Composite junction boxes used on RN aircraft carriers

BVT Surface Fleet Solutions is currently undergoing the process of building two of the world's largest aircraft carriers for the Royal Navy; the HMS Queen Elizabeth, due to be completed in 2016, and the HMS Prince of Wales, due to be completed in 2018. Rather than using traditional metal junction boxes, which are prone to corrosion damage and denting, the ship builder has opted to specify Spelsberg's tough, polycarbonate Abox range.

Aircraft carriers are a vital component of modern naval strategy. The massive vessels act as mobile landing strips for aircraft, allowing them to access parts of the world that they would not usually have the range to reach. The current project to build two new aircraft carriers is one of the most significant naval investments made by the Ministry of Defence since the turn of the century. The HMS Queen Elizabeth, which will be the first of the QE class carriers to be finished, is currently in its second stage of production.

The two carriers will each require 40,000 tonnes of steel and will weigh approximately 65,000 tonnes. Their power stations will generate 110MW, and over 1.5 million metres of cable will be used across each carrier. Once at sea the ship's engineers will have extremely limited access to spare parts, so it is important that all the components specified are capable of surviving in the harsh maritime environment and performing their roles reliably.

In order to provide adequate protection to electrical connections, the junction boxes which are used on such a project need to be very tough. Being a maritime application it is important that the junction boxes provide suitable ingress protection while also offering corrosion resistance from the abrasive salt particles present in the water and the air. It is likely that the components will also be subjected to constant vibration which can often result in screws coming loose, meaning that the lids must be secured using an alternative method.

Chris Lloyd, General Manager for Spelsberg UK, comments: "Because this is a military spec project it might be expected that only metal junction boxes would be considered for the application. However, when we first spoke to the ship builders it quickly became clear that a tough, polycarbonate solution would actually be more suitable. Not only are metal enclosures more likely to corrode in the salty environment, they are also prone to denting during collisions; and with heavy military equipment passing through narrow corridors collisions are almost guaranteed."

Performance improvements

Another consideration, and one that may seem strange considering the application, is weight saving. While it might seem odd to worry about the weight of a junction box on a 65,000 tonne aircraft carrier, the ship builders are very much aware that combined weight savings over all the onboard components across the entire span of the ship can result in very real performance improvements. Reduced weight will also result in lower delivery costs and improved installation times, which contributes to meeting the delivery schedule and budget of the project.

Having opted to use plastic enclosures for the aircraft carrier project, the shipbuilders approached Spelsberg UK to recommend products for the job. Spelsberg UK is the largest supplier of non-metallic enclosures ex stock in the UK and offers complete customisation and assembly on nearly all of its products. It was able to recommend its polycarbonate, IP65 Abox enclosure for the project. By supplying the enclosures assembled (including terminals) Spelsberg was able to help the ship builder reduce on-site installation time.

The Abox range is made from halogen-free materials and is available with a range of specifications in terms of size, IP rating, gland type and terminal type. From the Abox 025, measuring just 80mm × 80mm right up to the Abox 2400 with dimensions of 640mm × 320mm, there is a product to suit most applications. A red cover can also be specified to identify circuits for safety lighting.

The industrial quality (IQ) versions of these junction boxes have an IK08 rating for protection against mechanical stress, and the range is available with a variety of accessories which allow termination of cables with cross sections from 1.5mm2 up to 240mm2. The SL series of Abox, equipped with the screwless terminals, are approved for use on ships and in offshore applications by Lloyds Register. This approval was crucial in the specifications offered to the client.

The range is built with at least eight potential cable entry points and has a number of accessories which can specified, including various terminals, cable clamps, glands, mounting rails and plates as well as sealing kits. For applications where the enclosure may be fully submerged a cast resin sealing kit is available which provides IP68 protection up to 15m.

Chris Lloyd adds: "It's fantastic to be involved on such a large project, and we are very proud that our products have met all of the Ministry of Defence standards required for lighting circuits below decks. Over the years we have put a lot of effort into R&D and expanding our product range to ensure we can offer a suitable solution for almost any application. Our key strength is our ability to work with the customer to develop a solution rather than simply supplying a product."

To find out more about the Abox range of composite junction boxes please visit www.spelsberg.co.uk.

Spelsberg Els UK Ltd

Unit 1B Queensway Business Park
Hadley Park West
TELFORD
TF1 6AL
UNITED KINGDOM

+44 (0)1952 605849

sales@spelsberg.co.uk

www.spelsberg.co.uk

More from Spelsberg Els UK Ltd

On the charge!

Posted 1 week ago

Switching into LV switchgear enclosure mode

Posted 2 weeks ago

Fast prototypes for industrial enclosures

Posted 3 weeks ago

The path to faster development of industrial enclosures

Posted 1 month ago

New configurator has it figured out

Posted 2 months ago

Protection reaches a critical junction

Posted 3 months ago

EVs – a highly charged topic

Posted 4 months ago

Industrial enclosures – more than just the box

Posted 4 months ago

Developments in charging technology

Posted 6 months ago

Mini size junction boxes now available

Posted 6 months ago

New fire-resistant enclosure maintains electrical system safety

Posted 8 months ago

Enclosure customisation is key for fire safety control unit

Posted 8 months ago

Enclosures for outdoor electrical installations

Posted 11 months ago

Hand sanitiser dispenser manufacturer demands rugged enclosures

Posted 1 year ago

Customised enclosures for extreme and challenging environments

Posted 1 year ago

Spelsberg UK working hard to maintain UK stocks

Posted 1 year ago

Take a virtual tour of Spelsberg's electrical enclosures

Posted 1 year ago

Spelsberg GRP enclosure installed in UK's deepest mine

Posted 1 year ago

Movie of the month

Posted 1 year ago

Quick delivery on printing and labelling of enclosures

Posted 1 year ago

How to specify enclosures for environmental management systems

Posted 1 year ago

Spelsberg helps UK machine builders to beat Brexit uncertainty

Posted 1 year ago

Fast turnaround on customised enclosures

Posted 1 year ago

GEOS enclosures are suitably rugged for coastal applications

Posted 1 year ago

Extensive stocks of Spelsberg enclosures held in the UK

Posted 2 years ago

Overnight customised enclosures thanks to in-house machining

Posted 2 years ago

Video shows the extreme tests endured by Spelsberg enclosures

Posted 2 years ago

Praise for Spelsberg UK's Pro-Active technical telesales service

Posted 2 years ago

Spelsberg customised enclosures feature in educational rig

Posted 2 years ago

Movie of the month

Posted 2 years ago

Spelsberg enclosures speed fast-food kitchen fit-outs

Posted 2 years ago

GEOS enclosures provide protection in aggressive environments

Posted 2 years ago

Enclosures ensures lift passengers can make emergency calls

Posted 2 years ago

Drives and Controls celebrate 18 years of Spelsberg distribution

Posted 3 years ago

Spelsberg and CED offer top-class junction boxes to wholesalers

Posted 3 years ago

Spelsberg UK turns 20: learning from the past, moving forward

Posted 3 years ago

Combating condensation in enclosure installations

Posted 3 years ago

Spelsberg aids efficiency in offsite heat exchange builds

Posted 3 years ago

Where to position electrical enclosures

Posted 3 years ago

John Clarke is new Spelsberg Area Sales Manager for West region

Posted 3 years ago

Free expert advice from enclosureanswers.com

Posted 3 years ago

Distribution board helps keep divers' pressure stable

Posted 3 years ago

Next-day custom enclosure samples keep projects on schedule

Posted 4 years ago

Spelsberg custom enclosures in dairy farming applications

Posted 4 years ago

Tough enclosures bring safety and endurance to road tankers

Posted 4 years ago

Spelsberg shows its true colours for superior customer service

Posted 4 years ago

Spelsberg appoints Chris Smith as South West Area Sales Manager

Posted 4 years ago

Ultraviolet considerations when specifying an enclosure

Posted 4 years ago

Spelsberg fit and forget thermostat keeps frost and snow at bay

Posted 4 years ago

Bespoke cabling systems company grows with Spelsberg enclosures

Posted 4 years ago

Spelsberg aluminium enclosures expected to prove a hit

Posted 4 years ago

Spelsberg offers farmers world-class electrical enclosures

Posted 4 years ago

WAGO uses Spelsberg enclosures for new pre-mounted products

Posted 4 years ago

Spelsberg laboratory approved for in-house UL certification

Posted 4 years ago

Spelsberg offers upgrade to classic Abox design

Posted 4 years ago

Enclosures speed rewiring of automated manufacturing systems

Posted 4 years ago

GRP: the best of both worlds for trackside enclosures?

Posted 5 years ago

Commercial salad growers box clever with Spelsberg

Posted 5 years ago

Modular distribution enclosures improve "˜Smart Building'

Posted 5 years ago

Managing heat in electrical enclosures

Posted 5 years ago

Spelsberg slashes lead times on custom orders

Posted 5 years ago

Customised standard enclosures are quick and cost-effective

Posted 5 years ago

Spelsberg UK plans for growth in 2016 to support market demands

Posted 5 years ago

Spelsberg Pro-Active simplifies ordering for reduced lead times

Posted 5 years ago

Stealth enclosures for covert operations

Posted 5 years ago

Quickly find the right enclosure with new Spelsberg UK website

Posted 5 years ago

High-quality GRP heavy duty enclosures from Spelsberg

Posted 5 years ago

Spelsberg launches steel enclosure range

Posted 5 years ago

Ready-made enclosures for water treatment industry

Posted 5 years ago

1000+ bespoke enclosures moulded and assembled in 4 weeks

Posted 5 years ago

A-Z of electrical enclosures

Posted 6 years ago

Integrated ventilation with Spelsberg's AK Air enclosures

Posted 6 years ago

Trace heating thermostats keep water treatment plants running

Posted 6 years ago

Innovative electrical enclosures for new aircraft carriers

Posted 6 years ago

How to select the best material for an electrical enclosure

Posted 6 years ago

The questions to ask when specifying an electrical enclosure

Posted 6 years ago

Spelsberg expands current TK enclosure range

Posted 6 years ago

Metal vs. plastic: specification of large outdoor enclosures

Posted 6 years ago

Rapid-Box: bespoke fire-resistant junction box

Posted 6 years ago

Specialised coatings improve enclosure performance

Posted 6 years ago

Spelsberg claims largest selection of non-metallic enclosures

Posted 7 years ago

Spelsberg WKE enclosures used for emergency systems

Posted 7 years ago

Bespoke moulding service speeds up repeat orders from Spelsberg

Posted 7 years ago

Customised enclosures help prevent freezing pipes

Posted 7 years ago

Service over supply from Spelsberg

Posted 7 years ago

Spelsberg appoints David Mills as Area Sales Manager for NW

Posted 7 years ago

Chris Lloyd confirmed as Spelsberg UK MD

Posted 7 years ago

Abox Magic GT gel provides IP68 ratings to 15 metres

Posted 7 years ago

How to select correct IP ratings for electrical enclosures

Posted 7 years ago

An introduction to electrical enclosure specification

Posted 7 years ago

Customised enclosures reduce costs and improve quality

Posted 7 years ago

Flexibility and reliability for airflow control unit enclosures

Posted 8 years ago

Spelsberg reduces lead times with new UK headquarters

Posted 8 years ago

Composite junction boxes for aircraft carrier lighting systems

Posted 8 years ago

Understanding ingress protection in electrical enclosures

Posted 8 years ago

Spelsberg will improve lead times on customised products

Posted 8 years ago

Non-metallic enclosures: the future for trackside installation

Posted 8 years ago

Revamped GTi range speeds up switchgear installation

Posted 8 years ago

Spelsberg UK sales team is strengthened with new appointments

Posted 8 years ago

Spelsberg launches its 'Space for you' campaign

Posted 8 years ago

New B-Box from Spelsberg offers quick, waterproof installation

Posted 8 years ago

Which is the best material for your application's enclosure?

Posted 9 years ago

Waterproof gel-filled enclosures are reusable

Posted 13 years ago

Non-metallic enclosures cope with harsh outdoor environments

Posted 13 years ago

Rugged Norma PC and ABS enclosures are sealed to IP65

Posted 13 years ago

IP66 enclosures selected for water shut-off valve controls

Posted 13 years ago

Custom junction box moulded in high-grade black plastic

Posted 13 years ago

Spelsberg products available through Farnell

Posted 14 years ago

Modular enclosures maintain IP65 protection

Posted 14 years ago

Rugged enclosures are suitable for fire engine applications

Posted 14 years ago

TK enclosures are tough enough for classrooms

Posted 14 years ago

More applications