Posted to News on 30th Nov 2018, 09:53
Connector with built-in surge protection for instrumentation
Harting has developed a protective circuit housed within a modular connector in order to protect common signals in the instrumentation and control (I&C) area. This means that both digital and analogue circuits are securely protected.
Since these signals can be of different types, in addition to a modular combination for I&C signals with common reference potential (generally digital signals), Harting also offers a combination for differential signal transmission or for transmission without a common reference signal.
These signals are generally differential types such as bus interfaces up to 5MHz or analogue signals such as 0/4-20mA or 0/2-10V. Both types - two-channel types for differential signals and four-channel types for signals with common reference potential - can transmit nominal 24V DC and up to 0.5A. The protection level is approximately 50V, depending on the type.
Transients, which can disturb signal circuits and destroy electronic devices, are discharged to the ground via an appropriate spring element and the grounded Han-Modular hinged frame. This ensures interference-free transmission of the signal.
When used correctly, the surge protection modules reduce the number of operating faults, increase the service life of the production line and ultimately increase plant uptime. Additional costs are avoided and the profitability of the production plant is maintained.
Follow the link for more information about the Harting Han SP Module.
