FeedThrough connectors for medical equipment

Cliff Electronics is launching two versions of its very successful FeedThrough connectors aimed at manufacturers of medical diagnostic and treatment equipment. Typical applications include medical devices for diagnosis, prevention, monitoring, treatment or alleviation of disease, clinical and home monitoring products, dental and cosmetic electronic equipment, modems, routers, security and PoE systems.

The new versions of the widely used USB2.0 A-A and CAT5e RG45 data connectors are moulded from white nylon to allow designers to integrate them into equipment where the most commonly available black versions would be out of place and spoil "the look" of the end product. Cliff's FeedThrough connector design allows standard, off the shelf, cables to be used for internal connectivity simplifying assembly.

Cliff's FeedThrough (FT) connectors are designed to be mounted in the industry standard 24mm-diameter XLR panel cut-out. With over 20 different connector types now available in this standard format, panel design and manufacture are greatly simplified. The new white USB2.0 A-A and CAT5e RG45 connectors are available with plain or countersunk mounting holes to facilitate assembly on the front or rear of control panels.

The wide range of FeedThrough connectors now available from Cliff allows designers to integrate audio, video, digital, optical, networking and data feeds into professional equipment for broadcast (studio and mobile), lighting, audio, medical, PoE and industrial applications, instrumentation and control connectivity.

The most popular connectors in Cliff's FeedThrough range are CAT 5e RJ45, CAT 5e Shielded RJ45, CAT 6 RJ45, CAT 6 Shielded RJ45, HDMI Female - Female, USB 3.0 A-A, USB 2.0 B-A and USB 2.0 A-A. All widely used in data and audio-visual applications.

A range of dust covers are now available to protect unused connectors from the ingress of dust. Push-in types in black or white may be used with RJ45 USB-A USB-B USB-C and USB3-B connectors including lanyards and gasket style versions in red, black and blue are suitable for the rest of the connector range.

John Hall, Managing Director of Cliff Electronics says: "There is rapid growth in new technology for medical diagnostic and treatment devices and cosmetic surgery while IT and PoE systems continue to become more sophisticated and require more complex connectivity for the IoT Industry 4.0 and Cloud Computing. The majority of these devices are packaged to fit into workplace or home environments where traditional industrial style connectors would look out of place and reduce the perceived quality and appropriateness of the product. Our flexible UK design and manufacturing means we can respond to changes in our customer's requirements and new markets quickly and cost effectively."

Follow the link to see the complete range of Cliff's standard and FeedThrough connectors.

Cliff Electronics Ltd

Holmethorpe Industrial Estate
Redhill
RH1 2PF
UNITED KINGDOM

+44 (0)1737 771375

sales@cliffukco.uk

www.cliffuk.co.uk

More from Cliff Electronics Ltd

New narrow FeedThrough connectors save panel space

Posted 2 months ago

Connectors designed and manufactured in the UK

Posted 9 months ago

FeedThrough connectors available as pre-assembled rack panels

Posted 10 months ago

Professional jack sockets with choice of switching contacts

Posted 1 year ago

Pre-assembled XLR connector rack panel saves time and space

Posted 1 year ago

Extensive range of fibre optic connectors, adapters and cables

Posted 1 year ago

Female-to-female USB-C FeedThrough connector fits XLR cut-out

Posted 1 year ago

Low-cost, low-profile VGA connector fits standard XLR cut-out

Posted 1 year ago

Extensive range of test probes, clips and plugs

Posted 1 year ago

Cliff offers empty reels for custom cables and test leads

Posted 1 year ago

Cliff adds Mini Displayport to FeedThrough connecter range

Posted 1 year ago

Cliff launches gold-plated 75ohm BNC FeedThrough connecter

Posted 1 year ago

Cliff launches new range of gold-plated terminal posts

Posted 1 year ago

Cliff launches CLIFFON locking power connector

Posted 2 years ago

Panel mount CAT3 RJ11 and RJ14 connectors from Cliff Electronics

Posted 2 years ago

Customisable recessed socket plate mount in standard XLR cut-out

Posted 2 years ago

Plastic-bodied feedthrough BNC connecter offers savings

Posted 2 years ago

Pre-assembled fibre-optic panels speed system assembly

Posted 2 years ago

High-speed Cat6A connector 24mm XLR panel cut-out format

Posted 2 years ago

ST fibre optic connector in 24mm Diameter XLR panel cut-out

Posted 2 years ago

Cliff's 24mm Diameter XLR Panel cut-out range extended

Posted 2 years ago

New IP68 waterproof cable assembly available from Cliff

Posted 2 years ago

UK-designed and manufactured earth testing cable reels at Cliff

Posted 2 years ago

Cliff FeedThrough Connectors: fast and simple panel assembly

Posted 3 years ago

Wide range of fibre optic connectors from Cliff Electronics

Posted 3 years ago

Key appointments at Cliff Electronics support sales growth

Posted 3 years ago

Cliff FT Connectors now available pre-assembled into panels

Posted 3 years ago

Gold-plated contact jack sockets now at Cliff Electronics

Posted 3 years ago

Cliff's Dual DC Power Socket now available in white

Posted 3 years ago

Dual USB2 and USB3 USB Sockets in an XLR Shell from Cliff

Posted 3 years ago

USB-C added to XLR format feed-through data connectors range

Posted 3 years ago

1U mounting panel for XLR format feedthrough connectors

Posted 4 years ago

Innovation and UK manufacture key to Cliff Electronics' growth

Posted 4 years ago

Cliff electrical test lead sets now widely available

Posted 4 years ago

Cliff Electronics appoints new Sales Engineer

Posted 4 years ago

Cliff expands XLR format feed-through data connectors range

Posted 4 years ago

Cliff Electronics partners with Newark Element14 in the USA

Posted 4 years ago

USB "˜gender change' connectors added to feedthrough range

Posted 4 years ago

Cliff adds high-speed USB to feed-through data connector range

Posted 4 years ago

Professional quality 3.5mm audio jack sockets

Posted 4 years ago

Cliff adds metal versions of Digital XLR Feed-Through Connectors

Posted 5 years ago

More products
4 hours ago
Post BREXIT notes for machine builders
Hold-Tech Files has just published a review of the post-BREXIT picture for machine builders, featuring answers to questions that will undoubtedly be common to many of us at the moment
9 hours ago
New all-in-one industrial PCs
With its newly introduced all-in-one (AIO) solutions, Phoenix Contact now offers industrial PCs with a completely closed die-cast aluminum housing (IP65)
1 day ago
Modular safety relay claimed to be world first
Pilz says that its all-new myPNOZ is the world’s first batch size 1 safety relay
1 day ago
Edge computing hardware and software choices for machine builders
RDS and AAEON offer machine builders an even greater choice of hardware and software to build high performance, integrated solutions for smart applications that require vision data to be processed at the edge
4 days ago
Certified Machinery Safety Expert course on 18th January
In conjunction with TÜV NORD, Pilz Automation UK is hosting its first CMSE Course of 2021. It starts on 18th January and lasts for four days
4 days ago
Improving communication with (and between) machines
Lenze has published a White Paper discussing PackML, a programming standard defined by OMAC, the Organisation for Machine Automation & Control. Here, Lenze's Marc Vissers provides machine builders with an insight into the paper
4 days ago
Danfoss buys Artemis Intelligent Power
Danfoss says it will allow them to begin the global commercial rollout of its Digital Displacement® pump technology, a disruptive low-carbon opportunity with applications in the industrial and off-highway markets
5 days ago
Quarter turn fastener that still turns heads
Automotive manufacturers are gradually making the transition from solely manufacturing vehicles to taking on more responsibility for the performance of a vehicle over its life cycle. As a result, OEMs are increasingly looking for ways to lower installation costs, and facilitate quick repeatable access to critical vehicle components in order to enable faster service calls
5 days ago
Wave spring or coil spring?
Simon Ward is Technical Manager at Uckfield-based fastener specialists TFC. Here he offers a machine designers a comparison between wave springs and round wire coil springs 
5 days ago
New course: Safety Design Incorporating EN ISO 13849-1/EN 62061
Pilz Automation UK says that this training course is designed to enable delegates to develop a greater understanding of the processes and standards related to safety control system specification, design and validation