Container loading system relies on cable extension transducers

Combilift, based in Ireland, is the largest global manufacturer of multi-directional forklifts and an innovator and leader in long-load handling solutions.

Its recently launched Combi-CSS (Container Slip-Sheet) enables fast and efficient freight container loading for the transportation of timber, flat-packed furniture, panel products and similar goods.

This innovative system features a large platform where goods are pre-loaded on a powered steel slip-sheet, and with integral laser-assisted container alignment and hydraulic levelling the slip sheet and its payload are driven directly into the container hold using Combilift’s patented push-pull mechanism.

Significantly reducing the full load loading time to as little as 6 minutes and ensuring safety and simplifying the loading process, the Combi-CSS control system relies on SGJ series cable extension transducers (CETs) from Variohm EuroSensor to monitor the slip-sheet’s position over CAN SAE 1939 for the loading and retracting procedure.

The 16-metre-long Combi-CSS is capable of loading up to 30,000kg in 20- to 40-foot containers with the alignment and load transfer process managed by a single operator. The slip-sheet material, Hardox 500, is an extremely hard grade of steel commonly used for large structural wear plate components in construction and mining equipment. With excellent resistance to scratching and surface scraping, these properties help maintain a low sliding friction for the loading and sheet retraction process.

The slip-sheet has several pairs of holes at equal intervals along its length and the push pull mechanism, which sits underneath, utilises powerful hydraulically driven linear actuators that engage with these holes in an alternating pattern to drive the sheet forwards for loading or backwards to retrieve the sheet. The distance travelled by the actuators for each push or pull cycle determines how far the slip sheet travels – with position controlled using displacement feedback from the SGJ series cable extension transducer.

The SGJ series CET from Variohm’s distribution partner TE Connectivity was chosen for its industrial grade quality and IP67 environmental protection rating. Its rugged glass-filled polycarbonate housing protects a precision high-cycle plastic hybrid rotary potentiometer in a spring-loaded cable and winding drum arrangement. The durable stainless-steel measuring cable is simply attached to the moving element in a ‘free-release’ tolerant design that safeguards against damage if the cable is accidentally released. A stainless-steel mounting bracket and industry standard M12 connector makes installation straightforward in any orientation.

With several output options available in the SG series, including voltage and current as well as CANopen versions, Combilift chose the SGJ model with an integrated CAN SAE J1939 output communication profile – which is widely used on mobile equipment and factory automation applications and interfaced seamlessly with the CSS’s control system. The zero to 80-inch measurement version (2032 mm) provides an accuracy of 0.5% and a full-scale repeatability to 0.02%.

The position data, in 12-bit resolution, and device status information is transmitted as ‘Proprietary B’ messages over the J1939 network. The Node ID, baud rate and date rate options are easily set using dip-switches and versions are available with or without terminal resistors. The 80-inch travel version can be mounted in a volume of less than 100 x 67 x 127 mm; a larger 120-inch travel version is also available.

CETs, sometimes referred to as ‘string pot sensors’ provide a cost-effective technology for long travel linear displacement measurement and find use across industrial applications such as mobile construction and forklift vehicle safety monitoring, winch and crane position feedback, large agricultural machines, flood management systems, etc. Variohm supplies CETs in miniature designs with position measurement as small as 40 mm through to long travel models with over 40 metres linear measurement capability. The sensors used in CETs include rotary potentiometers, incremental encoders and multi-turn absolute encoders. Output options cover all industry standard voltage and current output levels as well as digital pulse and bus communication protocols.

Cable actuated technology requires no critical alignment and suits applications where space is limited or where moving components may be submerged, deep underground or partially obscured by other equipment. Variohm’s comprehensive range of CETs are easily adapted for use in harsh environmental conditions with IP68 protection ratings and application matched versions supplied with hazardous area certification.

Variohm-EuroSensor Ltd

Williams Barn
Tiffield Road
NN12 6HP

+44 (0)1327 351004

More news
2 hours ago
RS awarded platinum-level sustainability rating by Ecovadis
RS Group has been awarded a platinum medal by Ecovadis, the independent provider of global sustainability ratings used by many large organisations to help support sustainable purchasing decisions.
23 hours ago
Sensor software up for industry 4.0 innovation award
The success of Baumer’s BSS sensor software has been acknowledged with it reaching the final round of the prestigious Industrie 4.0 Innovation Awards 2022. An independent jury nominated the software as contributing significantly to smart manufacturing.
1 day ago
Emka collaborates with enclosure OEM on new handle
Emka has worked with Italian control cabinet manufacturer MP Gamma to develop a newly designed handle with changeable lock inserts, with the enclosure company looking to modernise the design of its portfolio.
1 day ago
Webinar explores creating OEM-standard bodywork seams
The latest innovations in sealing technology make it possible for any body shop to replicate seams that are as good as new. In a webinar on the subject on 10 November 2022, Henkel will give delegates the benefits of its wide expertise.
2 days ago
European Springs invests in prototyping proficiency
Ensuring it maintains its position at the forefront of prototyping in the industry and is able to deliver industry leading laser-cutting speeds, European Springs and Pressings has purchased a Bodor i5 2KW fibre laser-cutting machine.
2 days ago
Omron launches cobot and AMR ROI calculator
A new ROI calculator from Omron has been launched to support the process of evaluating an investment in collaborative and mobile robots, including easy and affordable leasing opportunities that are ideal for small and medium enterprises (SMEs).
2 days ago
Mitsubishi Electric exhibits at the North East Automotive Expo
Mitsubishi Electric is showcasing how its automation technologies can drive the entire electric vehicle value chain forward at the North East Automotive Expo 2022, taking place on 29th September 2022.
3 days ago
Farnell increases investment in Traco Power portfolio
Farnell has increased its investment in Traco Power to ensure product availability and overcome supply chain challenges. Farnell now stocks Traco Power’s most popular ranges including high-performance DC/DC converters, AC/DC power supplies and DIN rail products.
3 days ago
Visitors to see the benefits automation offers at PPMA 2022
CKF Systems is delighted to be exhibiting at PPMA 2022 where it will be sharing with visitors the benefits of robotics and automation through live demos and video footage of real-world systems in action.
4 days ago
Vacuum system saves energy for Noelle + von Campe
Atlas Copco has supplied German glass producer Noelle + von Campe with three GHS 4600 VSD+ screw vacuum pumps. The Atlas Copco GHS VSD+ series of vacuum pumps are a range of highly efficient, intelligent vacuum pumps with Variable Speed Drive (VSD) technology.

Login / Sign up