Enclosures provide safety and ease of use for laser interlocks

Laser Support Services, which designs interlock systems, works with Spelsberg UK as its enclosure partner, based on the quality and flexibility of the housings.

Interlock systems enable the safe use of lasers when operators aren’t present by ensuring that the area of operation is protected from unauthorised access. To suit varying locations, from university laboratories to wind tunnels, and still provide safe and simple use, they have to be secured with appropriate enclosures. These housings have to ensure the necessary protection and must also offer the installation flexibility that suits the design layout of the host environment.

Lasers are used within commercial and university laboratories across the UK for multiple purposes including research and measurement. As a result of health and safety issues relating to their use, including damage to the eye’s retina, safety precautions have to be deployed. Included within the requirements is a laser interlock system that prevents unauthorised access to a laboratory while a laser is in use. At the same time, the interlock allows the continued and safe operation of the laser without supervision, which may be required, for example, during scientific experiments.

Laser Support Services was founded over 30 years ago to provide service and support to laser users across various sectors and applications, from educational research to health and military. Previously reselling laser interlocks, in 2013 the company launched its own system. Laser Support Services’ interlock design comprises a main control unit as a master of the laser’s power supply and operation; a door control unit that authorises entry to the laboratory where the laser is in use; and a keypad that allows outside access to the lab.

Each unit has to be housed within a safe and durable enclosure with mounting flexibility dependent on the layout and configuration of each laboratory. Laser Support Services has used Spelsberg enclosures from the outset as a result of the build quality, ease of use, and level of service provided by the company’s UK team.

“We have to adapt the interlock system for individual laboratory requirements. Spelsberg provides boxes that are flexible and very simple to use, making them adaptable and suitable for every laser interlock project,” says Grahame Rogers, Laser Support Services’ managing director and founder. “Various mounting points enables flexible installation, combined with an in-house CAD service when required. The level of professionalism is very beneficial to us and our customers, and I value their support.”

The laser interlock’s main control unit comprises a master key switch and an E-stop, as well as energise and de-energise functions for manual system operation. The unit also incorporates an LCD display to show status and faults. Each of these user interaction features is integrated within a Spelsberg enclosure that is configured for the required mounting positions. The enclosure walls are either smooth or feature pre-stamped knock-outs for simple assembly, and Spelsberg’s UK site also features an in-house CAD design service if specific customisation is required.

Typically, Laser Support Services uses Spelsberg’s TK enclosures. This includes the highly durable, glass fibre reinforced polycarbonate TK PC, as well as the very light weight TK PS that is constructed from polystyrene. Both enclosures enable easy handling for a simple mounting process, while the TK PC is chosen for more rugged installation settings.

While the reinforced polycarbonate TK PC meets the high IK08 impact rating, the polystyrene TK PS box still achieves IK07, meaning impact resistance from 0.5kg dropped from 25cm. Both enclosures also provide ingress protection of up to IP66, giving Laser Support Services installation flexibility for wide-ranging settings, from wind tunnels to labs to clinics.

Even with knock out holes and customisation, the enclosures achieve high environmental protection, crucial for safe laser control. The TK enclosure’s gasket secures internal components from any outside moisture, and can operate in 95% humidity at 25°C.

Enclosures constructed from glass-fibre reinforced polycarbonate are also used, providing even higher impact resistance if required, offering up to IK08 protection, among the highest available levels. If Laser Support Services requires a large enclosure, for example when combining multiple control units, Spelsberg also provides mild steel housings.

As the setting differs between each laser interlock installation, which can also take place within existing buildings as well as integration within new developments, this means that the positioning of the system’s various control units has to be flexible to the locations space constraints. At the same time, the system must remain safe and simple to use for laboratory staff.

The system’s door control unit allows 30 seconds for the user to leave the laboratory, meaning that the closer the device can be positioned to the door, the safer and easier the system is to use. This requires flexibility in mounting and while 350mm x 250mm boxes are usually used, Spelsberg’s wide range of enclosure sizes means that the required dimensions are always available for the required setting.

While the enclosures that Laser Support Services typically requires are standard models, Spelsberg UK’s customisation service is available when required for fast turnaround of bespoke designs.

“Anything that makes operation easier for the customer is a benefit. When opportunities arise for specific enclosure adaptions, Spelsberg always provides a professional and effective service,” says Grahame. “The housings are extremely well constructed and Spelsberg forms a partner in providing Laser Support Services’ interlock systems.”

Spelsberg UK

Unit 1B Queensway Business Pk
Hadley Park West

01952 605849



More news
4 hours ago
Atlas Copco saves precision sheet metal manufacturer over £6,000 a month
When Constant Group, a Manchester-based supplier of sheet metal parts, components, and fully assembled fabrications pieces were let down by their previous service provider for onsite high-pressure nitrogen generation, they turned to Atlas Copco for help.
10 hours ago
Timber plant reduces downtime with NSK linear guides
Thanks to the adoption of NSK’s linear guides with K1 lubrication units, a timber manufacturer managed to reduce conveyor downtime by a factor of more than 12, prompting annual cost savings of more than €77,000.
1 day ago
Renishaw announces investment of over £50 million for UK site
Renishaw is to invest over £50 million at its Miskin site in South Wales to increase manufacturing capacity and to help meet its Net Zero emissions targets.
1 day ago
Manufacturing and Engineering Week opens its doors to innovation
The very first Manufacturing & Engineering Week got off to a flying start at Birmingham’s NEC with 5221 visitors attending over the two-day live event to celebrate the very best of British innovation, creativity and best practice.
1 day ago
HepcoMotion apprentice raises awareness of disabilities
First year manufacturing Apprentice Sky-Elouise Hopkins is keen to raise awareness of having a disability and being an apprentice.
1 day ago
Reliance achieves world first machining success
Reliance Precision Manufacturing has achieved what it believes is a world first – the machining of geared components from a bulk metallic glass (BMG) alloy especially selected and synthesised for space applications.
4 days ago
Yamaha demonstrates the power of robot teamwork
Automatica 2022 saw Yamaha Motor Robotics FA Section demonstrating industrial robots working together autonomously to raise productivity and reduce waste.
4 days ago
Telsonic UK doubles floorspace to meet demand
Despite the numerous challenges which have been present over recent times, brought on by a combination of the pandemic and the changing business landscape, Telsonic UK has not only weathered the storm but has doubled the size of its Poole facility to meet increasing demand for its ultrasonic modules, systems, and ultrasonic automated solutions.
4 days ago
Delta helps packaging manufacturer centralise control of facility
As a result of expansion, a manufacturer of plastic bags for food packaging that operates a factory in Poland decided it had too many machines to continue monitoring and controlling them individually. It turned to Delta for a solution for centralised control and management.
4 days ago
Robot cell increases productivity in pneumatic valve assembly
When CME was approached to develop a fully automated solution for pneumatic valve assembly, a six-axis robot is at the heart of the innovative system.

Login / Sign up