All-in-one system for condition and torque monitoring

The long-term development partnership of Schaeffler and Bonfiglioli, a market leader in yaw and pitch drives for wind turbines, has led to the creation of a compact Industry 4.0 package. Schaeffler has combined two of its proven measurement systems - SmartCheck and TorqueSense - to create a new condition and torque monitoring system.

While the vibration diagnosis system of the Schaeffler SmartCheck detects incipient damage at a very early stage, peak loads and their frequency can also be detected and limited using the precise torque signal. Using algorithms based on its application expertise, Bonfiglioli converts this data into information throughout the entire life of a wind turbine. Therefore, online reporting on relevant performance indicators can be provided, e.g. the general "health" status of the geared drives, possible critical conditions, and abnormal behaviour of the yaw systems. Overall, customers benefit from reduced unplanned downtimes as a result of overloading or unexpected operational conditions of the system and load-based (i.e. generally longer) maintenance intervals due to predictive monitoring.

The Schaeffler SmartCheck performs frequency-selective condition monitoring of bearings, gearboxes, electric motors, pumps, fans and machines based on solid-borne vibrations. Conspicuous frequencies can be automatically attributed to the damaged component using only one Schaeffler SmartCheck. A temperature sensor is also integrated into the device. The torque signal and speed signal of the Schaeffler TorqueSense are sent, pre-processed and supplied to the machine control system and/or maintenance department with the vibration signals that are also analysed via the SmartCheck. The addition of operating data on torque and speed to the SmartCheck condition monitoring system opens up several new scenarios. In the simplest case, the system allows the monitoring of torque peaks and their frequency and therefore an evaluation of the utilisation level and the derivation of load-based maintenance measures. The signals can also be integrated into the operating strategy for drives and initiate torque limitation or shutdown functions.

The new system is particularly suitable for adjustment and rotary drives in the wind power and shipbuilding industries, in large cranes, construction and mining machinery with turrets, and for winches. The torque signal can be used for both monitoring and smooth and precise torque control and regulation of the pull cable.

Pilot project for the wind power industry

Schaeffler is currently developing an initial pilot project for Bonfiglioli geared motors of yaw drives for wind turbines. In this application, the load data that is condensed using the Schaeffler SmartCheck is compared with pre-defined limit values and the results are transmitted wirelessly to Bonfiglioli via a gateway. The monitoring system for Bonfiglioli geared motors operates independently and is not connected to the turbine's control system, making it very easy to retrofit when the geared motors are replaced.

With the new system, Bonfiglioli aims to monitor overloading of the yaw drives, increase the lead times for maintenance, and enable load-based instead of time-dependent maintenance procedures to be defined. The TorqueSense module is positioned between the motor and gearbox to integrate it into the flow of force of the geared motor. The measurement system is also fully functional in lubricating oil and offers significant advantages for integration into the drive train, including:

  • high measurement accuracy (approximately 1 per cent of the measuring range) at an attractive price
  • non-contact measurement principle
  • no change in the load-carrying capacity and torsional rigidity due to the sensor shaft
  • temperature has minimal influence on the operating life and measurement accuracy
  • integrated speed measurement

Easy integration of torque sensor technology

Schaeffler TorqueSense comprises a magnetically conditioned section of shaft and a sensor housing. The housing does not have to completely surround the shaft. Designs that are mounted on one side only, or U-shaped designs, are possible depending on the required accuracy and interference immunity. As a non-contact measuring principle is used, the torque can also be measured from outside by using a non-magnetic housing. The sensor module can then be mounted from the outside. With Schaeffler TorqueSense, customer and application-specific shaft diameters up to approximately 100mm are possible; sensor units in different standard diameters already exist. The measuring range is from 100Nm to 20kNm. The sensors have high linearity and very small hysteresis due to the measuring principle used.

Learn more about SmartCheck and TorqueSense at

Schaeffler (UK) Ltd

Unit 308, Fort Dunlop
Fort Parkway
B24 9FD

+44 (0)121 313 5830

More products
4 hours ago
Nabtesco delivers solutions for every drive application
To continue meeting increasing demand, Nabtesco is substantially expanding its production capacities with the construction of a new factory in Hamamatsu, 250 km southwest of the its headquarters in Tokyo – which will double the annual production capacity to two million precision gearboxes by 2026.
21 hours ago
Festo showing ‘Progress in Motion’ at PPMA 2022
The Festo stand at PPMA 2022 will focus on key applications for the process and packaging sector. These include innovative process valve controls, servo-controlled flow wrapping and a new solution for controlling web tension with dancing rollers.
1 day ago
IFM Electronic makes IIoT easy at PPMA 2022
At this year’s PPMA Show, IFM Electronic is focusing on its moneo IIoT platform. This has been developed specifically to provide a convenient solution to the challenge of converting the huge amount of data produced by modern plant and machines into useful information that can be used to reduce downtime, optimise efficiency and cut costs.
1 day ago
Bürkert extends capabilities with Fine Controls partnership
The key distribution partner agreement between Bürkert and Fine Controls brings OEMs or end users in process control a distributor who can supply all the parts necessary to build a complete process system, as well as offering design and specification support.
5 days ago
Individual service for signal integrity
The demands on connection technology performance are constantly increasing. By providing customised support, Phoenix Contact helps customers select connection components to ensure the highest possible signal integrity.
5 days ago
Aveva MES rises in the leader ranks of the latest Gartner report
Aveva’s Manufacturing Execution Systems (MES) offering, which is deployed in the UK & Ireland by AVEVA Select partners SolutionsPT, has been recognised as a global leader in industrial software in the latest 2022 Gartner Magic Quadrant for Manufacturing Execution Systems.
5 days ago
Harwin and MSA Components sign German distribution deal
Harwin is bringing greater strength to its German supply chain through a new strategic partnership with MSA Components. The agreement allows MSA to offer all the latest products from Harwin’s extensive portfolio.
6 days ago
Siemens selected by Microsoft for RAMP Programme
Siemens Digital Industries Software has been selected to participate in the Rapid Assured Microelectronics Prototypes (RAMP) Phase II initiative.
6 days ago
Kontron receives VDC Research’s Gold Award for vendor satisfaction
Kontron has been recognised for outstanding customer satisfaction. The company has received the Gold Vendor Satisfaction Award for IoT and Embedded Hardware technology from VDC Research.
6 days ago
Mouser wins Vishay Distributor of the Year Award
Mouser Electronics has received the 2021 High Service Distributor of the Year award from Vishay Intertechnology, one of the world’s largest manufacturers of discrete semiconductors and passive electronic components.

Login / Sign up