Enamel-coated pH sensors offer advantages over glass types

The monitoring of the pH of liquid media in high-end hygienic processes - in biotechnology, pharmaceutical and food processing - ensures not only that legal requirements are met, but also that quality standards are maintained, thereby reducing cost and ensuring optimum yields.

In these high-end processes, the life of the pH sensor is a tough one; typically it has to withstand cleaning with acids and caustic solutions under high temperatures, as well as steam purification. This would not be a problem but for the fact that most pH measurement is carried out using glass electrode pairs.

Glass is vulnerable to both physical damage and chemical attack; strong acids and strong alkaline solutions attack the glass membrane of pH sensors, and even neutral solutions containing high concentrations of alkali ions - sodium ions, in particular - also assault the glass. Adding to these problems, the vulnerability of glass to chemical attack increases with temperature. For every 30degC rise in temperature, the rate of attack increases ten-fold. Consequently, electrode life is reduced when the pH sensor is used in process solutions at elevated temperatures, or when the glass formulation of the sensor is inappropriate for the sensed medium.

Glass systems also need special care against the effects of dehydration. Left out of solution, a pH glass membrane will gradually dehydrate, which can affect its performance; the sensor will have slower response and a higher than normal impedance when put back into operation.

Dehydration can also affect the operation of the reference electrode in glass systems, preventing proper operation. The electrolyte can leach out of the electrode cavity, through the junction(s), forming salt crystals on the junction surface. Over time the leaching weakens the electrolyte potential and may cause a phenomenon known as a 'bridging effect'.

Both of these conditions will increase the output impedance, making the output of the reference electrode unstable. Moreover, with continued dehydration the impedance will rise to a level that renders the pH meter unusable.

Enamel-coated pH sensors

The limitations and special requirements of glass-based pH systems, have led to the development of a new generation of pH sensors manufactured from stainless steel and coated with enamel. Compared with conventional glass electrodes, enamel-coated sensors offer a number of major operating benefits. First, they are largely unbreakable and, consequently, less susceptible to errors in production. Second, they can be cleaned in place (CIP), saving users both time and cost by removing the requirement for sensor removal, cleaning and recalibration. Third, the sensor can be left dry for extended periods - for as long as the user requires - without any drying out or loss of performance. Fourth, the enameled finish provides high levels of non-stick performance for high hygiene while pH values are measured - and it can be used in media with a high proportion of solid particles. Fifth, the sensors require recalibration only once or twice a year; maintenance is limited to the yearly exchange of the reference electrolyte supply bottle. Six, the sensors have no moving parts or additional electric or pneumatic actuators, so the complexity of central process control is reduced.

The ability of enamel ph sensors to allow CIP is critical, as sterility is key in ensuring that biochemical reactions can proceed cleanly, with maximised sterility and with no effects on the end product. In contrast, opening up of the process, as was the case with glass sensors, where sensors had to be removed via special automated armatures and cleaned separately with chemicals before being recalibrated, risked bringing germs or contamination into the process.

Burkert's new Type 8201 measuring system represents the latest generation in enamel pH sensors. The system has a 'fit-and-forget' design that enables its sensor to stay in process, even during CIP purification.

The hygienic design and robust, glass-free construction of the 8201pH sensor mean that the unit is particularly suitable for use in high-end hygienic processes; for example, in the production of foods and active ingredients where the pH value of liquid mediums - including those which are viscous or contain solids - is measured.

In addition, the 8201 provides a long service life in these processes and high levels of accuracy, with its ability to measure absolute pH values between 0 and 12 at medium temperatures up to 140degC, and process pressures up to 6bar.

Described as easy-to-use, the 8201 pH sensor is a highly integrated device, operating as a single-rod measuring cell with the measuring electrode and reference electrode combined in one element. The sensor probe is a stainless steel tube, which also houses a Pt 1000 sensor for temperature compensation. It is coated with an ion-sensitive enamel layer, providing an extremely smooth surface that prevents media from sticking during measurement, thereby making the sensor very easy to clean.

Unlike many glass probes that have electrolytes that dry out in air, the 8201 sensor can be left dry for extended periods without any drying out or loss of performance. The electrolyte is stored in a separate electrolyte vessel and permanently connected to the electrode via a hose. The pressure of the electrolyte vessel is maintained slightly above process pressure by means of an attached pressure controller.

Burkert Fluid Control Systems

Fluid Control Centre
1 Bridge End
Cirencester
GL7 1QY
UNITED KINGDOM

+44 (0)1285 648720

sales.uk@burkert.com

www.burkert.co.uk

More from Burkert Fluid Control Systems

FLOWave success flows on

Posted 3 weeks ago

Breath of fresh air

Posted 1 month ago

New video just released by Burkert

Posted 1 month ago

In pursuit of hygiene, accuracy and cost-effectiveness

Posted 1 month ago

Fast action steps up effectiveness of patient care

Posted 2 months ago

The right brew for steam temperature control

Posted 2 months ago

Long life to continuous control valves

Posted 2 months ago

Unifying the process control network

Posted 3 months ago

Bürkert valves ensure latest standards prevail

Posted 4 months ago

Sweet success for process control reliability

Posted 4 months ago

Full steam ahead for training

Posted 4 months ago

Process valve island increases dosing accuracy

Posted 5 months ago

Carbon capture technology on the rise

Posted 6 months ago

Water treatment improvements for power station hit full flow

Posted 7 months ago

Network integration – search for value and simplicity

Posted 7 months ago

ATEX certification for new pneumatic valve island

Posted 8 months ago

Ironing out the doubt: iron measurement in water quality analysis

Posted 8 months ago

Flowmeter range expands

Posted 9 months ago

Pure water: quality monitoring is a vital asset

Posted 9 months ago

New flow controller for low volumes

Posted 10 months ago

Delivering high precision for time-pressure microlitre dosing

Posted 11 months ago

Monitoring reverse osmosis systems

Posted 1 year ago

Online water analysis module continuously measures iron content

Posted 1 year ago

Movie of the month

Posted 1 year ago

Time-pressure controller for high-precision microlitre dosing

Posted 1 year ago

How to simplify industrial process automation using IO-Link

Posted 1 year ago

Multi-parameter flow meter cuts waste by identifying fluids

Posted 1 year ago

Burkert invests in fully automated multi-medium testing facility

Posted 1 year ago

Burkert UK now supplying customisable micro precision pumps

Posted 1 year ago

Bürkert appoints new Account Manager for the South West

Posted 1 year ago

Smart valve positioner features IO-Link connectivity

Posted 1 year ago

Bürkert delivers savings for new life science facility

Posted 1 year ago

How to choose the right process control valves

Posted 1 year ago

Controller achieves micro-precision for time-pressure dosing

Posted 1 year ago

Intelligent valve islands for process automation applications

Posted 1 year ago

Retrofitted control heads extend life of 200 process valves

Posted 1 year ago

Enhanced radar level measurement for hygienic applications

Posted 1 year ago

Bürkert microfluidics expertise improves antibody discovery

Posted 1 year ago

Bürkert launches compact Type 6164 cartridge valve

Posted 2 years ago

Continuous monitoring and analysis of water quality

Posted 2 years ago

What is needed to improve fuel cell technology?

Posted 2 years ago

Flow measurement in the food and beverage sector

Posted 2 years ago

Bürkert virtual exhibition stand offers web and VR experience

Posted 2 years ago

Integrated water quality monitoring for water treatment service

Posted 2 years ago

Movie of the month

Posted 2 years ago

Flexible water analysis system saves time and money

Posted 2 years ago

Bürkert UK expands stock of standard process valves

Posted 2 years ago

Hygienic flowmeter specified for pharmaceutical cleaning system

Posted 2 years ago

Process control expertise at the ISPE Europe Annual Conference

Posted 2 years ago

Flowmeter gains the ability to detect different fluids

Posted 2 years ago

Finding the right partner for hygienic process control projects

Posted 2 years ago

Burkert UK expands product range and increases stockholding

Posted 2 years ago

Brewery upgrade improves reliability

Posted 2 years ago

multiCELL controller supports Champagne production

Posted 2 years ago

Support for system integrators

Posted 2 years ago

Burkert contributes to more efficient fluid control system

Posted 2 years ago

Burkert to exhibit hygienic products at EHEDG Conference 2018

Posted 2 years ago

Patties still a firm favourite thanks to 10-year-lasting valves

Posted 2 years ago

Multifunction controller features Ethernet connectivity

Posted 3 years ago

Solenoid control in potentially explosive atmospheres

Posted 3 years ago

New monitoring system simplifies micro-filtration of water

Posted 3 years ago

Micro-dosing technology and process integration

Posted 3 years ago

Using automation to improve process water quality

Posted 3 years ago

Movie of the month

Posted 3 years ago

Optimising repeatability and efficiency through automation

Posted 3 years ago

New flowmeters to look out for in 2018

Posted 3 years ago

Simplified process control for reverse osmosis plant

Posted 3 years ago

Comparing flowmeters: Coriolis vs. Surface Acoustic Wave

Posted 3 years ago

Precision control for CIP processes

Posted 3 years ago

Pneumatic valve island improves flexibility and diagnostics

Posted 3 years ago

Bürkert's new valve control heads provide networking options

Posted 3 years ago

Using Industry 4.0 to optimise process control

Posted 3 years ago

Re-engineering diaphragm valves

Posted 3 years ago

Taking pneumatic process control to a new level

Posted 3 years ago

Precise flow control for efficient, accurate pneumatic conveying

Posted 3 years ago

High-temperature control for exhaust analysis

Posted 3 years ago

Burkert: managing a culture of innovation

Posted 3 years ago

More function modules for Burkert compact water analysis system

Posted 3 years ago

Bürkert Pneumatic Control Valve Island interfaces with ET 200SP

Posted 3 years ago

Wave of success for new flowmeters"¦

Posted 4 years ago

Bürkert UK extends customisation and assembly service

Posted 4 years ago

Optimum level and flow control for food industry processes

Posted 4 years ago

Minimising waste in hygienic control valve applications

Posted 4 years ago

Seal of approval for Bürkert solenoid valves

Posted 4 years ago

How to choose a surface coating technology

Posted 4 years ago

Bürkert increases stock levels to support maintenance market

Posted 4 years ago

Do Food & Beverage SMEs need more process automation?

Posted 4 years ago

New light-weight precision flow meter suits process skids

Posted 4 years ago

Developing an alternative to Coriolis

Posted 4 years ago

Improving flow control in pneumatic conveying systems

Posted 4 years ago

Delivering on the requirement for ATEX control panels

Posted 4 years ago

Bürkert maintains price freeze for 2017

Posted 4 years ago

Bürkert offers fast delivery on full-bore mag flowmeters

Posted 4 years ago

Bürkert appoints new account manager for Ireland

Posted 4 years ago

Steam control valves: getting the most from this vital component

Posted 4 years ago

New networkable hygienic valve actuators from Bürkert

Posted 4 years ago

Pneumatic valves for SIL1 or SIL2 safety control systems

Posted 4 years ago

Bespoke process control systems for the food & beverage industry

Posted 4 years ago

Electromotive process valves deliver precision alternative

Posted 5 years ago

Clinical diagnosis benefits from design collaboration

Posted 5 years ago

Keeping control valves clean, inside and out

Posted 5 years ago

Hygienic 2-way bellows control valve for small flow rates

Posted 5 years ago

Upgrading process safety with compact control valves

Posted 5 years ago

Top 10 level-sensing technologies

Posted 5 years ago

Fast, reliable switching without pneumatics

Posted 5 years ago

Retrofit safety using innovative control valves

Posted 5 years ago

Bürkert launches Virtual Water Treatment Works

Posted 5 years ago

Building selective catalytic reduction systems

Posted 5 years ago

Emerging food preservation technology requires precision control

Posted 5 years ago

Precision gas control for experimental combustion rig

Posted 5 years ago

Electromotive process valves make compressed air obsolete

Posted 5 years ago

Meeting the demand for more complex process control systems

Posted 5 years ago

Bürkert cartridge valve is suitable for custom manifold designs

Posted 5 years ago

Developing new fluid management systems for in-vitro diagnostics

Posted 5 years ago

Bürkert launches hydroformed hygienic diaphragm valve

Posted 5 years ago

Bürkert improves functionality of ELEMENT controllers

Posted 5 years ago

Gas control for metal surface treatments

Posted 5 years ago

Measuring pH in a food-safe environment

Posted 5 years ago

Process control design - don't let ATEX restrict your plans

Posted 5 years ago

Bürkert application segmentation delivers across industries

Posted 5 years ago

Desktop autoclaves achieve reliability with Bürkert steam valves

Posted 5 years ago

Designs for controlling hot processes - it's all material

Posted 5 years ago

Controlling CIP / SIP in food processing applications

Posted 5 years ago

Energy saving with process valves

Posted 6 years ago

Solenoid valves - one for every occasion

Posted 6 years ago

Bürkert valve expertise delivers a premium shower experience

Posted 6 years ago

Control of water treatment with Bürkert multiCELL

Posted 6 years ago

Solenoid valves - some are more equal than others

Posted 6 years ago

Design & maintenance crucial to avoiding water hammer

Posted 6 years ago

Bürkert hazardous area-rated pneumatics in whisky bottling plant

Posted 6 years ago

Under Pressure - sensors in the spotlight

Posted 6 years ago

All new Bürkert website: cool tools, easy navigation and eShop

Posted 6 years ago

Bürkert helps to improve efficiency at UK car engine plant

Posted 6 years ago

Autoclave uses compact Bürkert process valves to meet targets

Posted 6 years ago

Free solenoid valve selection chart offered by Bürkert

Posted 6 years ago

Solenoid valves - an enduring design refined over time

Posted 6 years ago

Intelligent control for food processors

Posted 6 years ago

Bürkert's fluid control expertise now available direct to OEMs

Posted 6 years ago

Bürkert's multiCELL provides localised sensor signal management

Posted 6 years ago

Water control and analysis system with plug-in Sensor Cubes

Posted 6 years ago

Making the grade - achieving compliance with food standards

Posted 7 years ago

Bürkert releases new flowmeters for high-volume gases

Posted 7 years ago

Sensors 101: understanding sensors within a fluid control system

Posted 7 years ago

Modular valve body reduces energy needs and improves system flow

Posted 7 years ago

Sizing of pipework for steam applications for reliable operation

Posted 7 years ago

New valve body concept simplifies complex pipe interfaces

Posted 7 years ago

Design and components for pneumatic control automation systems

Posted 7 years ago

Improved functionality for batch controller and flow transmitter

Posted 7 years ago

Efficient bespoke effluent monitoring and batch control systems

Posted 7 years ago

Intelligent valve reduces pipework by switching multiple flows

Posted 7 years ago

Control signals - which option is best?

Posted 7 years ago

Steam expertise reduces costs in pet food production

Posted 7 years ago

Bürkert Technical Training to provide local options for 2014

Posted 7 years ago

Local development process delivers micro-fluidic valve systems

Posted 7 years ago

Electrically actuated quarter-turn valves for a range of options

Posted 7 years ago

Steam: how to manage it safely & efficiently

Posted 7 years ago

Free guide matches valves with chemical resistance properties

Posted 7 years ago

Fruit syrup production benefits from smart valve control

Posted 7 years ago

Tried and tested valve design nears 50 years of reliable service

Posted 7 years ago

Does your valve have the correct chemical resistance properties?

Posted 7 years ago

Microfluidics - micro dosing pump is precise and reliable

Posted 8 years ago

Integrated modular systems are key to precise gas handling

Posted 8 years ago

Bürkert improves control of water oxygenation

Posted 8 years ago

What's next in process control for the water treatment industry?

Posted 8 years ago

Retrofit control head enables automation of most process valves

Posted 8 years ago

Bürkert unveils new intelligent valve positioner

Posted 8 years ago

Bürkert reports excellent results from Total expo

Posted 8 years ago

Valves - when to repair or replace?

Posted 8 years ago

Bürkert launches new range of intelligent valve control heads

Posted 8 years ago

Seminar on valve innovation in the pharmaceutical sector

Posted 8 years ago

Free ATEX selection poster demystifies explosion criteria

Posted 8 years ago

Bürkert at Total Process & Packaging Exhibition 2013

Posted 8 years ago

New training brochure now available from Bürkert

Posted 8 years ago

Bürkert valves help TV science show with 360 degree swing

Posted 8 years ago

Direct-acting solenoid valves for fluids, gases, vacuum & steam

Posted 8 years ago

Free booklet for products and systems for producing clean steam

Posted 8 years ago

AS-I communication bus-equipped Element diaphragm valves

Posted 8 years ago

Bürkert UK officially opens the doors to its new UK headquarters

Posted 8 years ago

Fuel-cell race car relies on Bürkert valve technology

Posted 8 years ago

Bürkert Technical Training Schedule released for 2013

Posted 8 years ago

Burkert launches new butterfly valves

Posted 8 years ago

Burkert UK moves to new UK headquarters in Cirencester

Posted 8 years ago

Process valves that can "˜think' for themselves

Posted 8 years ago

AirLINE Quick valve island pneumatic system for process controls

Posted 8 years ago

Modern alternative to conventional variable area flow meters

Posted 8 years ago

Free Steam Site Guide aims to make steam systems safer

Posted 9 years ago

Design & Manufacture service for packaged batch controls

Posted 9 years ago

New multiCELL universal transmitter and sensor controller

Posted 9 years ago

Miniature valves for medical equipment reduce energy consumption

Posted 9 years ago

Three-tier approach for automation of hygienic processes

Posted 9 years ago

Free Select Catalogue provides faster fluid control deliveries

Posted 9 years ago

Multi-port valve interfaces meet life science plant requirements

Posted 9 years ago

Universal control head for hygienic processing industries

Posted 9 years ago

Flow transmitter and pulse divider combined in a single device

Posted 9 years ago

Express delivery for Namur interface valves from Burkert

Posted 9 years ago

Problem of contaminant ingress into diaphragm valves solved

Posted 9 years ago

Process automation quadruples brewery production

Posted 9 years ago

AirLINE Quick simplifies assembly of pneumatic control panels

Posted 9 years ago

Free training courses in Hygienic Processing

Posted 10 years ago

See Element process control products at Sensors + Systems

Posted 10 years ago

Digital flow transmitters are designed to be future-proof

Posted 10 years ago

Fountain control saves space, energy and money

Posted 10 years ago

Burkert extends Element range of process control components

Posted 10 years ago

Automated CIP saves pharmaceutical manufacturer £120,000 pa

Posted 10 years ago

PFA-lined stainless steel diaphragm valves resist corrosion

Posted 10 years ago

Type 2080 2/2-way valve with PTFE bellows for hygienic processes

Posted 10 years ago

Drinks manufacturer installs intelligent process valves

Posted 10 years ago

Multi-functional valve block for steam sterilisation systems

Posted 10 years ago

8175 ultrasonic level transmitter in IP65 or IP67 housings

Posted 10 years ago

Free courses: steam engineering and condensate management

Posted 10 years ago

Single controller for both process and proportional valves

Posted 10 years ago

Miniature solenoid valves specified for dosing machine

Posted 10 years ago

Element Neutrino analytical transmitters are more versatile

Posted 10 years ago

SideControl units achieve intelligent valve positioning

Posted 11 years ago

Customised ball valves used in fuel tank protection system

Posted 11 years ago

Burkert registers on Achilles Utilities Vendor Database

Posted 11 years ago

Ex-proof AirLINE Ex 8650 system chosen for North Sea project

Posted 11 years ago

Online monitoring of the reverse-osmosis systems

Posted 11 years ago

Control system replaces manual manufacturing process

Posted 11 years ago

Burkert appoints Fluid Controls as SE England distributor

Posted 11 years ago

How to save energy in hazardous area control systems

Posted 11 years ago

Miniature 3/2 isolation valve 'sets new benchmark'

Posted 11 years ago

Integrated liquid flow controller incorporates valve and sensor

Posted 11 years ago

Positioners/process controllers can mount on valve actuators

Posted 11 years ago

Spot welder 'tip off' detection using intelligent cooling system

Posted 11 years ago

Clever design halves the number of valves required

Posted 11 years ago

Compact flipper isolation valve delivers improved performance

Posted 11 years ago

Featured photo

Posted 11 years ago

Engine test rig benefits from globe valves and positioners

Posted 11 years ago

Valve and positioner provide test rig coolant control

Posted 11 years ago

Robolux valves eliminate deadlegs and save costs

Posted 11 years ago

Microfluidics offer benefits for automation and miniaturisation

Posted 12 years ago

Burkert and BBS-Systems partner for hygienic processing

Posted 12 years ago

New version of mxControl multi-parameter controller

Posted 12 years ago

New fluid control systems catalogue from Burkert

Posted 12 years ago

Bio-diesel processor developed with help from Burkert

Posted 12 years ago

Electrical and pneumatic systems in hazardous areas

Posted 12 years ago

Ultrasonic flow transmitter delivers long-term stability

Posted 12 years ago

Posted 12 years ago

Free Brewery Process Control brochure from Burkert

Posted 12 years ago

Burkert launches Element modular process control products

Posted 12 years ago

MicroFluidics catalogue of standard and bespoke systems

Posted 12 years ago

Pick-and-mix modular general-purpose solenoid valves

Posted 13 years ago

446-page catalogue covers all fluid control needs

Posted 13 years ago

More products