elobau expands range of angle sensors

And that’s good news for mobile machinery designers!

elobau has added the 424S variant to its angle sensor portfolio. This, it states, means mobile machinery designers now have an angle sensor with a combined output signal available.

“The elobau sensors from the 424 series are precisely tailored to their area of application – the latest addition to the angle sensor family: the 424S. This angle sensor is designed to measure the angle of pedals in agricultural machines, building machinery and industrial trucks, among other things.

Thanks to the combined output signal, the 424S stands out from the other variants, as the angle sensor has an analogue output as well as a switching output. This means that a single sensor can now output both signals. 

Specialist for clutch pedals

The new variant is particularly of interest for use in clutches. Where previously an angle sensor and a position switch had to fit in the confined space at the same time, the 424S is now the only sensor that combines the output signal, this reduces the number of components, simplifies installation, and saves installation space.

Machine manufacturers not only save on procurement costs, but also subsequent maintenance and servicing. Another advantage for manufacturers of mobile machines: the 424S angle sensor can be precisely adapted in the factory for the exact requirement.

Technical details at a glance

Like all other products, the 424S is produced in a carbon neutral manner at elobau. The temperature range from -40°C to +85°C and the IP67 protection class proves its resistance to harsh working conditions. The angle measuring range of the sensor is between 30° - 120° and achieves a resolution of 0.1°. By detecting this smallest possible change, it is possible to see the precision with which the new angle sensor can work.

In addition to the proven analogue outputs, the switching output is available as push-pull, high-side or low-side and switches up to 1.5 A switching current. The connection to the board electronics is easily implemented by means of Deutsch connector DT04-6P.

 

The 424S angle sensor can be precisely adapted in the factory for the exact requirement, says elobau.
The 424S angle sensor can be precisely adapted in the factory for the exact requirement, says elobau.

Elobau UK Ltd

3G, Manchester International Office Centre
Styal Road
Manchester
M22 5WB
UNITED KINGDOM

+44 (0)161 974 3250

uk-sales@elobau.com

https://www.elobau.com/en/

More from Elobau UK Ltd

Getting a firm grip on mobile machinery

Posted 2 months ago

Machine builders ‘armed’ for action!

Posted 4 months ago

elobau expanding its range with new immersion float switch

Posted 5 months ago

Flexible fill level sensor with analogue signal

Posted 5 months ago

2U Ultrasonic sensor for industry

Posted 6 months ago

elobau receives major environmental award

Posted 6 months ago

elobau helps make electric vehicle with chemical-free weedburner

Posted 1 year ago

How tilt sensors ensure stability of platforms, lifts and cranes

Posted 1 year ago

New elobau sales engineer for industrial and off-highway sectors

Posted 1 year ago

CAN module simplifies connection of controls and sensors

Posted 2 years ago

Ultrasonic sensors for distance measurement

Posted 2 years ago

Miniature float switches suit medical applications

Posted 2 years ago

Ultrasonic sensors used in AquaBattery's innovative Blue Battery

Posted 2 years ago

See elobau's latest products at SPS 2019

Posted 2 years ago

12mm push buttons for joysticks and control panels

Posted 2 years ago

Operator controls for industrial applications

Posted 2 years ago

elobau float switches contribute to simple membrane distillation

Posted 2 years ago

elobau - creating sustainable solutions

Posted 2 years ago

New ATEX ultrasonic measurement sensors

Posted 2 years ago

Rüdiger Köhler joins elobau's executive board

Posted 2 years ago

Reliably measure angles up to 360 degrees

Posted 2 years ago

Visit the elobau stand at SPS IPC Drives 2018

Posted 3 years ago

Hygienic and food-safe machine safety products

Posted 3 years ago

Non-contact safety sensors for meat processing machines

Posted 3 years ago

See elobau machine safety at Engineering Design Show 2018

Posted 3 years ago

Accurate and ergonomic machine control with elobau thumbwheel

Posted 3 years ago

N5 tilt sensor with 360 degree measurement from elobau

Posted 3 years ago

elobau are exhibiting at the PPMA show 2017

Posted 3 years ago

Troubleshooting safety systems from around the world

Posted 3 years ago

Precise, versatile, reliable: elobau's new ultrasonic sensors

Posted 3 years ago

elobau to exhibit at NFPC Industry Open Day 2017

Posted 3 years ago

ATEX Safety Sensors from elobau

Posted 4 years ago

Fingertip joystick J1 from elobau

Posted 4 years ago

Ultrasonic level measurement from elobau

Posted 4 years ago

elobau are exhibiting at the Engineering Design Show 2017

Posted 4 years ago

Suction pipe with level monitoring from elobau

Posted 4 years ago

Production machinery refurbishment & upgrade improves efficiency

Posted 4 years ago

Thumbwheels for operational control from elobau

Posted 4 years ago

Sensor Select: configure your own machine safety sensor

Posted 4 years ago

IRIS pipeline X-ray inspection system: safety and simplification

Posted 5 years ago

elobau to exhibit at NFPC Industry Open Day 2017

Posted 5 years ago

eloFlex - Configurable Safety Control Units from elobau

Posted 5 years ago

Compact M12 stainless steel safety sensor from elobau

Posted 5 years ago

elobau are exhibiting at the Engineering design show 2016

Posted 5 years ago

elobau IP69K emergency stop push buttons and safety relays

Posted 5 years ago

eloProtectE RFID machine safety sensors need no safety relay

Posted 5 years ago

elobau to exhibit at Manufacturing & Engineering Northeast 2016

Posted 5 years ago

elobau to exhibit at Drives and Controls 2016

Posted 5 years ago

eloProtectM magnetic safety switches are robust and reliable

Posted 5 years ago

New ergonomic JFT fingertip joystick from elobau

Posted 5 years ago

elobau to exhibit at NFPC Industry Open Day 2016

Posted 5 years ago

Robust aluminium safety interlocks from elobau

Posted 5 years ago

elobau to exhibit at Empack 2017

Posted 5 years ago

New Hall-effect angle sensor with CANopen communications

Posted 6 years ago

elobau's new Zero Speed Monitor for safe machine operation

Posted 6 years ago

Analogue level sensor with programmable switching points

Posted 6 years ago

eloProtect machine safety switch range enhanced

Posted 6 years ago

'Intelligent' expansion modules maintain PLd for series sensors

Posted 6 years ago

Compact "˜all in one' safety switch with safe output

Posted 6 years ago

elobau IP69K emergency stops make machine safety simple

Posted 6 years ago

Broken Finger Switch 204KS from elobau

Posted 6 years ago

Coded magnet safety switches with 20N holding force

Posted 7 years ago

eloProg modular safety controller is easy to configure

Posted 7 years ago

New M12 stainless steel cylindrical safety switches

Posted 7 years ago

Cost-effective eloFlex safety controller is configured to order

Posted 7 years ago

More news

Login / Sign up