Machine Building

Products

New hand tool sets benchmark for installing stainless steel ties

Panduit Europe is introducing a new ergonomic, manually operated, stainless steel cable tie hand tool with improved performance metrics and ergonomic features for application of standard, light-heavy and heavy cross-section Pan-Steel type MLT ties, type MLTC/MLTFC coated ties and type MLTDH double wrapped ties. Thanks to a new ergonomic design the GS4MT-E device benefits from a 27 per cent lower handle force than comparable tools. An improved cable tie cut-off mechanism minimises the handle shock to the installer's hand by more than 50 per cent in the heavy setting and by more than 30 per cent in the standard setting compared with the competition. This makes the tool much more comfortable and easier to handle and reduces the risk of repetitive motion injuries for installers.

23rd August 2018

Compact escalator drives offer easy interchangeability

Renold Gears is launching a new range of compact escalator drives with three footprint options to provide easy interchangeability with those of other manufacturers. The case design ensures ease of installation for both the replacement of existing drives or in new applications without the need for re-engineering or redesign. The new escalator drives have a compact design available as motor ready or fitted with a vertical motor, brake and flywheel package for in-truss installation.

23rd August 2018

Mouser now stocking SanDisk iNAND 8251 embedded flash drives

Mouser Electronics is now stocking iNAND 8521 embedded flash drives (EFDs) from SanDisk. Built with 3D NAND technology and the fast UFS 2.1 interface, iNAND 8521 EFDs offer excellent read and write performance, delivering a storage option for the most data-intensive mobile devices, as well as thin-and-light compute devices.

22nd August 2018

Improved cage and insulation prolong bearing life

Schaeffler has developed two new products for cylindrical rolling bearings that offer distinct advantages for the rail sector. The new MPAX brass cage for cylindrical rolling bearings is a robust, rib-guided, single-piece solid brass cage, which is very resistant to vibration and shock loads. The MPAX cage has a higher load carrying capacity for radial centrifugal forces (higher radial rigidity) than its predecessors and is also suitable for very high speed applications. In terms of the rail sector, cylindrical rolling bearings with MPAX cages are particularly well suited to final drive gearboxes. Over time, Schaeffler expects the MPAX brass cage to gradually replace the previous cage types.

22nd August 2018

Powered devices for high-wattage IoT applications at Mouser

Mouser Electronics is now stocking the Si3406x Power Over Ethernet Plus (POE+) Powered Device (PD) family from Silicon Labs. Integrating all necessary high-voltage discrete components on a single PD chip, the Si3406x family devices reduce time to market and system cost for a variety of high-efficiency, high-power POE+ PD applications. The ICs deliver 30W of power to support feature-rich Internet of Things (IoT) products like Voice over IP (VoIP) devices, motor-positioned IP and security cameras, and other industrial devices.

22nd August 2018

Low-profile high-efficiency 550W ultra-high-density power supply

Low-profile high efficiency 550W ultra-high-density power supply

22nd August 2018

New PXIe USB 2.0 hub module simplifies test systems

Pickering Interfaces is adding a PXIe version of its USB 2.0 Hub module which offers the same capabilities as its popular PXI USB 2.0 Hub (model 40-738). This USB 2.0 Hub (model 42-738) is a single-slot 3U PXIe module that combines an 8-port USB 2.0 hub and USB data/power switching to provide a controlled connection between the backplane and USB products. Each port can connect and disconnect power and data paths separately, simulating various connection faults.

21st August 2018

New sliding slam latches are virtually silent in use

The new DIRAK sliding slam latch from FDB Panel Fittings provides a low-noise secure door-closure mechanism for internal doors, cupboards, etc. It is expected to be of value in specialist vehicles such as caravans, commercial vehicles, railway rolling stock and similar. Gary Miles, MD at FDB Panel Fittings explains: "In the event of the transportation of containers, for example for small animals or similar, in addition to vibration resistance and secure locking of doors and hatches, a stable closure is essential. For this reason DIRAK have developed their new sliding slam latch, which due to its sliding release prevents unintentional opening from the inside and furthermore is virtually noiseless during use."

21st August 2018

Mouser adds Intel RealSense D400 series depth-sensing cameras

Mouser Electronics is now stocking the Intel RealSense D400 product family. Built specifically to help embedded systems sense, understand, interact and learn from real-world environments, the Intel RealSense D400 product family offers designers a comprehensive platform of ready-to-use cameras, depth modules and vision processors that deliver embedded depth-sensing technology, real-time processing, and high-speed 3D imaging that is versatile and robust for a variety of indoor and outdoor applications.

20th August 2018

Tin-free silicone avoids conflicting chemistries

Wacker Elastosil N9111 from Intertronics is a tin-free single-part RTV silicone adhesive sealant, with a neutral cure chemistry, producing a non-corrosive seal that does not inhibit other materials such as platinum cure silicones. This, along with its UL94 V-0 rating, makes it a strong candidate for electronics manufacturing, especially for gap filling, component ruggedisation, and form-in-place gasketing. It is stocked in depth at Intertronics for next-day delivery.

20th August 2018