An introduction to electrical enclosure specification

Whether you're an electrical installer, design engineer or an OEM, the chances are that you deal with electrical enclosures on a day-to-day basis. While on the face of it the humble enclosure may seem to be one of the simplest components to specify, in reality the variety of choice available on the market may mean that the most obvious option isn't always the best in terms of reliability and long-term profitability. Chris Lloyd, General Manager of Spelsberg ELS, explains the basic decisions which need to be made when specifying an enclosure and how the right choice can reduce installation time and cost, and improve reliability.

To many end-users an enclosure is simply a box in which to store electrical components or connections, and the specification process needs to take no more time than is required to decide on the right size. However, if you look at the range of options on the market it becomes apparent that there are many more variables to take into consideration. Spelsberg alone has over 4000 standard products and each one of them has been designed with a certain set of requirements in mind.

Enclosures are available in many different materials, shapes and sizes, and all of them are relevant to different sectors of the market. The suitability of each enclosure depends on the application that it will be used for. Some may need to provide protection from external knocks; some may need to provide suitable external mounting options; and some may need to offer quick installation to keep on-site labour costs low. By understanding how the different options affect performance the end-user can avoid making an unsuitable selection which could cost them in the future.

Enclosure material is the first, and probably most fundamental, choice to be made. The two basic choices are plastic vs. metal, but in reality the two groups can be broken down further: e.g. polycarbonate, ABS, polystyrene, glass reinforced polyester (GRP), aluminium, steel, and even cast iron.

For the majority of modern applications plastic construction is the favourable choice as it is typically lighter, less expensive and easier to include built-in internal mounting options for quick installation. However, metal enclosures are useful for applications which require protection from potentially heavy external knocks, such as building sites, mining and quarrying, though in these instances GRP may be considered superior as metal enclosures are prone to corrosion once dented.

Despite the wide selection of choice between different plastics there are typically a few easy to follow rules. Polystyrene and ABS enclosures offer a lower tensile strength and less UV protection, but the costs are low which make them suitable for applications which are inside and may require a lot of units at a lower cost. Polycarbonate offers increased tensile strength and is UV resistant, which makes it suited for harsh applications and outside installations.

Internal designs

Having chosen the correct material for your application it is also important to consider the internal designs of the enclosure and how they meet with your requirements. The most obvious consideration is the size. Both the external and internal dimensions should be considered, as some enclosures will make better use of the space inside for housing your component. Sourcing an enclosure with the correct dimensions can ultimately make installation easier and less time consuming while also ensuring that the external aesthetics are optimised.

Due to the variety of components which may be housed within an enclosure, most good manufacturers offer many different internal mounting options to further simplify installation. When you are specifying an enclosure you should consider what will be housed within it and ask what mounting options are available. Typical examples are PCB or terminal mountings, DIN Rails or separate compartments for housing batteries.

Some applications are even more specialised, and many of the enclosures that Spelsberg and other manufacturers produce reflect this in their designs. The most obvious example is the AK range of distribution enclosures which are designed to house components such as Miniature Circuit Breakers (MCBs) on a DIN rail with a transparent window which can be easily opened for access to the components.

Other examples of application specific enclosures from Spelsberg include the IBT and IBTronic junction box range for pre-cast concrete construction; WKe range of fire-resistant enclosures with up to E90 protection; and PV enclosures for photovoltaic installations.

Of course with over 4000 possible selections it is impossible to cover all of the possibilities here. Equally, it is unrealistic to expect end-users to keep up-to-date on all the product developments within our industry. This is why most good enclosure suppliers, such as Spelsberg, employ sales engineers who have experience in the industry and are able to offer specification guidance based on your design. However, by understanding the basic requirements of your application you can ensure that the enclosure you choose offers all the protection and performance that will be required.

To learn more about electrical enclosures, please visit the Spelsberg website at www.spelsberg.co.uk.

Spelsberg Els UK Ltd

Unit 1B Queensway Business Park
Hadley Park West
TELFORD
TF1 6AL
UNITED KINGDOM

+44 (0)1952 605849

sales@spelsberg.co.uk

www.spelsberg.co.uk

More from Spelsberg Els UK Ltd

Just an enclosure?

Posted 1 week ago

On the charge!

Posted 1 month ago

Switching into LV switchgear enclosure mode

Posted 1 month ago

Fast prototypes for industrial enclosures

Posted 1 month ago

The path to faster development of industrial enclosures

Posted 2 months ago

New configurator has it figured out

Posted 3 months ago

Protection reaches a critical junction

Posted 4 months ago

EVs – a highly charged topic

Posted 5 months ago

Industrial enclosures – more than just the box

Posted 5 months ago

Developments in charging technology

Posted 7 months ago

Mini size junction boxes now available

Posted 7 months ago

New fire-resistant enclosure maintains electrical system safety

Posted 9 months ago

Enclosure customisation is key for fire safety control unit

Posted 10 months ago

Enclosures for outdoor electrical installations

Posted 1 year ago

Hand sanitiser dispenser manufacturer demands rugged enclosures

Posted 1 year ago

Customised enclosures for extreme and challenging environments

Posted 1 year ago

Spelsberg UK working hard to maintain UK stocks

Posted 1 year ago

Take a virtual tour of Spelsberg's electrical enclosures

Posted 1 year ago

Spelsberg GRP enclosure installed in UK's deepest mine

Posted 1 year ago

Movie of the month

Posted 1 year ago

Quick delivery on printing and labelling of enclosures

Posted 1 year ago

How to specify enclosures for environmental management systems

Posted 1 year ago

Spelsberg helps UK machine builders to beat Brexit uncertainty

Posted 1 year ago

Fast turnaround on customised enclosures

Posted 1 year ago

GEOS enclosures are suitably rugged for coastal applications

Posted 2 years ago

Extensive stocks of Spelsberg enclosures held in the UK

Posted 2 years ago

Overnight customised enclosures thanks to in-house machining

Posted 2 years ago

Video shows the extreme tests endured by Spelsberg enclosures

Posted 2 years ago

Praise for Spelsberg UK's Pro-Active technical telesales service

Posted 2 years ago

Spelsberg customised enclosures feature in educational rig

Posted 2 years ago

Movie of the month

Posted 2 years ago

Spelsberg enclosures speed fast-food kitchen fit-outs

Posted 2 years ago

GEOS enclosures provide protection in aggressive environments

Posted 2 years ago

Enclosures ensures lift passengers can make emergency calls

Posted 3 years ago

Drives and Controls celebrate 18 years of Spelsberg distribution

Posted 3 years ago

Spelsberg and CED offer top-class junction boxes to wholesalers

Posted 3 years ago

Spelsberg UK turns 20: learning from the past, moving forward

Posted 3 years ago

Combating condensation in enclosure installations

Posted 3 years ago

Spelsberg aids efficiency in offsite heat exchange builds

Posted 3 years ago

Where to position electrical enclosures

Posted 3 years ago

John Clarke is new Spelsberg Area Sales Manager for West region

Posted 3 years ago

Free expert advice from enclosureanswers.com

Posted 3 years ago

Distribution board helps keep divers' pressure stable

Posted 4 years ago

Next-day custom enclosure samples keep projects on schedule

Posted 4 years ago

Spelsberg custom enclosures in dairy farming applications

Posted 4 years ago

Tough enclosures bring safety and endurance to road tankers

Posted 4 years ago

Spelsberg shows its true colours for superior customer service

Posted 4 years ago

Spelsberg appoints Chris Smith as South West Area Sales Manager

Posted 4 years ago

Ultraviolet considerations when specifying an enclosure

Posted 4 years ago

Spelsberg fit and forget thermostat keeps frost and snow at bay

Posted 4 years ago

Bespoke cabling systems company grows with Spelsberg enclosures

Posted 4 years ago

Spelsberg aluminium enclosures expected to prove a hit

Posted 4 years ago

Spelsberg offers farmers world-class electrical enclosures

Posted 4 years ago

WAGO uses Spelsberg enclosures for new pre-mounted products

Posted 4 years ago

Spelsberg laboratory approved for in-house UL certification

Posted 4 years ago

Spelsberg offers upgrade to classic Abox design

Posted 4 years ago

Enclosures speed rewiring of automated manufacturing systems

Posted 5 years ago

GRP: the best of both worlds for trackside enclosures?

Posted 5 years ago

Commercial salad growers box clever with Spelsberg

Posted 5 years ago

Modular distribution enclosures improve "˜Smart Building'

Posted 5 years ago

Managing heat in electrical enclosures

Posted 5 years ago

Spelsberg slashes lead times on custom orders

Posted 5 years ago

Customised standard enclosures are quick and cost-effective

Posted 5 years ago

Spelsberg UK plans for growth in 2016 to support market demands

Posted 5 years ago

Spelsberg Pro-Active simplifies ordering for reduced lead times

Posted 5 years ago

Stealth enclosures for covert operations

Posted 5 years ago

Quickly find the right enclosure with new Spelsberg UK website

Posted 5 years ago

High-quality GRP heavy duty enclosures from Spelsberg

Posted 5 years ago

Spelsberg launches steel enclosure range

Posted 6 years ago

Ready-made enclosures for water treatment industry

Posted 6 years ago

1000+ bespoke enclosures moulded and assembled in 4 weeks

Posted 6 years ago

A-Z of electrical enclosures

Posted 6 years ago

Integrated ventilation with Spelsberg's AK Air enclosures

Posted 6 years ago

Trace heating thermostats keep water treatment plants running

Posted 6 years ago

Innovative electrical enclosures for new aircraft carriers

Posted 6 years ago

How to select the best material for an electrical enclosure

Posted 6 years ago

The questions to ask when specifying an electrical enclosure

Posted 6 years ago

Spelsberg expands current TK enclosure range

Posted 6 years ago

Metal vs. plastic: specification of large outdoor enclosures

Posted 7 years ago

Rapid-Box: bespoke fire-resistant junction box

Posted 7 years ago

Specialised coatings improve enclosure performance

Posted 7 years ago

Spelsberg claims largest selection of non-metallic enclosures

Posted 7 years ago

Spelsberg WKE enclosures used for emergency systems

Posted 7 years ago

Bespoke moulding service speeds up repeat orders from Spelsberg

Posted 7 years ago

Customised enclosures help prevent freezing pipes

Posted 7 years ago

Service over supply from Spelsberg

Posted 7 years ago

Spelsberg appoints David Mills as Area Sales Manager for NW

Posted 7 years ago

Chris Lloyd confirmed as Spelsberg UK MD

Posted 7 years ago

Abox Magic GT gel provides IP68 ratings to 15 metres

Posted 7 years ago

How to select correct IP ratings for electrical enclosures

Posted 7 years ago

Customised enclosures reduce costs and improve quality

Posted 7 years ago

Flexibility and reliability for airflow control unit enclosures

Posted 8 years ago

Spelsberg reduces lead times with new UK headquarters

Posted 8 years ago

Composite junction boxes for aircraft carrier lighting systems

Posted 8 years ago

Composite junction boxes used on RN aircraft carriers

Posted 8 years ago

Understanding ingress protection in electrical enclosures

Posted 8 years ago

Spelsberg will improve lead times on customised products

Posted 8 years ago

Non-metallic enclosures: the future for trackside installation

Posted 8 years ago

Revamped GTi range speeds up switchgear installation

Posted 8 years ago

Spelsberg UK sales team is strengthened with new appointments

Posted 8 years ago

Spelsberg launches its 'Space for you' campaign

Posted 8 years ago

New B-Box from Spelsberg offers quick, waterproof installation

Posted 9 years ago

Which is the best material for your application's enclosure?

Posted 9 years ago

Waterproof gel-filled enclosures are reusable

Posted 13 years ago

Non-metallic enclosures cope with harsh outdoor environments

Posted 13 years ago

Rugged Norma PC and ABS enclosures are sealed to IP65

Posted 13 years ago

IP66 enclosures selected for water shut-off valve controls

Posted 13 years ago

Custom junction box moulded in high-grade black plastic

Posted 14 years ago

Spelsberg products available through Farnell

Posted 14 years ago

Modular enclosures maintain IP65 protection

Posted 14 years ago

Rugged enclosures are suitable for fire engine applications

Posted 14 years ago

TK enclosures are tough enough for classrooms

Posted 14 years ago

More technical articles