be powered using a 12-24V power supply. The GigE uEye SE is available with a choice of GigE Vision firmware or the IDS Software Suite.
In conjunction with the proprietary driver package from IDS, the USB 3.1 Gen 1 version of this camera family also allows USB Power Delivery (PD). This enables an LED light to be operated using the USB cable, with the camera requesting the necessary power for itself and the light from the host PC via the USB Type-C interface as a PD consumer.
The IDS Software Suite is identical for all IDS cameras, regardless of whether they have a USB 2.0, USB 3.0, USB 3.1 or GigE connection. This enables optimum use of the camera and sensor features.
Follow the link for more information about the latest uEye SE cameras from IDS.