The Aircraft Carrier Alliance, a partnering relationship between BAE Systems, Thales UK, Babcock and the UK Ministry of Defence, is currently undergoing the process of building two of the world's largest aircraft carriers for the Royal Navy; the first of which, the HMS Queen Elizabeth, is due to enter service in 2020. Rather than using traditional metal junction boxes, which are prone to corrosion damage and denting, the ship builder has opted to specify Spelsberg's tough, polycarbonate Abox range.
Aircraft carriers are a vital component of modern naval strategy. The massive vessels act as mobile landing strips for aircraft, allowing them to access parts of the world that they would not usually have the range to reach. The current project to build two new aircraft carriers is one of the most significant naval investments made by the Ministry of Defence since the turn of the century. The HMS Queen Elizabeth, which will be the first of the QE class carriers to be finished, is currently in its second stage of production.
The two carriers, which will be the largest surface warships ever to enter service with the Royal Navy, will each require 40,000 tonnes of steel and will be 65,000 tonnes at full displacement. Their power stations will generate 110MW and over 1.5 million metres of cable will be used across each carrier. Once at sea the ship's engineers will have extremely limited access to spare parts, so it is important that all the components specified are capable of surviving in the harsh maritime environment and performing their roles reliably.
In order to provide adequate protection to electrical connections, the junction boxes which are used on such a project need to be very tough. Being a maritime application it is important that the junction boxes provide suitable ingress protection while also offering corrosion resistance from the abrasive salt particles present in the water and the air. It is likely that the components will also be subjected to constant vibration which can often result in screws coming loose, meaning that the lids must be secured using an alternative method.
Chris Lloyd, General Manager for Spelsberg UK, comments: "Because this is a military spec project it might be expected that only metal junction boxes would be considered for the application. However, when we first spoke to the ship builders it quickly became clear that a tough, polycarbonate solution would actually be more suitable. Not only are metal enclosures more likely to corrode in the salty environment, they are also prone to denting during collisions; and with heavy military equipment passing through narrow corridors collisions are almost guaranteed."
Another consideration, and one that may seem strange considering the application, is weight saving. While it might seem odd to worry about the weight of a junction box on a 65,000 tonne aircraft carrier, the ship builders are very much aware that combined weight savings over all the onboard components across the entire span of the ship can result in very real performance improvements. Reduced weight will also result in lower delivery costs and improved installation times, which contributes to meeting the delivery schedule and budget of the project.
Having opted to use plastic enclosures for the aircraft carrier project the shipbuilders approached Spelsberg UK to recommend products for the job. Spelsberg is a UK supplier of non-metallic enclosures ex stock and offers complete customisation and assembly on nearly all of its products. It was able to recommend its polycarbonate, IP65 Abox enclosure for the project. By supplying the enclosures assembled (including terminals) Spelsberg was able to help the ship builder reduce on-site installation time.
Spelsberg's Abox range is made from halogen-free materials and is available with a range of specifications in terms of size, IP rating, gland type and terminal type. From the Abox 025, measuring just 80mm × 80mm right up to the Abox 2400 with dimensions of 640mm × 320mm, there is a product to suit most applications. A red cover can also be specified to identify circuits for safety lighting.
Industrial quality (IQ) versions of these junction boxes have an IK08 rating for protection against mechanical stress and the range is available with a variety of accessories which allow termination of cables with cross sections from 1.5mm2 up to 240mm2. The SL series of Abox, equipped with the screwless terminals, are approved for use on ships and in offshore applications by Lloyds Register. This approval was crucial in the specifications offered to the client.
The range is built with at least eight potential cable entry points and has a number of accessories which can be specified, including various terminals, cable clamps, glands, mounting rails and plates as well as sealing kits. For applications where the enclosure may be fully submerged a cast resin sealing kit is available which provides IP68 protection up to 15m.
Chris Lloyd adds: "It's fantastic to be involved on such a large project and we are very proud that our products have met all of the Ministry of Defence standards required for lighting circuits below decks. Over the years we have put a lot of effort into R&D and expanding our product range to ensure we can offer a suitable solution for almost any application. Our key strength is our ability to work with the customer to develop a solution rather than simply supplying a product."
For more information about the IP65 Abox enclosure range from Spelsberg UK, please go to www.spelsberg.co.uk.