Giant speed-controlled fans help to cut heating bills

Mitsubishi has supplied an innovative control system to enable Wardle Storeys to operate three 7.3m diameter fans and save energy.

A set of three 7.3m (24ft) diameter NASA-inspired fans is proving effective at saving energy for specialist materials manufacturer Wardle Storeys at its manufacturing facility in Earby, Lancashire. One of the keys to the system's success is the innovative control system supplied by Mitsubishi, ensuring the fan always runs at the optimum speed.

Fans are often regarded as excessive energy users rather than energy savers, but companies using MegaFan's 24ft HVLS (high-volume, low-speed) fans are reporting savings in excess of 50 per cent on their gas bills in the winter. Said to be capable of replacing up to 25 conventional fans, yet costing the same to run as one, the HVLS fan draws on a NASA-developed aerofoil blade design and takes into account the physical laws of air movement that conventional fan designs ignore.

Traditional small fans run at high speeds, using the speed itself to increase air displacement. But what the developers of HVLS fans realised was that, when it comes to the effective movement of air around a building, the displacement - the volume of air that is actually moved through the fan - is of no real significance. Instead, it is the down-stream effects that are important.

A turbulent, high velocity air jet dissipates very quickly, so can only have very local effects. In contrast, MegaFan's HVLS fan is designed to run at low speed, recirculating the huge reservoirs of hot air that frequently get trapped high in large buildings and warehouses, unable to escape. The developers of the HVLS fans recognised the energy-saving potential of recirculating this warm air that would otherwise be wasted.

HVLS fans use an aerofoil blade design that has the physical properties needed to maximise its ability to capture and circulate large volumes of air. The air output velocity was carefully calculated to optimise the air movement effects.

Example application

So what does this all mean in practice? A case in point is Wardle Storeys' manufacturing facility in Earby, Lancashire. Wardle Storeys is a world leader in the manufacture of specialist technical foils, acoustic materials, fabricated components and related products. These products are used across a wide spread of markets, including automotive, contract upholstery, building and construction, medical and stationery.

A recent project saw three HVLS fans installed at the Earby facility. The fan assemblies were clamped to an RSJ, with power taken from a busbar and a communication cable running between the fans and the control panel. The control panel itself was developed by MegaFan and Mitsubishi, allowing the variabl- speed drives on each fan to be individually controlled, with speed and direction adjusted as required.

The control panel features a touch-screen HMI from Mitsubishi's E1000 range, giving easy operation and visualisation of the fan network. The HMI has a high-resolution TFT display and a touch-screen interface, giving operators direct access to all the fan functions.

In winter, setting the fans to run at a low speed of around 30rpm draws vast quantities of warm air into the fan from reservoirs trapped in the ceiling, and gently pushes that air downwards. Wardle Storeys says it was able to reduce thermostat settings by 4degC and switch off one-third of the heaters in the building, while still maintaining a comfortable working environment. This energy saving contributes to direct cost savings in the heating bill.

Furthermore, in the summer months, increasing the fan speed to around 54rpm generates a pleasant cooling breeze, unlike the localised, intrusive blasts of air from conventional, smaller fans.

Innovative and effective

Mitsubishi Electric energy spokesman Jeff Whiting comments: "One of the biggest challenges facing industry today is rising energy costs. This can have significant negative impact on a company's financial performance, biting deeply into hard-earned profits - and all at a time when shareholders are demanding ever better returns on their investment.

"One of the ways of reacting to this challenge is through both innovative thinking and effective technologies. The installation at Wardle Storeys shows exactly what can be done."

The installation at Wardle Storeys shows how the combination of MegaFan's HVLS fans and Mitsubishi's control systems makes good business sense for companies, enabling them to increase the comfort of workers while at the same time significantly reducing their energy bills. Savings of 50 per cent in energy bills are regularly reported, and one study showed up to 84 per cent energy savings when an HVLS fan was compared to five conventional fans. Despite its size, the HVLS fan is said to be economical to buy and inexpensive to run. While the fan itself may be large, the motors running them are certainly not, as they are rated below 1.5kW.

Mitsubishi Electric Europe B.V.

Travellers Lane
AL10 8XB

+44 (0)1707 288780

More applications
51 minutes ago
Camozzi launches new UK short form catalogue
Camozzi Automation has launched its new UK short form catalogue, available both online and in hard copy format.
20 hours ago
NSK roller guides increase uptime of blow moulding machines
A manufacturer of PET (polyethylene terephthalate) bottles frequently had to replace the linear guides on its blow moulding machines. However, after switching to NSK’s RA series roller guides, there have been no failures for over a year, producing annual cost savings in maintenance, spare parts and downtime of €60,000.
22 hours ago
Design your future at Design Engineering Expo 2022
With innovation at its core, Design Engineering Expo 2022 is the perfect place for forward thinking design engineering professionals to gain insight into new technologies, learn how to improve efficiencies and gain inspiration for ideas they can implement into their workplace, to put them ahead of their competitors and form part of their future strategy.
1 day ago
Tray handling system gently handles medical-use glass cartridges
Gerresheimer Medical Systems Division produces over one billion high quality, medical grade, glass cartridges every year and central to its new post-production inspection and packaging system is the IEF Werner varioSTACK CF (Clean Factory) tray palletiser.
1 day ago
WDS reinforces stock availability with production machine upgrade
WDS Components has strengthened its stock availability of standard parts and components by upgrading its on-site production machinery.
2 days ago
Bostik present details of new 2K cyanoacrylate prototype
Bostik’s Born2Bond R&D team has released details of a new cyanoacrylate-based adhesive prototype at the ‘in-adhesives’ event, proving how products are being developed for a near-future that will see instant adhesives used for long-term critical applications.
5 days ago
Virtual factory and showroom tours provide access to best practices
Mitsubishi Electric is opening up access to its factory automation sites and showrooms through virtual tours with the aim of overcoming the restrictions on in-person visits caused by the pandemic.
5 days ago
Food-safe, tribo-optimised coating increases packaging throughput
A packaging and processing machinery builder has reduced drag, improved rigidity, increased throughput and raised hygiene standards on one machine family by applying an iglidur IC-05 tribo-coating on a mitre bar application.
6 days ago
Unlocking the benefits of micromotors at Design Engineering Expo
Small DC motor supplier EMS will be exhibiting the Faulhaber BXT-SC series and the AM3248 stepper motor at this year’s Design Engineering Expo, taking place at the NEC in Birmingham on June 8 to 9, 2022.
6 days ago
Advanced Engineering partners with SMMT and ADS
At this year’s Advanced Engineering UK, held at the NEC, Birmingham on 2-3 November, automotive and aerospace businesses will have the opportunity to meet with buyers from the sectors’ leading OEMs.

Login / Sign up