Award-winning SURTES Formula Student team uses igus cables

A team of undergraduates at Surrey University are pioneering Formula Student in the UK with an all-electric powertrain. Formula Student is the world's largest student motorsport competition, which brings together teams from universities across the world. Team SURTES (Surrey University Racing Technology Engineering Solutions) operates out of the Engineering Design Centre in Guildford. Four years ago, the team started implementing its first ever electric powertrain.

The team's first aim was to develop a cost-effective, modular electronics design centred around multiple CAN-FD buses and a "˜universal electronics node'. Knowing that CAN-FD is not yet widely used in Europe or within Formula Student this made the project all the more challenging. The high data rates of CAN-FD (up to 8MHz) mean that signal integrity is critical - selecting the right cable was therefore key.

Already receiving engineer support and engineering-grade plastic bearings for its pedal box through igus' YES (Young Engineers Support) programme, Team SURTES was familiar with the company. It was convinced igus chainflex bus cables would provide the necessary shielding. As the company offers numerous chainflex cables with multiple cores of differing thicknesses, technical support for correct selection was vital.

To explain, the Class 1 car is a fully constructed and running vehicle. The Class 2 vehicle, on the other hand, is not yet a complete running car used to give less experienced team members an opportunity to develop. In the 2017-2018 season, the Class 2 car used a modular wiring loom with a CAN 2.0 node from the voltage inverter to the ECU (Electronic Control Unit). It was a hybrid system with some sensors going through the CAN 2.0 networks and some wired directly. Using an iterative design approach, the 2018-2019 Class 1 car has all the sensors going through CAN FD node apart from the accumulator. The CAN FD can tolerate 8Mbps and for the inertial measurement unit and GPS only needed 2-3Mbps, giving plenty of headroom.

Regenerative braking

To improve vehicle performance in the endurance event the team developed regenerative braking functions. Formula Student rules stipulate that the maximum power drawn from the accumulator must not exceed 80kW. Regenerating energy is allowed and unrestricted but only when the vehicle speed is above 5km/h. The Tractive System (TS) Accumulator is defined as all the battery cells or supercapacitors that store the electrical energy to be used.

The team started developing the regenerative braking system a year in advance but did not implement the technology into the car. The motor drives the rear wheels, when the braking pedal is pressed the energy gain from the braking force helps drive the hydraulics brakes. Rotation energy back powers the motor and the current is taken away to the accumulator. In 2018, the system was are up and running with the aim to recover between 10-20 per cent of the energy, which back powers the battery through the ECU. Team SURTES used igus chainflex HV and CAN communication cables for its Class 1 and Class 2 cars. After completing the build of the 2018 vehicle in January, the team had 6 months of testing prior to the competition.

Liam D'souza, Manufacturing and Assembly manager for Team SURTES, says, for the 2017/18 season: "This is the first time since our switch to EV powertrains that we have completed the endurance event, a proud moment for the team." The highlight for the team's Class 2 members, however, was winning the Santander Award for the most improved Class 2 car. This entailed a £5000 cheque towards the team's next car, presented by Formula 1 legend Jenson Button. The team was fourth overall in the Design event and sixth in the Manufacturing and Cost event.

For the 2018/19 season, the aforementioned Class 2 car was completed and participated in the 2019 FSUK event. This was the team's most successful year in its 13-year history with achievements such as Top British EV, Best Implemented High-Voltage Powertrain awarded by Mercedes-AMG HPP, and the Most Efficient car at the 2019 event.

D'souza says: "These achievements by our team would not have been possible but for the generous support of igus over the past few seasons. This is not something taken lightly by our Team SURTES members and is very much appreciated! We look forward to another successful year of progression within the team and are glad to hear that igus is willing to sponsor us next season."

For more information about igus chainflex cables go to and for more about the YES (Young Engineers Support) programme go to

igus (UK) Ltd

51A Caswell Road

+44 (0)1604 677240

More applications
15 hours ago
RS Components partners with HMS Networks
RS Components has partnered with HMS Networks, a leader in industrial information and communication technology, to significantly expand its industrial equipment networking solutions offering.
20 hours ago
Mouser Electronics receives TDK’s top distribution awards
Mouser Electronics has received three top distribution awards from TDK. Mouser was honoured with TDK’s Global Best Performance Award for Fiscal Year 2022, North America Distributor of the Year for Calendar Year 2021, and European Distribution Award in High-Service Distribution for 2021.
1 day ago
White Paper addresses assembly challenges
Resolve assembly challenges instantly with Henkel’s new high performance LOCTITE 402, an innovative instant adhesive that also improves workplace safety. Download the all-new white paper here.
1 day ago
Schaeffler organises worldwide Climate Action Day
June has seen Climate Action Day at all Schaeffler locations worldwide, with every one of the approximate 83,000 Schaeffler Group employees stopping work for 90 minutes to focus on climate issues.
1 day ago
Yokogawa helps Solar Team Twente to solar challenge win
Yokogawa’s WT5000 precision power analyser has been used by Solar Team Twente to win the first ever Solar Challenge Morocco. The WT5000 helped the team to squeeze every last watt out of its car’s solar power system, ensuring it crossed the finish line of the 2,500 km course in first place.
1 day ago
HVACR OEM relies on Emka locking technology
When HVACR OEM Hansa Klimasysteme needed new connecting elements for the corners of its air-conditioning units to stabilise the housing cube, suitable for die-casting, it turned to Emka.
2 days ago
LEM holds inauguration ceremony for new production plant
Electrical measurement specialist LEM has held an inauguration ceremony in Penang, Malaysia for its new production plant. The ceremony marked a major step in the plant’s construction with the first electric current sensor products expected to come on-line in Q1 2024.
2 days ago
ITI acquires digital manufacturing specialist Cimlogic
ITI, one of the UK’s largest independent systems integrators, has acquired Cimlogic, a leading digital manufacturing solutions and services provider to some of the world’s largest manufacturers.
3 days ago
Atlas Copco saves precision sheet metal manufacturer over £6,000 a month
When Constant Group, a Manchester-based supplier of sheet metal parts, components, and fully assembled fabrications pieces were let down by their previous service provider for onsite high-pressure nitrogen generation, they turned to Atlas Copco for help.
3 days ago
Timber plant reduces downtime with NSK linear guides
Thanks to the adoption of NSK’s linear guides with K1 lubrication units, a timber manufacturer managed to reduce conveyor downtime by a factor of more than 12, prompting annual cost savings of more than €77,000.

Login / Sign up