EPSG at the SPS IPC Drives 2013 - one network for all

"One network for all" is the motto of this year's Ethernet POWERLINK Standardization Group (EPSG) exhibit at the SPS IPC Drives show in Nuremberg, Germany, being held November 26-28, 2013. The demo installations at the EPSG booth (6-114/6-115) cover all aspects of future-oriented machine automation and underscore the top positions held by POWERLINK and openSAFETY as standards for industrial real-time communication and integrated safety technology.

Stefan Schönegger, managing director of the EPSG, says: "At the 2013 SPS IPC Drives show, anyone can see by the densely populated multi-vendor wall at the EPSG booth that POWERLINK ranks at the top of the list of real-time communication systems. Every day, the number of new POWERLINK-compatible products is growing across all automation segments."

More than 3000 OEMs are already placing their trust in this advanced real-time network for field devices. Deciding on POWERLINK is easy: the protocol features hard real-time properties at a high communication bandwidth, facilitating for instance high-precision axis synchronisation in parallel with video signal transmission over the same lines. On top of this, fully integrated safety solutions can be created using openSAFETY. Protective field functions of light grids, for instance, can be adapted to the requirements at hand without manual interaction. This high degree of integration greatly reduces wiring within machines.

Due to its compliance with the IEEE 802.3 Ethernet standard, POWERLINK can be used on any Ethernet infrastructure. In addition, both POWERLINK and openSAFETY are available as open-source software, so they are truly vendor independent.

To learn more about POWERLINK and openSAFETY please go to www.ethernet-POWERLINK.org, or visit EPSG at the SPS IPC Drives show in Nuremberg, Germany, November 26-28.

Ethernet Powerlink Standardization Group (EPSG)

Powerlink-Office
Kurfürstenstr. 112
10787 Berlin
GERMANY

+49 30 8508 8529

info@ethernet-powerlink.org

www.ethernet-powerlink.org

More from Ethernet Powerlink Standardization Group (EPSG)

LTI Motion's ServoOne servo drives now with POWERLINK interface

Posted 4 years ago

Performance boost with openPOWERLINK 2.3

Posted 4 years ago

Yaskawa integrates POWERLINK in DX200 robot controller

Posted 4 years ago

Industrial Ethernet now on Raspberry Pi2

Posted 5 years ago

Hannover Messe: Master redundancy implemented in POWERLINK stack

Posted 5 years ago

High-speed laser machines with POWERLINK and openSAFETY

Posted 5 years ago

Evaluation board from Hilscher with openSAFETY

Posted 5 years ago

SEPRO robots communicate via POWERLINK

Posted 6 years ago

High-speed weighing processes with POWERLINK

Posted 6 years ago

POWERLINK stack achieves record 20,000 downloads

Posted 7 years ago

POWERLINK at Eleventh India Forum

Posted 7 years ago

Powerlink - the open standard for the plastics industry

Posted 7 years ago

Extended safe robotics from B&R uses openSAFETY

Posted 7 years ago

POWERLINK speeds up with Intel controller

Posted 7 years ago

COMAU Robots use POWERLINK

Posted 7 years ago

EPSG openSAFETY workgroup meeting at Danfoss

Posted 7 years ago

Posital POWERLINK encoders for cost-effective migration

Posted 7 years ago

POWERLINK and openSAFETY for construction machines

Posted 7 years ago

Sensors by SICK and POWERLINK to speed up register control

Posted 7 years ago

Powerlink is highest National Standard in China

Posted 8 years ago

Powerlink and openSAFETY deliver power and data over slip ring

Posted 8 years ago

Powerlink enables robot to use hardware from three manufacturers

Posted 8 years ago

'Industrial Ethernet Facts' compares five real-time protocols

Posted 8 years ago

openSAFETY provides safety on all fieldbus systems

Posted 10 years ago

More news
20 hours ago
High-quality UK made ABS power supply cases
13A Plug-in and In-line styles from BCL Enclosures includes flame-retardant ABS models
1 day ago
Variohm Group buys Phoenix America
Based in Fort Wayne, Indiana ,Phoenix offers a range of absolute and incremental encoders, together with speed and proximity sensors, custom moulded magnets and more
1 day ago
New chain configurator aids machine builders
Tsubaki's recently unveiled configurator can make specifying chain a whole lot quicker and easier
1 day ago
Counterfeit bearings – NSK continues the fight against the fakes
The scale of the fake bearings problem has been highlighted with the discovery of around 23,000 counterfeit NSK packages and labels at a plant in Hebei Province, China
1 day ago
Parker launches new hydraulic fluid particle contamination monitor
The company’s icount LaserCM30 Particle Contamination Monitor is now available and can provide test results in 90 seconds
2 days ago
Last few places on Machinery Safety Course
Just a handful of places remain available on the last Pilz City & Guilds accredited Machinery Safety Course in 2020. Diary date is December 14th to 17th
2 days ago
Camozzi Automation launches new quick exhaust safety valves
Designed to provide a plug and play solution for OEMs that need to be compliant with Machinery Directive 2006/42/EC, Camozzi Automation says that its new quick exhaust 2-way safety valve range also complies with ISO 13849-1 covering the safe design of control systems which perform safety functions
2 days ago
SICK’s Open Service for IO-Link function blocks
A new open software service for control systems has been introduced by SICK
5 days ago
Automatic bearing lubrication brings ore inspiring results in mining
By installing automatic lubricators for bearings on its conveyor drive motors and belt pulleys, an opencast mine in Hungary has seen a range of benefits, including the prevention of unplanned downtime, longer bearing life and reduced repair work
5 days ago
Kinoulton company conveys COVID-combating masks
Here's a great example of the germ of an idea resulting in the combating of COVID