180deg screw-on hinge without hinge pin reduces assembly time

Designed to provide the same performance as the existing Emka 1056 hinge but at reduced cost and enabling lift off door operation, a new screw-on hinge suits flush mounted doors and may be interchanged with the existing 1056 design with no need to modify drawings or production.

The screw-on hinge does not need the usual hinge pin by virtue of its design which incorporates the pin into the two separate leaves of the hinge in such a way that they can be inserted at the 270° position then become securely interlocked when the hinge is closed to 180°. This feature also enables simple door removal when required.

On the one hand, Emka says this results in significant cost advantages compared to conventional screw-on hinges with hinge pins. On the other hand, the design enables tool-free assembly within a few seconds. To do this, the two identical hinge halves are first inserted into each other in the 270° position. The fitter then brings the assembled hinge halves into the intended 180° position. Both halves are already firmly connected to each other, even without a hinge pin. In the 180° position, the hinge is then fixed to the intended application area with countersunk screws.

Depending on the customer’s requirements, the hinge may be supplied already pre-assembled or as individual hinge halves for self-assembly. The hinge with its design-protected hinge halves is available in three different sizes: 60 x 60 mm (M8), 50 x 50 mm (M6) and 40 x 40 mm (M5). Customers can also choose from four different materials and several surfaces: polyamide (glass-fibre reinforced plastic), zinc die-cast (black powder-coated or chrome-plated), aluminium (die-cast; black powder-coated or anthracite anodised) and stainless steel (investment casting; ground or industrially polished).

While polyamide, the lightest material available, impresses with its high elasticity, tensile strength, rigidity and hardness, zinc die-casting plays to its strengths with high strength and durability (fatigue resistance). The aluminium hinge, on the other hand, scores with its low weight and resistance to corrosion and weathering. The stainless steel version also offers high resistance to corrosion and weathering plus rugged high performance, which also enables it to be used even with thin enclosure walls.

EMKA (UK) Ltd

Patricia House
Bodmin Road
Coventry
CV2 5DG
UNITED KINGDOM

+44 (0)24 7661 6505

enquiries@emka.co.uk

www.emka.com/uk_en/company/

More products
4 hours ago
Phoenix Contact celebrates its 100th anniversary
Phoenix Contact is celebrating a century full of passion for technology and innovation. In the past 100 years, the family-run company Phoenix Contact has evolved from a commercial agency for industrial products into a global manufacturing company.
7 hours ago
Igus reveals its secret to keeping manufacturers stocked and ready
Buyers of common cables, who would typically assemble their own cable sub-assemblies, are now ordering Igus e-chains and ready-to-connect cables due to Igus’ ability to deliver quickly.
10 hours ago
Thorite enhances systems expertise with new appointments
Compressed air and fluid power specialist Thorite has made two new appointments to develop its specialist support in electric automation and systems building.
11 hours ago
Piab Group acquires IB Verfahrens- und Anlagentechnik and Coval
Piab Group has boosted its capabilities in vacuum conveying and in robotics with the acquisitions of Coval and IB Verfahrens- und Anlagentechnik.
1 day ago
Latest Norgren acquisition sees customers access enhanced electric motion soluti
Continuing a strategic commitment to offer the widest customer choice, Norgren’s extensive range of electric motion solutions has been further enhanced with the introduction of a new portfolio of linear and multi axis systems.
4 days ago
RS unveils Better World product range of sustainable products
RS Group, a global omni-channel provider of industrial product and service solutions, has announced the launch of its Better World product range.
4 days ago
Sumo processing system offers big benefits thanks to Yaskawa robot
A new robotic handling system based on the MOTOMAN GP7 robot from Yaskawa has proved to be very successful on an automatic grinding machine for a major German pump manufacturer which specialises in supplying customised pumps for automotive engineering applications.
1 week ago
Schaeffler destroys ten tonnes of counterfeit rolling bearings
Schaeffler takes regular and consistent action against counterfeit products, and now it has had around 30,000 counterfeits with a total weight of ten tonnes destroyed in Schweinfurt.
1 week ago
Klüber Lubrication awarded with gold medal for sustainability again in 2023
Klüber Lubrication was awarded the ‘gold medal’ by EcoVadis, a leading company for sustainability ratings, for the second time after 2022. This makes the lubricant manufacturer one of the best four percent of more than 100,000 companies rated worldwide.
1 week ago
Festo highlights the benefits of standardised hardware
Festo says its standardised hardware and the ability to work with the industry leading control architectures makes its stepper and servo drives, remote I/O and valve terminals a natural choice for machine manufacturers and end-users.

Login / Sign up